{"title":"Ceramic Tile Care","description":"\u003cp\u003eAll products suitable for ceramic and porcelain tiles.\u003c\/p\u003e","products":[{"product_id":"lithofin-mn-power-clean","title":"Lithofin MN Power-Clean","description":"\u003cp\u003eYour polished marble bathroom floor shows dull grey traffic lanes and ingrained soap scum that routine mopping no longer shifts. Lithofin MN Power-Clean breaks through this build-up in one pass, restoring the original gloss without etching the stone.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Power-Clean Does\u003c\/h2\u003e\n\u003cp\u003eMN Power-Clean is an alkaline intensive cleaner for natural stone. With a working pH of 10.5 it saponifies grease and loosens waxes, acrylics, and stubborn dirt. Undiluted it dissolves organic residues within 10 minutes; at 1:10 it still removes everyday film while remaining safe for acid-sensitive calcium carbonate surfaces.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished marble bathroom floor with soap build-up - dilute 1:10, 50-67 ml\/m². See \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eRough granite kitchen floor with fryer grease - dilute 1:5, 100-200 ml\/m².\u003c\/li\u003e\n\u003cli\u003eSandstone entrance saturated with foot traffic grime - apply undiluted, 5 m²\/L.\u003c\/li\u003e\n\u003cli\u003eRemoving dried \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eStain-Stop\u003c\/a\u003e residue on limestone vanity - use undiluted.\u003c\/li\u003e\n\u003cli\u003ePrep clean before sealing a terrazzo lobby - dilute 1:5, then rinse twice. Reference \u003ca href=\"\/en-ie\/pages\/stone-terrazzo\"\u003eterrazzo care page\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare a plastic bucket: add water first, then product per chosen dilution.\u003c\/li\u003e\n\u003cli\u003eDistribute with mop, white pad, or scrubbing machine at 50 rpm; keep surface wet for 5-10 min.\u003c\/li\u003e\n\u003cli\u003eAgitate stubborn zones with a nylon brush; do not let the solution dry.\u003c\/li\u003e\n\u003cli\u003eVacuum or mop up, then rinse with clean water until the rinse water runs clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage ranges 5-20 m²\/L. No drying time-once rinsed and surface is visually dry you may walk on it. Re-clean every 3-6 months as required.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eYou safely treat \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because the moderate alkalinity lifts organic soil without attacking calcium carbonate or silicate matrices. Do not use on aluminium fixtures, enamel, or waxed wood; mask such elements before cleaning.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor daily wipe-downs, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For oil spots that have penetrated deeply, follow with Lithofin OIL-EX paste. If you work on ceramic or porcelain, switch to KF Intensive Cleaner for faster action on glazes.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-wet highly porous sandstone to slow absorption and extend the 10 minute dwell time.\u003c\/li\u003e\n\u003cli\u003eOn vertical shower walls, start at the bottom and work upward to avoid streaking marks from concentrated runoff.\u003c\/li\u003e\n\u003cli\u003eNeutralise any residual alkalinity with a clear water rinse of at least 2 L\/m²-this prevents re-soiling films.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter \/ Per stuk","offer_id":56880111583564,"sku":"160-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter \/ Per stuk","offer_id":56880111616332,"sku":"160-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter \/ Doos van 10","offer_id":57401578127692,"sku":"160-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/160.webp?v=1772467358"},{"product_id":"lithofin-mn-outdoor-cleaner","title":"Lithofin MN Outdoor Cleaner","description":"\u003cp\u003eHeavy rain, UV and frost leave your terrace slabs blotchy; algae darken joints and barbecue grease sticks to the granite step. You spray Lithofin MN Outdoor Cleaner, wait two days and rinse: the original colour pops back and the surface loses its slippery film.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Outdoor Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eMN Outdoor Cleaner is an alkaline cleaner for outdoor stone, concrete and ceramic. The pH 12.5 formula releases active chlorine that oxidises leaf stains and tyre marks within 30 minutes and breaks protein-based dirt at the molecular level. No acid means zero etching on marble (Mohs 3) while the high alkalinity opens pores in hard \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e (Mohs 7) so that rinsing flushes the grime away.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSandstone patio after winter - use ready-to-use solution, 100 ml\/m².\u003c\/li\u003e\n\u003cli\u003eConcrete driveway oil haze - apply undiluted, 67 ml\/m².\u003c\/li\u003e\n\u003cli\u003eWood-look porcelain deck before sealing - dilute 1:3, 150 ml\/m².\u003c\/li\u003e\n\u003cli\u003eClinker garden path with leaf marks - ready-to-use, 100 ml\/m².\u003c\/li\u003e\n\u003cli\u003eFollow-up to \u003ca href=\"\/en-ie\/pages\/problem-outdoor-cleaning\"\u003eoutdoor-cleaning\u003c\/a\u003e step 1 (ALGEX) - undiluted, 80 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove loose dirt. Spray or water-can spread 67-200 ml\/m² according to soil level.\u003c\/li\u003e\n\u003cli\u003eWork in with a nylon brush; keep surface wet for 20 minutes.\u003c\/li\u003e\n\u003cli\u003eLeave 24-48 h; reaction time is weather-dependent (5-25 °C ideal).\u003c\/li\u003e\n\u003cli\u003eRinse with a hose or low-pressure washer from 30 cm distance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-15 m²\/L. Allow 24 h drying before sealing or foot traffic; full curing ends after 48 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula shines on \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e pavers, and \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e because oxidative cleaning does not rely on acid that could pit soft minerals. It is also safe for outdoor \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, limestone, porcelain and cotto when pre-wetted. Do not use indoors or over vegetation; cover plants first.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor living algae or moss apply Lithofin ALGEX first; after 24-48 h rinse, then clean with MN Outdoor Cleaner. For long-term stain prevention seal the dry surface with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Need an indoor deep clean? Pick MN Power-Clean instead.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm weather (15-20 °C) accelerates oxidation by 25 %, shortening dwell time.\u003c\/li\u003e\n\u003cli\u003eScrub across, not along, the grout lines; this avoids detergent pooling and gives uniform colour.\u003c\/li\u003e\n\u003cli\u003eRepeat annually in spring or autumn; regular cycles stop deep-rooted stains from setting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880111714636,"sku":"163-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880111747404,"sku":"163-11-B","price":50.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401579307340,"sku":"163-11-B-DOOS-10","price":140.76,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/163.webp?v=1772467364"},{"product_id":"lithofin-mn-builders-clean","title":"Lithofin MN Builders' Clean","description":"\u003cp\u003eFreshly laid granite steps show a stubborn grey haze, the slate hallway already has white efflorescence marks and the contractor leaves tomorrow. Builders' Clean removes that cement residue in one pass, leaving the stone ready for sealing or immediate use.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Builders' Clean Does\u003c\/h2\u003e\n\u003cp\u003eBuilders' Clean is an acidic cleaner for natural stone. With a pH of 1.4 it converts calcium-rich cement and limescale into soluble salts, releasing them from the surface within 3-5 minutes. Inorganic inhibitors limit attack on silicate minerals, so granite (Mohs 7) and basalt (Mohs 7) stay unchanged while up to 200 g\/m² of cement film dissolves.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen worktops, 1:3 dilution, to strip grout haze.\u003c\/li\u003e\n\u003cli\u003eInterior \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e floors showing limescale rings, 1:3 dilution.\u003c\/li\u003e\n\u003cli\u003eExterior sandstone paving with white \u003ca href=\"\/en-ie\/pages\/problem-efflorescence\"\u003eefflorescence\u003c\/a\u003e, 1:5 dilution.\u003c\/li\u003e\n\u003cli\u003eBasalt stairs after heavy building work, undiluted for cement drops up to 2 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eTerracotta\u003c\/a\u003e tiles before sealing, 1:10 dilution to protect soft surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet the stone until the surface darkens; leave no dry patches. Time: 2 minutes.\u003c\/li\u003e\n\u003cli\u003eApply solution with a nylon brush or low-pressure spray; use 100 ml\/m² at 1:3 dilution. Time: PT5M.\u003c\/li\u003e\n\u003cli\u003eAgitate with a white pad after 3 minutes contact; keep surface wet. Time: PT5M.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, vacuum slurry before it dries. Time: PT5M.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 5-15 m²\/L depending on dilution and porosity. No drying time-surface is neutral after the final rinse.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe acidic formula suits \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and clinker because their silica framework resists low pH attack. Sandstone and concrete tolerate a 1:5 mix when pre-wetted, as the water layer limits acid penetration. Do not use on polished marble, aluminium fixtures, or acid-sensitive limestone without a 1:10 trial spot.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine grease removal, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e. For long-term stain protection after cleaning, apply \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For ceramic or porcelain grout haze, switch to KF Cement Residue Remover.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the area ventilated; acid vapours settle on metal fittings within 10 minutes.\u003c\/li\u003e\n\u003cli\u003eNeutralise rinse water with 50 g baking soda per 10 L before disposal to protect drains.\u003c\/li\u003e\n\u003cli\u003eSeal cleaned stone within 24 hours to block resoiling and reduce water absorption by up to 90 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880111812940,"sku":"162-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880111845708,"sku":"162-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401579471180,"sku":"162-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/162.webp?v=1772467361"},{"product_id":"lithofin-care-kit-natural-stone-floors","title":"Lithofin MN Care Set for Natural Stone Floors (Compact)","description":"\u003cp\u003eYour polished marble hallway starts to dull, grout lines trap grime, and weekend mopping no longer restores the original sheen. The Lithofin MN Onderhoudsset ends that slide: one box gives you both deep-cleaning and weekly maintenance power for every natural stone floor in the house.\u003c\/p\u003e\n\u003ch2\u003eWhat Onderhoudsset Does\u003c\/h2\u003e\n\u003cp\u003eOnderhoudsset is a neutral care kit for natural stone floors. The 2-product system pairs a pH ≈ 10 alkaline cleaner that breaks down fatty soils and soap scum with a pH ≈ 8 maintenance wash that lifts day-to-day dirt without leaving surfactant films. Solvents at \u0026lt;2 % dissolve light wax, while complexing agents bind Ca²⁺ to prevent streaks. One kit services 60-120 m² when dosed at 1:200.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFirst-time restoration of a \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e kitchen floor - dilute 1:10 for the initial scrub.\u003c\/li\u003e\n\u003cli\u003eWeekly wipe of a \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e bathroom - dilute 1:200 in warm water.\u003c\/li\u003e\n\u003cli\u003ePost-renovation dust film on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e tiles - dilute 1:20, dwell 5 min.\u003c\/li\u003e\n\u003cli\u003eTraffic lanes on a \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e entrance - dilute 1:15, agitate with soft pad.\u003c\/li\u003e\n\u003cli\u003eQuick refresh of porcelain kitchen plinths - dilute 1:200, no rinse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVacuum the floor, then mix 50 ml cleaner with 1 L warm water (1:20) for deep cleaning.\u003c\/li\u003e\n\u003cli\u003eSpread solution with a microfibre mop, keep surface wet for 5 minutes.\u003c\/li\u003e\n\u003cli\u003eScrub joints using a white pad, pick up slurry with a wet vac.\u003c\/li\u003e\n\u003cli\u003eFor daily care, add 25 ml maintenance wash to 5 L water (1:200) and mop; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre covers 5-15 m² at 1:20 or up to 300 m² at 1:200. Floor is touch-dry after 30 minutes at 20 °C and ready for foot traffic immediately.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula is safe on acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e because the mildly alkaline pH will not etch CaCO₃. Low-foaming surfactants lift dirt from dense \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, while sequestrants keep pores open on porous \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e. Do not use on oiled wood or waxed cork.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain repellence after cleaning, apply \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For cement haze or heavy builders’ dirt, shift to \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse 40 °C water: surfactant activity doubles between 20 °C and 40 °C, cutting dwell time by 3 minutes.\u003c\/li\u003e\n\u003cli\u003eReplace rinse water every 30 m² to prevent redepositing fine clay particles.\u003c\/li\u003e\n\u003cli\u003eBuff dry with a white pad: friction heat raises gloss on Mohs 3-4 stones by up to 10 GU.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880111911244,"sku":"203-11-B","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/203.webp?v=1772467426"},{"product_id":"lithofin-mn-easy-clean","title":"Lithofin MN Easy-Clean","description":"\u003cp\u003eSplash marks on your marble kitchen countertop, greasy fingerprints on the quartz island, water rings on the limestone vanity-daily mess builds up fast. Lithofin MN Easy-Clean removes that film in seconds, so you wipe once and move on.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Easy-Clean Does\u003c\/h2\u003e\n\u003cp\u003eMN Easy-Clean is a neutral maintenance cleaner for natural stone, quartz, and ceramic. With a pH of 7.5 it stays within the safe zone for acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e. Mild surfactants lift fats, soap scum, and light limescale up to 0.1 mm thick; alcohol flashes off in under 60 seconds, leaving no streaks. Ready-to-use strength means 0 dilution errors and uniform cleaning power every time.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble kitchen countertop spot cleaning - 1:1 ready spray for 50 ml\/m² (\u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eGranite sink surround after food prep - 1:1 ready spray for 70 ml\/m²\u003c\/li\u003e\n\u003cli\u003eLimestone bathroom vanity to remove toothpaste splatter - 1:1 ready spray for 80 ml\/m²\u003c\/li\u003e\n\u003cli\u003eGlass-mosaic backsplash degreasing - 1:1 ready spray for 100 ml\/m² (\u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003ePorcelain coffee table rings - 1:1 ready spray for 60 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle once and hold the nozzle 15 cm from the surface.\u003c\/li\u003e\n\u003cli\u003eSpray a thin, even film-approximately 10 pumps per 1 m².\u003c\/li\u003e\n\u003cli\u003eWipe immediately with a clean microfiber cloth, folding the cloth to expose fresh sections.\u003c\/li\u003e\n\u003cli\u003eBuff dry with the second side of the cloth; no rinsing required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 50-100 ml\/m², so a 500 ml bottle treats 5-10 m². Surface is food-safe as soon as it is touch-dry-usually 1 minute at 20 °C. Reapply as often as you like; the neutral formulation will not build residue.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse confidently on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, slate, basalt, and terrazzo because the non-acidic formula will not etch or open pores. It also works on porcelain and ceramic tiles. The pH-neutral base protects acid-sensitive surfaces such as marble and limestone while removing everyday grime. Do not use Easy-Clean for large floor areas; switch to MN Wash \u0026amp; Clean for economy.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor bucket-mopping broad floors, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e (dilute 1:100). For long-term oil and wine protection, seal with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Easy-Clean stays on standby for quick countertop wipe-downs.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep two microfiber cloths: one for the initial wipe, one for the final buff; this halves streak risk.\u003c\/li\u003e\n\u003cli\u003eWarm the cloth under hot water, wring out, then wipe-heat speeds evaporation by 15 % and leaves zero shadowing.\u003c\/li\u003e\n\u003cli\u003eOn heavily used café bars, finish with a pass of MN Stain-Stop every six months; the sealer reduces next-day staining by up to 90 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880117678412,"sku":"189-11-B","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/189.webp?v=1772467414"},{"product_id":"lithofin-care-kit-natural-stone-worktops","title":"Lithofin MN Care Set for Natural Stone \u0026 Quartz Composite Countertops","description":"\u003cp\u003eYour marble kitchen island shows dull grease shadows and sticky fingerprints after every meal prep. Water alone leaves streaks, and harsh products risk etching the stone. The MN Care Kit ends the cycle with one alkaline deep cleaner and one neutral daily spray tailored to natural and composite worktops.\u003c\/p\u003e\n\n\u003ch2\u003eWhat MN Care Kit Does\u003c\/h2\u003e\n\u003cp\u003eMN Care Kit is a two-part system: MN Vuiloplosser is an alkaline cleaner (pH 11) that dissolves grease, wax, and soap scum; MN Easy-Clean is a neutral maintenance spray (pH 7.5) that lifts fresh spills and buffs to a streak-free finish. The first breaks down polymerised kitchen residues within 10 minutes; the second encapsulates light dirt with non-ionic surfactants and evaporates in 2 minutes, leaving no film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasy \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e hob surrounds - dilute MN Vuiloplosser 1:10.\u003c\/li\u003e\n  \u003cli\u003eEtch-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e breakfast bars - spray MN Easy-Clean undiluted.\u003c\/li\u003e\n  \u003cli\u003eStained \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e sinks after red-wine night - soak with Vuiloplosser 1:5.\u003c\/li\u003e\n  \u003cli\u003eDaily wipe-downs of limestone splashbacks - one trigger pull of Easy-Clean per 0.5 m².\u003c\/li\u003e\n  \u003cli\u003ePre-sealing wash before applying \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e - Vuiloplosser 1:20.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDilute MN Vuiloplosser with warm water (1:10 for routine, 1:5 for heavy soil) and spread with a white pad.\u003c\/li\u003e\n  \u003cli\u003eWork the solution for 5 minutes, keep wet, then rinse twice with clean water.\u003c\/li\u003e\n  \u003cli\u003eFor daily care, spray MN Easy-Clean directly on the cool surface and wipe with a microfibre cloth.\u003c\/li\u003e\n  \u003cli\u003eBuff dry; surface is food-safe after 2 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre of diluted Vuiloplosser covers 20 m²; a 500 ml Easy-Clean bottle treats about 40 m². No curing time required.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe kit scores excellent on \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e because the alkaline formula lifts organic grime without acid that would etch soft Mohs 3 stones, while the neutral spray leaves no salt deposits on low-porosity substrates. Do not use the alkaline component on polished aluminium appliances.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain blocking after cleaning, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For restoring worn gloss on dark granite, finish with \u003ca href=\"\/en-ie\/products\/lithofin-mn-polish\"\u003eMN Polish Liquid\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat accelerates evaporation; cool the worktop to below 25 °C before using Easy-Clean to avoid streaks.\u003c\/li\u003e\n  \u003cli\u003eUse a white melamine pad with Vuiloplosser to reach the microscopic pits of sandstone-laboratory tests show 20 % higher soil removal.\u003c\/li\u003e\n  \u003cli\u003eAfter sealing with MN Stain-Stop, switch to Easy-Clean exclusively; alkaline cleaners can shorten sealer life by 15 % if overused.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880117743948,"sku":"238-11-B","price":30.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/238.webp?v=1772467439"},{"product_id":"lithofin-mn-easy-clean-spray","title":"Lithofin MN Easy-Clean","description":"\u003cp\u003eSplash marks on your marble kitchen countertop, greasy fingerprints on the quartz island, water rings on the limestone vanity-daily mess builds up fast. Lithofin MN Easy-Clean removes that film in seconds, so you wipe once and move on.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Easy-Clean Does\u003c\/h2\u003e\n\u003cp\u003eMN Easy-Clean is a neutral maintenance cleaner for natural stone, quartz, and ceramic. With a pH of 7.5 it stays within the safe zone for acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e. Mild surfactants lift fats, soap scum, and light limescale up to 0.1 mm thick; alcohol flashes off in under 60 seconds, leaving no streaks. Ready-to-use strength means 0 dilution errors and uniform cleaning power every time.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble kitchen countertop spot cleaning - 1:1 ready spray for 50 ml\/m² (\u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eGranite sink surround after food prep - 1:1 ready spray for 70 ml\/m²\u003c\/li\u003e\n\u003cli\u003eLimestone bathroom vanity to remove toothpaste splatter - 1:1 ready spray for 80 ml\/m²\u003c\/li\u003e\n\u003cli\u003eGlass-mosaic backsplash degreasing - 1:1 ready spray for 100 ml\/m² (\u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003ePorcelain coffee table rings - 1:1 ready spray for 60 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle once and hold the nozzle 15 cm from the surface.\u003c\/li\u003e\n\u003cli\u003eSpray a thin, even film-approximately 10 pumps per 1 m².\u003c\/li\u003e\n\u003cli\u003eWipe immediately with a clean microfiber cloth, folding the cloth to expose fresh sections.\u003c\/li\u003e\n\u003cli\u003eBuff dry with the second side of the cloth; no rinsing required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 50-100 ml\/m², so a 500 ml bottle treats 5-10 m². Surface is food-safe as soon as it is touch-dry-usually 1 minute at 20 °C. Reapply as often as you like; the neutral formulation will not build residue.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse confidently on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, slate, basalt, and terrazzo because the non-acidic formula will not etch or open pores. It also works on porcelain and ceramic tiles. The pH-neutral base protects acid-sensitive surfaces such as marble and limestone while removing everyday grime. Do not use Easy-Clean for large floor areas; switch to MN Wash \u0026amp; Clean for economy.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor bucket-mopping broad floors, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e (dilute 1:100). For long-term oil and wine protection, seal with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Easy-Clean stays on standby for quick countertop wipe-downs.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep two microfiber cloths: one for the initial wipe, one for the final buff; this halves streak risk.\u003c\/li\u003e\n\u003cli\u003eWarm the cloth under hot water, wring out, then wipe-heat speeds evaporation by 15 % and leaves zero shadowing.\u003c\/li\u003e\n\u003cli\u003eOn heavily used café bars, finish with a pass of MN Stain-Stop every six months; the sealer reduces next-day staining by up to 90 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880117940556,"sku":"189-21-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"500 ml spray","offer_id":56880117973324,"sku":"189-21-B","price":18.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580552524,"sku":"189-21-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/189_c2dbee99-7341-4db6-b2c5-303ebbd95696.webp?v=1772467417"},{"product_id":"lithofin-mn-care-sheen","title":"Lithofin MN Care-Sheen","description":"\u003cp\u003eYour polished marble living-room floor looks flat, traffic lanes appear grey, and damp mopping no longer brings back the shine. Care-Sheen corrects that in one pass, leaving a micro-thin gloss film that dries in minutes and resists scuffing for up to 12 weeks.\u003c\/p\u003e\n\u003ch2\u003eWhat Care-Sheen Does\u003c\/h2\u003e\n\u003cp\u003eCare-Sheen is a neutral maintenance finish for natural stone and ceramic surfaces. The pH-8 polymer dispersion bonds to microscopic pores, forming a 0.5 µm film that raises light reflectance by 25 %. Undiluted use covers 20 m² per litre; a 1:10 dilution stretches coverage to 200 m², ideal for low-traffic granite.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e foyer losing gloss - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eBathroom porcelain tiles with water spotting - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eGranite kitchen island that sees occasional cutting - dilute 1:10, 10 ml\/m².\u003c\/li\u003e\n\u003cli\u003eNewly honed limestone hallway after first seal - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eRough commercial granite lobby needing quick shine - dilute 1:10, 10 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake bottle for 30 s, then pour required quantity into a clean bucket.\u003c\/li\u003e\n\u003cli\u003eDip a lint-free mop or soft cloth, wring lightly, and spread in a thin, even film.\u003c\/li\u003e\n\u003cli\u003eDo not rework drying sections; allow surface to air-dry for 30 min.\u003c\/li\u003e\n\u003cli\u003eOptional: buff with a white pad after 60 min to heighten gloss by a further 10 %.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eUndiluted coverage: 20 m²\/L. Diluted 1:10 coverage: 200 m²\/L. No rinsing. Floor is walkable once dry; full film hardens after 2 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eCare-Sheen performs best on polished \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, and glazed \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e because its neutral pH does not attack acid-sensitive calcite while the polymer anchors well in low-porosity substrates. It also suits limestone, bluestone, basalt, glass-mosaic, quartz-composite, and terrazzo. Do not use on outdoor slabs or any surface that must remain water-vapour open.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term stain protection, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e before Care-Sheen. For day-to-day cleaning between gloss refreshes, mop with \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e at 20 ml per 10 L water.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways clean with a pH-neutral detergent like Wash \u0026amp; Clean first; dirt trapped under the film dulls reflectance by up to 40 %.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats instead of one heavy coat on porous limestone; this prevents streaks and improves wear resistance by 30 %.\u003c\/li\u003e\n\u003cli\u003eBuffing with a high-speed machine (1500 rpm) after drying compresses the film, making it more scratch-resistant on Mohs-7 granite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118071628,"sku":"172-11-B","price":19.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118104396,"sku":"172-11-B","price":62.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580618060,"sku":"172-11-B-DOOS-10","price":172.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/172.webp?v=1772467387"},{"product_id":"lithofin-mn-care-bluestone","title":"Lithofin MN Care for Bluestone","description":"\u003cp\u003eYour newly laid bluestone hallway quickly dulls under daily shoes and grit. Mop water leaves streaks, and colour depth fades week by week. MN Blauwe Hardsteen Onderhoud ends that cycle with a single 20 ml dose in a bucket.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Blauwe Hardsteen Onderhoud Does\u003c\/h2\u003e\n\u003cp\u003eMN Blauwe Hardsteen Onderhoud is a neutral maintenance cleaner for \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e and other natural stone. At pH 8 it suspends greasy films with non-ionic surfactants while replenishing the stone’s micro-pores with care additives that boost colour by up to 15 % reflectance. The 1:500 solution leaves no alkaline residue, so acid-sensitive limestone stays unharmed.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFreshly installed bluestone floors in kitchens - dilute 20 ml\/10 L for daily maintenance (\u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eMatting entryways on \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e - 40 ml\/10 L for fortnightly refresh\u003c\/li\u003e\n\u003cli\u003eLight grease on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops - 10 ml\/5 L wipe-down\u003c\/li\u003e\n\u003cli\u003eSoap film on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e shower walls - 25 ml\/10 L spray application\u003c\/li\u003e\n\u003cli\u003eDusty \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e patio after rain - 30 ml\/10 L mop rinse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFill a clean bucket with 10 L warm water and add exactly 20 ml (≈ 2 caps) of product.\u003c\/li\u003e\n\u003cli\u003eImmerse a flat microfibre mop, wring to damp, and distribute evenly over 15 - 20 m².\u003c\/li\u003e\n\u003cli\u003eAllow a 3-minute contact time; do not let the surface dry during this phase on heavily soiled zones.\u003c\/li\u003e\n\u003cli\u003eNo rinsing is required; let the floor air-dry to a streak-free finish within 15 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage coverage equals 2 ml\/m²; one 1 L bottle treats about 500 m². Re-apply whenever the surface loses its silk sheen.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on bluestone, basalt, and low-porosity \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e because its pH 8 blend will not etch calcite. It remains safe on medium-porosity marble, sandstone, and quartz-composite as the surfactants rinse residue-free. High-porosity cotto and terracotta accept the product but may need a second pass to avoid absorbed water. Do not use on oiled wood or unsealed metal.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stubborn wax or construction grime, switch to MN Power-Clean at 1:5 dilution (\u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral-cleaning\u003c\/a\u003e). For ongoing neutral care on mixed stone and tile surfaces, MN Wash \u0026amp; Clean offers a broader fragrance but less colour enhancement.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd warm (40 °C) water; higher temperature cuts fatty deposits 20 % faster.\u003c\/li\u003e\n\u003cli\u003eUse two-bucket mopping on porous \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e to prevent redepositing soil.\u003c\/li\u003e\n\u003cli\u003eBuff dry with a white pad on polished marble to raise gloss by an extra 5 GU (gloss units).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118235468,"sku":"389-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118268236,"sku":"389-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582092620,"sku":"389-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/389-1l.webp?v=1781186703"},{"product_id":"lithofin-mn-wash-and-clean","title":"Lithofin MN Wash \u0026 Clean","description":"\u003cp\u003eYour polished marble foyer shows every footprint and drop of mop water. Daily traffic dulls the gloss, yet harsh cleaners risk etching. Lithofin MN Wash \u0026amp; Clean ends the trade-off: one capful in the bucket, streak-free stone in minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat Wash \u0026amp; Clean Does\u003c\/h2\u003e\n\u003cp\u003eWash \u0026amp; Clean is a pH-neutral maintenance cleaner for all natural stone. Non-ionic surfactants lift grease, soap, and street dirt without breaking down calcium-no risk for Mohs-3 marble. The 1:250 concentrate leaves an invisible care component that enhances colour and slows re-soiling for up to 48 hours.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e entrance halls - dilute 2 capfuls\/5 L for 150 m² coverage.\u003c\/li\u003e\n\u003cli\u003eRough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen floors - 2 capfuls\/5 L remove grease films, 100 m²\/L.\u003c\/li\u003e\n\u003cli\u003eLimestone vanity tops in bathrooms - 1 capful\/5 L for light soap residue, 200 m²\/L.\u003c\/li\u003e\n\u003cli\u003eQuartz-composite worktops - wipe with 1 capful\/5 L, no rinse, excellent gloss retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003eDaily-maintenance\u003c\/a\u003e on mixed stone areas - 1-2 capfuls\/5 L keeps grout joints bright.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFill a clean bucket with 5 L warm water and add 1-2 capfuls (20-40 ml) concentrate.\u003c\/li\u003e\n\u003cli\u003eSoak a microfiber mop, wring until damp-not dripping.\u003c\/li\u003e\n\u003cli\u003eWork in 10 m² sections, rinsing the mop regularly in the same solution.\u003c\/li\u003e\n\u003cli\u003eAllow the surface to air-dry; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 100-200 m² per litre of concentrate, equal to 50-100 buckets. Floor is walkable as soon as it is dry-usually under 10 minutes at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral pH 7 formula will not etch acid-sensitive stones such as \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, or \u003ca href=\"\/en-ie\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e. Low-foam surfactants rinse off fully, so pores in high-porosity \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e stay open. Safe on hard stones like basalt and slate, and acceptable on porcelain or ceramic, though KF Conditioning Cleaner is optimised for those. No restricted surfaces.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor intensive restoration of oily or waxy build-up, switch to \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e at 1:5. For long-term stain resistance, seal with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e after deep cleaning. Use Wash \u0026amp; Clean afterwards to preserve both finishes.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChange the solution after 75 m²; dirty water redeposits soil and dulls gloss.\u003c\/li\u003e\n\u003cli\u003eUse a two-bucket method on honed limestone to avoid grey streaks-one for washing, one for wringing.\u003c\/li\u003e\n\u003cli\u003eAdd 40 °C water in winter; higher temperature reduces surface tension by 15 % and lifts road salt faster.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118333772,"sku":"173-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118366540,"sku":"173-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582125388,"sku":"173-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/173.webp?v=1772467389"},{"product_id":"lithofin-mn-easy-clean-kitchen-care-set","title":"Lithofin MN Easy-Clean Kitchen Care Set","description":"\u003cp\u003eYour marble island shows greasy fingerprints after every meal prep, the granite splashback catches tomato sauce, and the limestone windowsill collects dust. The MN Easy Clean Kitchen Care Set solves all three messes in one spray-and-wipe pass.\u003c\/p\u003e\n\u003ch2\u003eWhat Easy Clean Does\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Clean\u003c\/strong\u003e is a neutral daily cleaner for natural stone and engineered kitchen surfaces. The pH 7.0 formula dissolves fresh grease with non-ionic surfactants at 1 g\/L, lifts sugar and protein residues in 30 seconds, and evaporates without streaks. No acids or alkalis means zero etching on Mohs-3 marble while still breaking down cooking oil at 20 mg\/cm².\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble counters after food prep - use undiluted, one trigger pull per 0.1 m². \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003eMarble care page\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGranite splashbacks with dried sauce - spray undiluted, dwell 30 s, wipe. \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003eGranite details\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuartz-composite breakfast bar for daily-maintenance - two sprays per 0.2 m². \u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003eDaily maintenance tips\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePorcelain hobs before sealing with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e - clean undiluted.\u003c\/li\u003e\n\u003cli\u003eCotto windowsills collecting dust - light mist, wipe dry. \u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003eCotto info\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle, hold nozzle 20 cm from the surface, and spray a fine mist. Dilution: none.\u003c\/li\u003e\n\u003cli\u003eSpread evenly with a microfiber cloth folded into quarters; work 1 m² at a time.\u003c\/li\u003e\n\u003cli\u003eWait 30 seconds for the surfactants to loosen grime.\u003c\/li\u003e\n\u003cli\u003eFlip cloth to a dry side and buff until the surface is touch-dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage consumption: 50 m² per litre (≈500 trigger pulls). No drying time-surface is food-safe immediately after wiping.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eOn acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, the neutral pH prevents etch marks; on low-porosity \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, the micro-emulsion lifts films without leaving a residue. Excellent results on sandstone, slate, porcelain, and glass-mosaic. Do not use on unsealed wood or lacquered furniture.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term stain protection, follow with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For weekly mop cleaning of larger tiled areas, switch to \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFold the microfiber cloth into eight clean faces; one face covers about 0.5 m² before saturation.\u003c\/li\u003e\n\u003cli\u003eWarm water (30 °C) on the cloth accelerates grease breakup by 15 % when tackling heavy splatters.\u003c\/li\u003e\n\u003cli\u003eBuff granite after wiping to raise gloss by up to 5 GU (gloss units) measured at 60°.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118464844,"sku":"235-11-B","price":33.95,"currency_code":"EUR","in_stock":false}]},{"product_id":"lithofin-care-kit-natural-stone-kitchen","title":"Lithofin MN Care Set for Natural Stone Kitchen (Re-sealing)","description":"\u003cp\u003eYour polished kitchen island has lost its original sheen, the splash zone behind the sink shows water spots, and the bathroom vanity picks up fingerprints every day. The Care Kit LE brings three MN products together to clean, protect, and refresh all in one box.\u003c\/p\u003e\n\u003ch2\u003eWhat Care Kit LE Does\u003c\/h2\u003e\n\u003cp\u003eCare Kit LE is a neutral maintenance kit for natural stone. MN Easy-Clean (pH 7) removes daily grime and limescale with mild surfactants that leave no streaks. MN Power-Clean (pH 10) cuts through oily films and wax residues by breaking long-chain fatty acids within 10 minutes. MN Stain-Stop (pH 6) impregnates the pore structure and lowers water absorption by 90 % while allowing 98 % vapor diffusion.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDaily wipe-down of a \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e vanity - 1:20 dilution MN Easy-Clean.\u003c\/li\u003e\n\u003cli\u003eWeekly mop of a \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen floor - 1:40 dilution MN Easy-Clean.\u003c\/li\u003e\n\u003cli\u003eSpring deep clean of a \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e patio - 1:4 dilution MN Power-Clean.\u003c\/li\u003e\n\u003cli\u003eAnnual sealing of a \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e shower wall - undiluted MN Stain-Stop.\u003c\/li\u003e\n\u003cli\u003eSpot protection on a \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e hearth after repairs - undiluted MN Stain-Stop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSpray MN Easy-Clean, wipe with a microfibre cloth, allow to flash-off for PT2M.\u003c\/li\u003e\n\u003cli\u003eFor heavy build-up, spread MN Power-Clean 1:4 with a white pad, agitate for PT10M, rinse twice.\u003c\/li\u003e\n\u003cli\u003eLet the surface dry to \u0026lt;3 % moisture (approx. PT2H), then spread MN Stain-Stop evenly with a lambswool applicator.\u003c\/li\u003e\n\u003cli\u003eAfter PT15M, buff off surplus with an absorbent towel to avoid gloss variations.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTypical coverage: Easy-Clean 30-40 m²\/L, Power-Clean 12 m²\/L, Stain-Stop 10-20 m²\/L. Full curing of the impregnator takes 24 h; keep the area dry during this time.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe kit excels on porous stones such as \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because the neutral pH cleaners will not etch acid-sensitive calcite while the solvent carrier in Stain-Stop penetrates micro-capillaries without closing them. Do not use Power-Clean on polished aluminium fittings.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stripping old acrylic coatings, use Lithofin WAX-OFF. For cement-film removal after grouting, choose Lithofin MN Builder’s Clean; Care Kit LE handles ongoing maintenance and stain protection.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDamp-wipe with Easy-Clean before sealing; a residue-free surface increases Stain-Stop uptake by up to 15 %.\u003c\/li\u003e\n\u003cli\u003eWarm the stone to 20 °C before impregnation; higher temperature lowers viscosity and boosts penetration depth.\u003c\/li\u003e\n\u003cli\u003eBuff Stain-Stop twice at 5-minute intervals; the second pass eliminates any shadowing on high-polish marble.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118497612,"sku":"227-75-B","price":63.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/227.webp?v=1772467436"},{"product_id":"lithofin-care-kit-composiet","title":"Lithofin MN Care Set for Natural Stone \u0026 Quartz Composite Countertops","description":"\u003cp\u003eYour marble kitchen island shows dull grease shadows and sticky fingerprints after every meal prep. Water alone leaves streaks, and harsh products risk etching the stone. The MN Care Kit ends the cycle with one alkaline deep cleaner and one neutral daily spray tailored to natural and composite worktops.\u003c\/p\u003e\n\n\u003ch2\u003eWhat MN Care Kit Does\u003c\/h2\u003e\n\u003cp\u003eMN Care Kit is a two-part system: MN Vuiloplosser is an alkaline cleaner (pH 11) that dissolves grease, wax, and soap scum; MN Easy-Clean is a neutral maintenance spray (pH 7.5) that lifts fresh spills and buffs to a streak-free finish. The first breaks down polymerised kitchen residues within 10 minutes; the second encapsulates light dirt with non-ionic surfactants and evaporates in 2 minutes, leaving no film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasy \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e hob surrounds - dilute MN Vuiloplosser 1:10.\u003c\/li\u003e\n  \u003cli\u003eEtch-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e breakfast bars - spray MN Easy-Clean undiluted.\u003c\/li\u003e\n  \u003cli\u003eStained \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e sinks after red-wine night - soak with Vuiloplosser 1:5.\u003c\/li\u003e\n  \u003cli\u003eDaily wipe-downs of limestone splashbacks - one trigger pull of Easy-Clean per 0.5 m².\u003c\/li\u003e\n  \u003cli\u003ePre-sealing wash before applying \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e - Vuiloplosser 1:20.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDilute MN Vuiloplosser with warm water (1:10 for routine, 1:5 for heavy soil) and spread with a white pad.\u003c\/li\u003e\n  \u003cli\u003eWork the solution for 5 minutes, keep wet, then rinse twice with clean water.\u003c\/li\u003e\n  \u003cli\u003eFor daily care, spray MN Easy-Clean directly on the cool surface and wipe with a microfibre cloth.\u003c\/li\u003e\n  \u003cli\u003eBuff dry; surface is food-safe after 2 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre of diluted Vuiloplosser covers 20 m²; a 500 ml Easy-Clean bottle treats about 40 m². No curing time required.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe kit scores excellent on \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e because the alkaline formula lifts organic grime without acid that would etch soft Mohs 3 stones, while the neutral spray leaves no salt deposits on low-porosity substrates. Do not use the alkaline component on polished aluminium appliances.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain blocking after cleaning, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For restoring worn gloss on dark granite, finish with \u003ca href=\"\/en-ie\/products\/lithofin-mn-polish\"\u003eMN Polish Liquid\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat accelerates evaporation; cool the worktop to below 25 °C before using Easy-Clean to avoid streaks.\u003c\/li\u003e\n  \u003cli\u003eUse a white melamine pad with Vuiloplosser to reach the microscopic pits of sandstone-laboratory tests show 20 % higher soil removal.\u003c\/li\u003e\n  \u003cli\u003eAfter sealing with MN Stain-Stop, switch to Easy-Clean exclusively; alkaline cleaners can shorten sealer life by 15 % if overused.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118595916,"sku":"238-75-B","price":71.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/238_ca6bf799-daa7-4a33-b9bb-05b45a32b134.webp?v=1772467442"},{"product_id":"lithofin-mn-colour-intensifier","title":"MN Colour Intensifier for rough, absorbent natural and artificial Stone","description":"\u003cp\u003eYour freshly laid slate kitchen floor looked rich and vibrant at first, but a few weeks of traffic have left the surface looking pale and dusty. One thin coat of MN Colour Intensifier restores the deep charcoal tone while guarding against stains for up to five years.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Colour Intensifier Does\u003c\/h2\u003e\n\u003cp\u003eMN Colour Intensifier is a neutral solvent-based impregnator for rough, absorbent natural stone. Resins penetrate 2-4 mm, bind to pore walls, and raise light absorption, so colours read 20-40 % darker. The carrier flashes off in 30 minutes, leaving a breathable layer that repels water and oil to 0.5 µL contact angle.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHoned granite countertops - ready to use, 50 ml\/m²\u003c\/li\u003e\n\u003cli\u003eTumbled travertine bathroom walls - ready to use, 40 ml\/m²\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003eSandstone\u003c\/a\u003e patio slabs before sealing - ready to use, 80 ml\/m²\u003c\/li\u003e\n\u003cli\u003eInterior \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e floors after deep cleaning - ready to use, 60 ml\/m²\u003c\/li\u003e\n\u003cli\u003eFaded bluestone hearths - ready to use, 55 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the surface with \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e; rinse and let dry 24 h.\u003c\/li\u003e\n\u003cli\u003ePour MN Colour Intensifier into a paint tray; do not dilute.\u003c\/li\u003e\n\u003cli\u003eUsing a lint-free cloth, wipe a thin, even film, about 50 ml\/m², keeping a wet edge. Time: 5 min per m².\u003c\/li\u003e\n\u003cli\u003eAfter 15 min, buff off surplus with a white pad to prevent gloss patches.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 10-30 m²\/L depending on porosity. Full colour develops after 24 h; avoid moisture during this period.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e because it fills medium-to-high porosity without forming a surface film, so the stone keeps its matte texture. The neutral pH means no etching on acid-sensitive marble or limestone. Do not use on polished marble, already colour-treated stone, or where a pale, natural look is required.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing after treatment, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For removing construction dirt before intensifying, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork in 5 m² sections; this keeps wet-edge time under 5 minutes and prevents lap marks.\u003c\/li\u003e\n\u003cli\u003eWarm stone (18-25 °C) absorbs 15 % more product than cold stone, giving a stronger colour pop.\u003c\/li\u003e\n\u003cli\u003eReapply after high-pressure washing outdoors; UV and water accelerate fade to 50 % after 4 years.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118661452,"sku":"167-11-B","price":29.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118694220,"sku":"167-11-B","price":94.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582190924,"sku":"167-11-B-DOOS-10","price":261.18,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/167.webp?v=1772467374"},{"product_id":"lithofin-kf-intensive-cleaner","title":"Lithofin KF Intensive Cleaner","description":"\u003cp\u003eYour kitchen porcelain floor shows greasy traffic lanes, and the grout in your shower traps soap scum that regular detergent cannot shift. KF Intensive Cleaner (article 180) breaks down this build-up within minutes, restoring the tile’s original slip resistance and colour.\u003c\/p\u003e\n\u003ch2\u003eWhat KF Intensive Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eKF Intensive Cleaner is an alkaline cleaner for ceramic, porcelain, cotto, and clinker. With a pH of 11.3, strong surfactants cut polymer wax, grease, and micro-grime that lodge in pores smaller than 0.2 µm. At 1:5 dilution it removes stubborn fat films; at 1:20 it lifts everyday residue without harming grout lines.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnglazed \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain kitchen floor\u003c\/a\u003e: 1:10 for quarterly deep clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003eCotto foyer\u003c\/a\u003e with old wax: 1:5 or undiluted strip, then rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eClinker basement\u003c\/a\u003e with oil spots: 1:5 scrub via machine.\u003c\/li\u003e\n\u003cli\u003eBathroom tiles showing cloudy film (\u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning issue\u003c\/a\u003e): 1:20 mop and rinse.\u003c\/li\u003e\n\u003cli\u003eTerracotta patio with water-based sealer residue (\u003ca href=\"\/en-ie\/pages\/problem-wax-residue\"\u003ewax residue\u003c\/a\u003e): 1:5 brush application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare solution: pour water first, then add the cleaner to reach 1:5-1:20, or use neat on heavy wax.\u003c\/li\u003e\n\u003cli\u003eDistribute with a mop, sponge, or scrubbing machine, keeping surface wet for 5-10 min.\u003c\/li\u003e\n\u003cli\u003eAgitate with white pad or scrubber until the slurry darkens.\u003c\/li\u003e\n\u003cli\u003eVacuum or mop up, rinse twice with clear water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-20 m²\/L depending on dilution. No drying time; floor is walkable after final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe alkaline formula will not etch acid-sensitive stones, yet it excels on dense tiles. Excellent results on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Good on marble, limestone, and other calcareous stones because the pH stays below 12, but \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e users often prefer MN Power-Clean. Do not use on rare surfaces expressly labelled “alkali-sensitive”.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor daily wipe care use \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For long-term stain protection after deep cleaning, apply \u003ca href=\"\/en-ie\/products\/lithofin-kf-protective-impregnator\"\u003eKF Protective Impregnator\u003c\/a\u003e. Choose MN Power-Clean for acid-sensitive natural stone that needs stronger chelation.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm (35 °C) solution speeds soil release by 20 %-ideal in winter.\u003c\/li\u003e\n\u003cli\u003ePre-wet very porous cotto so the cleaner stays on the surface and works evenly.\u003c\/li\u003e\n\u003cli\u003eAlways rinse twice; leaving alkaline residue can attract dirt 30 % faster.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880119021900,"sku":"180-11-B","price":18.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880119054668,"sku":"180-11-B","price":64.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582354764,"sku":"180-11-B-DOOS-10","price":168.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/180.webp?v=1772467395"},{"product_id":"lithofin-kf-ceramic-clean","title":"Lithofin KF Ceramic-Clean","description":"\u003cp\u003eSoap scum clouds your shower wall, and hard-water spots creep across the ceramic floor. Five minutes later, Ceramic-Clean strips the limescale and leaves the tile streak-free.\u003c\/p\u003e\n\u003ch2\u003eWhat Ceramic-Clean Does\u003c\/h2\u003e\n\u003cp\u003eCeramic-Clean is an acidic cleaner for ceramic and porcelain surfaces. Its pH 2.0 solution converts calcium carbonate into water-soluble salts, liberating deposits in 5-10 minutes. Surfactants cut through soap and body oil so you rinse everything away at once.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShower walls in a \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e bathroom - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003ePorcelain floor around a swimming pool - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eGlass mosaic backsplash with stubborn \u003ca href=\"\/en-ie\/pages\/problem-limescale\"\u003elimescale\u003c\/a\u003e - use undiluted.\u003c\/li\u003e\n\u003cli\u003eGranite vanity top free of etching risk - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eBasalt patio after winter salt spray - dilute 1:5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMix 1 part Ceramic-Clean with 5-10 parts water in a spray bottle. Use neat for white crusts.\u003c\/li\u003e\n\u003cli\u003eWet the surface, then spread with a sponge or cloth; rate 30 ml\/m².\u003c\/li\u003e\n\u003cli\u003eWait 5-10 minutes; scrub lightly with a white pad.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water; wipe dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage reaches 10-30 m²\/L on tiles and 15-25 m²\/L on glass. No curing time; you can walk on the floor immediately.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e because their acid-resistant structure (Mohs ≥5) prevents etching. It also works on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Do not use on marble, limestone, travertine, or bluestone.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor everyday wipe-down, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For black spots in joints, pick KF Mildew-Away. Ceramic-Clean tackles mineral buildup that those neutral products cannot dissolve.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeat speeds reaction: apply after running the shower so the tile sits at 30 °C.\u003c\/li\u003e\n\u003cli\u003eSqueegee daily; you cut limescale load by 80 % and need Ceramic-Clean only monthly.\u003c\/li\u003e\n\u003cli\u003eUse a soft brush on grout; the acid loosens residue without weakening cement joints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119152972,"sku":"111-11-B","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/111.webp?v=1772467324"},{"product_id":"lithofin-kf-cement-residue-remover","title":"Lithofin KF Cement Residue Remover","description":"\u003cp\u003eYour newly laid porcelain floor looks dull because a grey film clings to each tile joint. Ordinary detergents bounce off the hardened grout. Lithofin KF Cement Residue Remover strips away that cement haze in minutes, leaving the showroom finish you expected.\u003c\/p\u003e\n\n\u003ch2\u003eWhat KF Remover Does\u003c\/h2\u003e\n\u003cp\u003eKF Remover is an \u003cstrong\u003eacidic cleaner for ceramic and porcelain tiles\u003c\/strong\u003e. At pH 1.5 it dissolves Portland-cement binders and calcium carbonate, breaking the crystalline bond that causes haze. Sulfamic acid at 120 g\/L converts insoluble cement particles into water-soluble salts that rinse away without scrubbing.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePost-grouting haze on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain kitchen floors\u003c\/a\u003e - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eStubborn cement residue on \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic bathroom walls\u003c\/a\u003e - dilute 1:3.\u003c\/li\u003e\n\u003cli\u003eLimescale rings on shower trays - apply neat on a sponge.\u003c\/li\u003e\n\u003cli\u003eBuilders’ dust film on \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete balcony slabs\u003c\/a\u003e - use undiluted after pre-wetting.\u003c\/li\u003e\n\u003cli\u003ePre-sealing clean of terracotta before \u003ca href=\"\/en-ie\/products\/lithofin-kf-protective-impregnator\"\u003eKF Protective Impregnator\u003c\/a\u003e - dilute 1:5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet the surface until uniformly damp, avoiding puddles.\u003c\/li\u003e\n\u003cli\u003eSpread the 1:3-1:5 solution with a mop or white pad; use a brush for joints. Time: 5 min.\u003c\/li\u003e\n\u003cli\u003eAgitate once more; do not let the solution dry. Time: 3 min.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, then neutralise with \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e at 1:200. Time: 2 min.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 5-15 m² \/L depending on dilution. No drying time; the floor is ready for foot traffic after final rinse.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and clinker because their Mohs ≥5, acid-resistant matrices tolerate pH 1.5 without etching. It performs well on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, concrete, terracotta, cotto and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e when the surface is pre-wet to limit penetration. Do not use on marble, limestone, travertine, bluestone or metal fittings.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine maintenance of glazed tiles, use KF Conditioning Cleaner. For sealing absorbent cotto after the initial clean, use KF Protective Impregnator. For cement haze on natural stone, switch to MN Builders’ Clean.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork in 5 m² zones to keep the acid active and easy to rinse.\u003c\/li\u003e\n\u003cli\u003eAlways neutralise with a mild alkaline wash to stop latent acid from dulling grout joints.\u003c\/li\u003e\n\u003cli\u003eWarm water (25 °C) accelerates chemical reaction by approx. 30 %, reducing dwell time.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880119218508,"sku":"110-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880119251276,"sku":"110-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582420300,"sku":"110-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/110.webp?v=1772467321"},{"product_id":"lithofin-kf-cleartop","title":"Lithofin KF ClearTop","description":"\u003cp\u003eSoap film dulls your shower tiles, kettle-hot limescale spots your kitchen splashback, and everyday cleaners bounce off the buildup. KF ClearTop cuts through the mineral crust in minutes, restoring the crisp sheen on your ceramic wall and floor tiles.\u003c\/p\u003e\n\u003ch2\u003eWhat ClearTop Does\u003c\/h2\u003e\n\u003cp\u003eClearTop is an acidic cleaner for ceramic, porcelain, and other acid-resistant surfaces. With a working pH of 1.8 it attacks calcium carbonate deposits, rust, and soap scum, converting them into water-soluble salts that rinse away. A 40 m²\/L coverage and three dilution options (1:10, 1:5, or neat) let you match strength to soil level while keeping material consumption measured in exact 25 ml\/m².\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBathroom ceramic tiles with limescale - dilute 1:10, see \u003ca href=\"\/en-ie\/pages\/problem-limescale\"\u003elimescale guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePorcelain kitchen splashbacks after months of cooking steam - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eUnglazed \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e hallway floors before sealing - use undiluted.\u003c\/li\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops stained by hard-water rings - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eAnnual \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003edeep cleaning\u003c\/a\u003e of pool-side glass-mosaic - use 1:5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare the mix: 1:10 for light film, 1:5 for stubborn scale, undiluted for cement haze. \u003ctime\u003ePT1M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpread with a mop, sponge, or microfiber cloth, making sure 50 ml\/m² wets vertical joints. \u003ctime\u003ePT2M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllow the product to fizz for 3-5 minutes; keep the surface wet, scrub with a white pad if needed. \u003ctime\u003ePT5M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water until pH-neutral runoff, then wipe dry. \u003ctime\u003ePT5M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre treats up to 40 m². No drying time is required; surfaces are traffic-ready immediately after the final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eClearTop excels on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, ceramic, and \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e because their Mohs ≥6 hardness and acid resistance prevent etching while the low porosity lets the solution lift deposits quickly. It is also effective on basalt, slate, granite, and other acid-resistant stones, though always perform a patch test. Do not use on marble, limestone, terrazzo, or any surface labelled acid-sensitive.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine streak-free maintenance after deep cleaning, use Lithofin KF Care. For long-term stain protection of countertops or shower walls, finish with Lithofin KF Stain-Stop. ClearTop stays your pick whenever you see whitish scale or rust marks.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 25 °C with shower water first; reaction speed doubles compared to 18 °C.\u003c\/li\u003e\n\u003cli\u003eWork in 3 m² sections so the acid stays active and never dries out, preventing salt residue.\u003c\/li\u003e\n\u003cli\u003eNeutralise runoff that reaches concrete grout joints with a quick pass of diluted KF Care (pH 9) for balanced surface chemistry.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119480652,"sku":"092-03-B","price":14.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/092.webp?v=1772467311"},{"product_id":"lithofin-care-kit-ceramic-tiles","title":"Lithofin KF Care Set for Ceramic Tiles","description":"\u003cp\u003eYour kitchen porcelain tiles show greasy traffic lanes while the bathroom grout carries soap build-up. The KF Maintenance Set removes both daily film and stubborn grime in one kit, restoring slip-resistant texture without dulling the glaze.\u003c\/p\u003e\n\u003ch2\u003eWhat Maintenance Set Does\u003c\/h2\u003e\n\u003cp\u003eMaintenance Set is an alkaline care-kit for ceramic and porcelain. The cleaner component works at pH 10.5, breaking the fatty acid chains that bind grease and polymer residues, while the microfiber pad lifts particles down to 5 µm. A 1:5 solution dissolves weeks of oil in 10 minutes; undiluted it attacks lime soap within 3 minutes.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKitchen porcelain floor with greasy spots - dilute 1:5, see \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaily wipe of glazed ceramic splashback - dilute 1:10\u003c\/li\u003e\n\u003cli\u003eShower wall suffering soap scum - use undiluted, rinse after 5 min\u003c\/li\u003e\n\u003cli\u003eHallway \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e tiles after muddy weather - dilute 1:5\u003c\/li\u003e\n\u003cli\u003ePeriodic deep scrub on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e grout joints - undiluted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVacuum loose grit, then mix cleaner: 100 ml in 1 L water (1:10) for maintenance or 200 ml in 1 L (1:5) for mid-soil.\u003c\/li\u003e\n\u003cli\u003eSpread with a microfiber mop, keep surface wet 5 minutes.\u003c\/li\u003e\n\u003cli\u003eAgitate with the supplied pad; on heavy soil pour undiluted product and scrub immediately.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, then dry with a lint-free cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eConsumption averages 10 ml\/m²; one litre treats about 100 m² in maintenance mode. No drying time-floor is traffic-ready after final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula is safe on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and low-porosity stones such as \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e or \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e because the alkaline cleaner contains no free caustic soda, so it will not etch acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e during short contact. Do not use on waxed wood or other surfaces incompatible with alkaline products.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor grout haze removal or mineral deposits, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-intensive-cleaner\"\u003eKF Intensive Cleaner\u003c\/a\u003e. For streak-free no-rinse daily mopping on polished tiles, switch to KF Maintenance Cleaner.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm water (40 °C) increases cleaning power by 25 %-handy on oily kitchen floors.\u003c\/li\u003e\n\u003cli\u003eUse a white pad on \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e to avoid scratches.\u003c\/li\u003e\n\u003cli\u003eAlways rinse twice; residual alkalinity can attract new dirt 30 % faster.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119578956,"sku":"217-11-B","price":27.95,"currency_code":"EUR","in_stock":false}]},{"product_id":"lithofin-kf-protective-impregnator","title":"Lithofin KF Protective Impregnator","description":"\u003cp\u003eYour brand-new unglazed kitchen floor shows greasy footprints within days. Bathroom porcelain darkens around the vanity after every shampoo spill. One liberal coat of Lithofin KF Protective Impregnator stops these stains before they start.\u003c\/p\u003e\n\u003ch2\u003eWhat Protective Impregnator Does\u003c\/h2\u003e\n\u003cp\u003eProtective Impregnator is a neutral solvent-based impregnator for porous ceramic and porcelain tiles. Silane molecules (pH≈7) bond inside pores ≤0.1 µm, forming a water-contact angle of ≥110° and an oil-repellency rating of 5. Coverage reaches 10-30 m²\/L, giving 3-5 years of invisible barrier against red wine, coffee and bathroom cosmetics.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnglazed porcelain kitchen floor after grout haze removal - Ready to use (RTU) 50 ml\/m² \u003ca href=\"\/en-ie\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-traffic ceramic lobby tiles - RTU 60 ml\/m² \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolished marble vanity splash zone - RTU 90 ml\/m² \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e alt finish\u003c\/li\u003e\n\u003cli\u003eClinker mudroom floor before winter - RTU 70 ml\/m² \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure surface is clean, fully dry (24 h) and 10-25 °C.\u003c\/li\u003e\n\u003cli\u003ePour RTU product into paint tray, saturate microfiber roller, then spread 50-100 ml\/m² evenly.\u003c\/li\u003e\n\u003cli\u003eAfter 10 minutes, redistribute pools with a soft sponge to avoid gloss spots.\u003c\/li\u003e\n\u003cli\u003eAfter 30 minutes, buff residue with a white pad; allow 24 h before wet use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage coverage: 15 m²\/L on porcelain, 12 m²\/L on cotto. Full curing: 24 h; light traffic after 2 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e (Mohs 7, low porosity) and \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e (Mohs 5). Good on \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. The neutral formula will not etch acid-sensitive terrazzo, yet still sinks deep into high-porosity concrete. Do not use on glazed tiles or any surface that will receive wax later.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing of protected floors, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For a pre-treatment that strips construction dirt before impregnation, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-intensive-cleaner\"\u003eKF Intensive Cleaner\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTest absorbency: a 5 cm water droplet should darken the tile within 30 s; if it beads, impregnation is unnecessary.\u003c\/li\u003e\n\u003cli\u003eWarm the room to ≥18 °C to speed solvent evaporation and maximise 24 h cure time.\u003c\/li\u003e\n\u003cli\u003eTwo thin coats give better stain block on very porous cotto than one heavy coat because capillary spaces fill evenly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119677260,"sku":"183-11-B","price":49.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/183.webp?v=1772467401"},{"product_id":"lithofin-kf-grout-protector","title":"Lithofin KF Grout Protector","description":"\u003cp\u003eYour shower grout absorbs shampoo, soap, and coloured water every day; in six months it looks darker than the tiles. Grout Protector stops this by sealing each joint with a water- and oil-repellent barrier that lasts up to two years.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Grout Protector Does\u003c\/h2\u003e\n\u003cp\u003eGrout Protector is a neutral impregnator for cement-based grout on ceramic, porcelain and natural-stone installations. The ready-to-use fluoropolymer solution (pH 7.8) penetrates to a depth of 1-2 mm, lines each pore, and reduces water absorption by 95 % within 24 h. Spills bead on the surface, giving you a 10-minute window to wipe away coffee, shampoo, or cooking oil before they stain.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew bathroom grout, 100 % ready to use, after 7-day cure.\u003c\/li\u003e\n\u003cli\u003eKitchen backsplash joints, 100 %, one coat for 3 mm lines.\u003c\/li\u003e\n\u003cli\u003eShower floor mosaic (\u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e), 100 %, two coats for heavy splash zones.\u003c\/li\u003e\n\u003cli\u003eOutdoor porcelain patio grout, 100 %, apply on a dry, 10 °C-25 °C day.\u003c\/li\u003e\n\u003cli\u003eLimestone floor joints after \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-cleaner\"\u003eKF Grout Cleaner\u003c\/a\u003e, 100 %.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean joints with KF Grout Cleaner, rinse, then air-dry 24 h till the grout shows \u0026lt;2 % residual moisture.\u003c\/li\u003e\n\u003cli\u003eShake bottle, fill a fine brush or applicator pen, and draw a continuous bead along each joint.\u003c\/li\u003e\n\u003cli\u003eAfter 5 minutes, remove surplus from tile edges with a damp microfibre cloth.\u003c\/li\u003e\n\u003cli\u003eFor shower floors, repeat step 2 after 15 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eConsumption 50-100 ml\/m² depending on joint width and depth. Surface is walk-safe after 1 h; full resistance builds in 12-24 h.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formulation bonds to all absorbent cementitious joints between \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, and other stones. Because it is neutral, it will not etch acid-sensitive stones such as limestone. Do not use on epoxy grout, damp joints, or silicone seals.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep cleaning before protection, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-cleaner\"\u003eKF Grout Cleaner\u003c\/a\u003e. For weekly maintenance that refreshes the protective layer, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMask tile edges with 5 mm tape on polished marble; saves 10 min of buffing residue.\u003c\/li\u003e\n\u003cli\u003eWarm the room to 18 °C: viscosity drops 15 %, penetration improves.\u003c\/li\u003e\n\u003cli\u003eLog reapplication in your phone calendar; UV and cleaners reduce lifespan to 12 months in showers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119808332,"sku":"116-21-B","price":28.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/116.webp?v=1772467333"},{"product_id":"lithofin-care-kit-ceramic-worktops","title":"Lithofin KF Care Set for Ceramic Countertops (Compact)","description":"\u003cp\u003eYour polished ceramic island looks dull after weeks of cooking splashes and coffee rings. Daily wiping leaves smears, and abrasive powders threaten the glaze. Lithofin KF Maintenance Set restores the crisp, streak-free finish in your kitchen within minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat Maintenance Set Does\u003c\/h2\u003e\n\u003cp\u003eMaintenance Set is a mildly alkaline cleaner and conditioner kit for glazed ceramic and sintered \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e worktops. The  pH 9.5 spray dissolves grease, tannin, and limescale film, while the  pH 8.5 wipe-on polish lays down a nanometre-thin protective layer that resists new deposits for up to 72 h. Each 500 ml bottle treats 300 m² at 1:20 dilution, cutting average kitchen upkeep time by 40 %.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDaily wipe-down of a ceramic hob at 1:40.\u003c\/li\u003e\n\u003cli\u003ePost-meal degreasing of a porcelain breakfast bar at 1:20.\u003c\/li\u003e\n\u003cli\u003eWeekly refresh of a utility-room splashback at 1:30.\u003c\/li\u003e\n\u003cli\u003eQuick spot-clean of coffee stains on a \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e table at full strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake cleaner, spray 20 ml per m² evenly over the surface.\u003c\/li\u003e\n\u003cli\u003eSpread with a microfibre pad, allow 2 minutes contact.\u003c\/li\u003e\n\u003cli\u003eRinse with 100 ml clean water per m² and wipe dry.\u003c\/li\u003e\n\u003cli\u003eApply polish undiluted, buff after 5 minutes with a dry cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 30-50 m² per application. Surfaces are food-safe when dry; curing time 10 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula bonds to fired silica matrices, making it ideal for glazed ceramic (Mohs 5) and dense \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e (Mohs 7). Alkali reserves lift acidic residues without etching, and the low-viscosity carrier penetrates medium porosity tiles evenly. Do not use on unglazed limestone or marble.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep descaling after grouting, use Lithofin KF Intensive Cleaner. For sealing unglazed quarry tiles, choose Lithofin KF Protector. Maintenance Set remains the go-to for day-to-day hygiene.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 25 °C before spraying; solubility of grease rises by 15 % per 10 °C.\u003c\/li\u003e\n\u003cli\u003eUse distilled water for the rinse in hard-water areas to avoid 0.1 g\/m² lime spots.\u003c\/li\u003e\n\u003cli\u003eBuff with a white pad; darker pads may contain oxides that leave grey streaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119906636,"sku":"204-11-B","price":32.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/204.webp?v=1772467430"},{"product_id":"lithofin-kf-conditioning-cleaner","title":"Lithofin KF Conditioning Cleaner","description":"\u003cp\u003eYour porcelain kitchen floor streaks after every mop, and the grout lines in the shower feel slightly tacky. Conditioning Cleaner ends that cycle by leaving tiles and grout film-free with a single wipe.\u003c\/p\u003e\n\u003ch2\u003eWhat Conditioning Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eConditioning Cleaner is a pH-neutral maintenance cleaner for porcelain, ceramic, and clinker tiles. At pH 7.5 it suspends grease molecules and soap residues, then encapsulates them so you lift away the dirt without leaving surfactant films. Added care additives form an invisible, non-slip sheen that repels new soil for up to 24 hours.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePorcelain kitchen floor daily mop - dilute 1-2 capfuls in 5 L water. \u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003eDaily-maintenance\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCeramic bathroom walls after shower - same 1-2 capfuls per 5 L; wipe and leave, no rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eClinker\u003c\/a\u003e hallway traffic film - 2 capfuls per 5 L for heavier dirt.\u003c\/li\u003e\n\u003cli\u003eGlass-mosaic splashback - 1 capful per 5 L for streak-free gloss.\u003c\/li\u003e\n\u003cli\u003eQuartz-composite vanity top - 1 capful per 5 L; spray bottle works for spot cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAdd 5 L warm water to a clean bucket, then pour in 1-2 capfuls (10-20 ml).\u003c\/li\u003e\n\u003cli\u003eSoak a flat microfiber mop, wring until damp, and work the floor in 5 m² sections.\u003c\/li\u003e\n\u003cli\u003eRinse mop in the same solution; no clear water rinse required.\u003c\/li\u003e\n\u003cli\u003eAllow the surface to air dry; you can walk on it immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 100-200 m² per litre of concentrate, equal to 5-10 ml \/ m². Drying time: none.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral formula glides over acid-sensitive marble yet cleans hard \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e equally well. Low surfactant content prevents film on \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e. Because no free alkali or acid is present, you avoid etching on limestone or colour shift on \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Safe on every tile surface; do not use as a stone degreaser - choose KF Intensive Cleaner for that.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor monthly deep cleaning of wax or polymer build-up, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-intensive-cleaner\"\u003eKF Intensive Cleaner\u003c\/a\u003e. For sealing grout lines after a renovation, apply \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e. Conditioning Cleaner remains your day-to-day solution.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch the mop water after 50 m²; suspended dirt lowers coverage by 20 % if left in solution.\u003c\/li\u003e\n\u003cli\u003eUse distilled water in hard-water areas (\u0026gt;15 °dH) to avoid calcium streaks.\u003c\/li\u003e\n\u003cli\u003eAdd warm (40 °C) water in winter; higher temperature boosts surfactant action by 15 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880120037708,"sku":"182-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880120070476,"sku":"182-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582551372,"sku":"182-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/182.webp?v=1772467398"},{"product_id":"lithofin-care-kit-bathroom","title":"Lithofin Care Set for Bathrooms","description":"\u003cp\u003eSoap film clouds your shower glass, while a faint lime rim clings to the marble sill. You need one kit that keeps all bathroom surfaces-acid-sensitive or not-spotless. The Lithofin KF Bathroom Maintenance Set solves both daily wipe-downs and periodic descaling in one box.\u003c\/p\u003e\n\n\u003ch2\u003eWhat KF Bathroom Set Does\u003c\/h2\u003e\n\u003cp\u003eKF Bathroom Set is a dual-action neutral and mildly acidic cleaner kit for mixed bathroom surfaces. The pH 7.5 daily spray lifts body oil, soap, and cosmetic residue within 60 seconds, while the pH 2.5 weekly spray dissolves limescale by converting CaCO₃ to water-soluble Ca²⁺ salts. A 500 ml bottle covers up to 12 m² when misted at 40 ml\/m².\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble vanity tops after morning use - spray undiluted, wipe immediately. \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003e\/pages\/stone-marble\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGlass mosaic shower walls with hard-water spots - spray acidic bottle, leave 2 min, rinse. Dilution 1:1 for stubborn scale. \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003e\/pages\/stone-glass-mosaic\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCeramic floor tiles in guest baths for daily hygiene - neutral bottle, no rinse, use 30 ml\/m². \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003e\/pages\/stone-ceramic\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLimestone window sills in wet rooms for weekly refresh - neutral bottle only, undiluted. \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003e\/pages\/stone-limestone\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGeneral bathroom \u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e between deep cleans.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the chosen bottle for 5 seconds and set sprayer to “fine mist”.\u003c\/li\u003e\n\u003cli\u003eSpray a contiguous 1 m² area from 20 cm distance using 8 ml product.\u003c\/li\u003e\n\u003cli\u003eSpread with a soft sponge; allow 60 s contact for neutral cleaner or 2 min for acidic cleaner.\u003c\/li\u003e\n\u003cli\u003eRinse with 0.5 L clean water or wipe dry with a microfiber cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach bottle treats 10-12 m². Surfaces are touch-dry in 5 minutes at 20 °C; the acidic cleaner is food-safe after a final rinse.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral formula is safe on acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e (Mohs 3) and \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e because it matches their natural pH and will not etch. The acidic spray is reserved for acid-resistant granite, porcelain, and glass mosaic, attacking mineral scale without affecting their Mohs 6-7 hardness. Do not use the acidic bottle on polished marble, terrazzo, or other calcareous stones.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor monthly deep \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral-cleaning\u003c\/a\u003e, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e at 1:5. For heavy limescale on granite, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-cement-residue-remover\"\u003eKF Cement Residue Remover\u003c\/a\u003e. The KF Bathroom Set remains your first line for quick upkeep.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 25 °C with shower water before spraying; higher temperature doubles reaction speed.\u003c\/li\u003e\n\u003cli\u003eSqueegee glass after each shower to cut weekly acidic cleaner use by 40 %.\u003c\/li\u003e\n\u003cli\u003eSwitch cloths every 5 m²; saturated fibers redeposit soap residue.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120201548,"sku":"205-11-B","price":34.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/205.webp?v=1772467432"},{"product_id":"lithofin-kf-hyclean","title":"Lithofin KF HyClean for Ceramic Countertops","description":"\u003cp\u003eYour ceramic hob shows greasy fingerprints and dried sauce splashes after every meal. Kitchen worktops collect oil mist and coffee rings. Hyclean ends this build-up in one pass, leaving the surface food-safe and streak-free.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Hyclean Does\u003c\/h2\u003e\n\u003cp\u003eHyclean is a neutral cleaner for glazed ceramic and \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e surfaces. The pH 9.5 solution breaks the bond between fats, sugars and the low-porosity surface within 60 seconds, so you wipe them away rather than spread them. A quaternary ammonium compound at 0.25 % inhibits 99.9 % of common kitchen bacteria in 5 minutes while leaving no visible film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDaily wipe-down of a ceramic hob - spray undiluted (1 : 1) to remove cooking grease.\u003c\/li\u003e\n  \u003cli\u003eDegreasing a porcelain sink after raw meat prep - spray undiluted (1 : 1) for 5 minutes contact time.\u003c\/li\u003e\n  \u003cli\u003eRefreshing a ceramic splashback with dried tomato sauce - spray undiluted (1 : 1) and loosen residue with a microfiber pad.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eGeneral cleaning\u003c\/a\u003e of large polished-porcelain tiles - mist 40 ml\/m² (1 : 1) and wipe with a flat mop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eHold the trigger 20 cm from the surface and spray an even film (≈40 ml\/m²).\u003c\/li\u003e\n  \u003cli\u003eLeave Hyclean to act for exactly 5 minutes; keep the area wet.\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp microfiber cloth, working in overlapping circles.\u003c\/li\u003e\n  \u003cli\u003eRinse the cloth under warm water and give the surface a final pass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre treats 30-35 m², enough for 120 standard kitchen worktop cleanings. No drying time is needed; you can place food directly once the surface feels touch-dry.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse Hyclean on \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e tiles, fine-porcelain slabs and vitrified mosaics. The neutral pH avoids etching, and the low 0.4 % solvent content will not soften factory sealants. Do not use on acid-sensitive natural stone or unsealed wood.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy lime scale on taps, use Lithofin KF Bathroom Cleaner. For deep grease in grout joints, switch to Lithofin KF Intensive Cleaner. Hyclean covers the everyday wipe-down between those two tasks.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the surface to 30 °C by running hot water first; the cleaner works 20 % faster.\u003c\/li\u003e\n  \u003cli\u003eUse two cloths: one for the first wipe, one for the rinse, to avoid redepositing oils.\u003c\/li\u003e\n  \u003cli\u003eSwitch nozzles to the fine-mist setting on vertical splashbacks; runoff drops by 60 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120267084,"sku":"129-11-EU","price":20.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/129.webp?v=1772467336"},{"product_id":"lithofin-kf-hyclean-spray","title":"Lithofin KF HyClean for Ceramic Countertops","description":"\u003cp\u003eYour ceramic hob shows greasy fingerprints and dried sauce splashes after every meal. Kitchen worktops collect oil mist and coffee rings. Hyclean ends this build-up in one pass, leaving the surface food-safe and streak-free.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Hyclean Does\u003c\/h2\u003e\n\u003cp\u003eHyclean is a neutral cleaner for glazed ceramic and \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e surfaces. The pH 9.5 solution breaks the bond between fats, sugars and the low-porosity surface within 60 seconds, so you wipe them away rather than spread them. A quaternary ammonium compound at 0.25 % inhibits 99.9 % of common kitchen bacteria in 5 minutes while leaving no visible film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDaily wipe-down of a ceramic hob - spray undiluted (1 : 1) to remove cooking grease.\u003c\/li\u003e\n  \u003cli\u003eDegreasing a porcelain sink after raw meat prep - spray undiluted (1 : 1) for 5 minutes contact time.\u003c\/li\u003e\n  \u003cli\u003eRefreshing a ceramic splashback with dried tomato sauce - spray undiluted (1 : 1) and loosen residue with a microfiber pad.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eGeneral cleaning\u003c\/a\u003e of large polished-porcelain tiles - mist 40 ml\/m² (1 : 1) and wipe with a flat mop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eHold the trigger 20 cm from the surface and spray an even film (≈40 ml\/m²).\u003c\/li\u003e\n  \u003cli\u003eLeave Hyclean to act for exactly 5 minutes; keep the area wet.\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp microfiber cloth, working in overlapping circles.\u003c\/li\u003e\n  \u003cli\u003eRinse the cloth under warm water and give the surface a final pass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre treats 30-35 m², enough for 120 standard kitchen worktop cleanings. No drying time is needed; you can place food directly once the surface feels touch-dry.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse Hyclean on \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e tiles, fine-porcelain slabs and vitrified mosaics. The neutral pH avoids etching, and the low 0.4 % solvent content will not soften factory sealants. Do not use on acid-sensitive natural stone or unsealed wood.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy lime scale on taps, use Lithofin KF Bathroom Cleaner. For deep grease in grout joints, switch to Lithofin KF Intensive Cleaner. Hyclean covers the everyday wipe-down between those two tasks.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the surface to 30 °C by running hot water first; the cleaner works 20 % faster.\u003c\/li\u003e\n  \u003cli\u003eUse two cloths: one for the first wipe, one for the rinse, to avoid redepositing oils.\u003c\/li\u003e\n  \u003cli\u003eSwitch nozzles to the fine-mist setting on vertical splashbacks; runoff drops by 60 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"Lithofin HyClean - 1 Liter","offer_id":56880120398156,"sku":"129-21-EU","price":16.95,"currency_code":"EUR","in_stock":false},{"title":"Lithofin HyClean - 500 ml","offer_id":56880120430924,"sku":"129-21-EU","price":20.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/129_62e89e96-f74f-403f-87b9-268e3791808f.webp?v=1772467339"},{"product_id":"lithofin-kf-silicone-remover","title":"Lithofin KF Silicone Remover","description":"\u003cp\u003eOld, blackened silicone joints around your shower tray cling stubbornly to the glazed edges of the tiles. You scrape, the blade skips, and the silicone smears instead of lifting. KF Silicone Remover breaks that bond so you peel the joint off cleanly without scratching the porcelain.\u003c\/p\u003e\n\n\u003ch2\u003eWhat KF Silicone Remover Does\u003c\/h2\u003e\n\u003cp\u003eKF Silicone Remover is an acidic solvent gel cleaner for ceramic and porcelain surfaces. A blend of aliphatic hydrocarbons and mild organic acids (pH ≈ 2) penetrates cured silicone, swells the polymer matrix by 150 %, and detaches it from the substrate. The thixotropic gel clings vertically for up to 90 minutes, giving the active ingredients time to dissolve adhesion promoters and fillers.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBathroom wall joints on \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic tiles\u003c\/a\u003e - use neat, 1 mm gel layer.\u003c\/li\u003e\n  \u003cli\u003eShower tray edges on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain stoneware\u003c\/a\u003e - use neat, 1 mm layer.\u003c\/li\u003e\n  \u003cli\u003eMirror edges on glass-mosaic backsplashes - use neat, 0.5 mm layer.\u003c\/li\u003e\n  \u003cli\u003eCountertop upstands on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e - use neat, 1 mm layer.\u003c\/li\u003e\n  \u003cli\u003eRemoval of smeared silicone prior to \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003edeep cleaning\u003c\/a\u003e - use neat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eMask acid-sensitive adjacent materials such as anodised aluminium.\u003c\/li\u003e\n  \u003cli\u003eSpread a continuous 1 mm gel coat with a plastic spatula; do not dilute.\u003c\/li\u003e\n  \u003cli\u003eAllow to dwell 20-90 min until the joint swells and turns matt.\u003c\/li\u003e\n  \u003cli\u003eLift silicone with a plastic scraper, then wipe residues with a dry cloth.\u003c\/li\u003e\n  \u003cli\u003eRinse the area thoroughly with warm water and a pH-neutral cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage consumption 10-20 m² \/L depending on joint thickness. No drying time: new silicone can be applied immediately after the surface is bone-dry.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe gel sits safely on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e, and low-porosity stones such as basalt because these materials are acid-resistant (Mohs 5-7) and non-absorbent, so the solvents do not stain. Good results are also achieved on granite, slate, concrete, quartz-composite, and clinker. Do not use on lacquered metals, acrylic tubs, or any surface not resistant to solvents and acids.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor ongoing tile maintenance after silicone removal, use \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eKF Care\u003c\/a\u003e 1:100 in warm water. For long-term stain defence on absorbent stone, apply KF Stain-Stop at 10 m² \/L once the new joint has cured.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eScore the old joint on both sides with a utility knife first; the gel penetrates faster, cutting dwell time by up to 30 minutes.\u003c\/li\u003e\n  \u003cli\u003eCover freshly applied gel with plastic film to slow evaporation on vertical surfaces; this increases penetration depth by 20 %.\u003c\/li\u003e\n  \u003cli\u003eWarm the area to 25 °C with a hair dryer before application; higher temperature lowers silicone hardness (Shore A) and speeds swelling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120496460,"sku":"113-21-B","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/113.webp?v=1772467326"},{"product_id":"lithofin-kf-grout-cleaner","title":"Lithofin KF Grout Cleaner","description":"\u003cp\u003eYour bathroom grout looks grey after only six months, soap residue has glued dust into the joints, and standard tile cleaners slide off the problem. Lithofin KF Grout Cleaner solves this exact situation, restoring bright lines between tiles in five minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat KF Grout Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eKF Grout Cleaner is an acidic cleaner for ceramic and porcelain tile grout. At pH 1.5 it breaks down calcium-based limescale, soap fats, and iron stains by converting them into water-soluble salts you rinse away. Surfactants lift organic grime so you scrub 30 % less, and the ready-to-use gel stays on vertical joints for a full 5-minute dwell time.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShower walls with mould-free but grey grout - use undiluted, 120 ml\/m²\u003c\/li\u003e\n\u003cli\u003eKitchen floor joints darkened by grease splash - use undiluted, 150 ml\/m²\u003c\/li\u003e\n\u003cli\u003eOutdoor porcelain patio joints with rust flecks - use undiluted, 130 ml\/m²\u003c\/li\u003e\n\u003cli\u003ePre-sealing clean before \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e - use undiluted, 100 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle, then brush the undiluted liquid directly onto the grout lines at 100-150 ml\/m² - use a nylon grout brush.\u003c\/li\u003e\n\u003cli\u003eWait 5-10 minutes; keep the area wet by re-brushing every 2 minutes.\u003c\/li\u003e\n\u003cli\u003eScrub until the original grout colour re-appears; rinse twice with clean water.\u003c\/li\u003e\n\u003cli\u003eNeutralise any splashes on acid-sensitive stone with water and \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne 500 ml bottle covers 3-5 m² of joint area. Joints dry in 15 minutes; you can re-seal after 60 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eYou safely use the product around \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e because their Mohs hardness is 5-7 and they resist acids. The low-viscosity gel stays in the grout groove, so polished tiles stay untouched. Do not use on marble or other acid-sensitive stone grout joints without masking.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor ongoing weekly maintenance of tile surfaces, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For long-term stain protection after the grout is clean and dry, apply \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e at 40 ml\/m².\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm joints to 20 °C before cleaning; reaction speed doubles versus 10 °C.\u003c\/li\u003e\n\u003cli\u003eUse a toothbrush for 3 mm mosaic joints to keep the 100 ml\/m² dosage accurate.\u003c\/li\u003e\n\u003cli\u003eRinse with de-ionised water if you live in a hard-water area; this prevents new limescale from forming.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120594764,"sku":"115-21-B","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/115.webp?v=1772467330"},{"product_id":"lithofin-wexa","title":"Lithofin WEXA All-Purpose Cleaner","description":"\u003cp\u003eThick layers of kitchen grease, soot from a fireplace, or rubber forklift tracks can leave your floor looking permanently stained. One pass with Lithofin WEXA solves the mess, restoring slip-resistant grip on a 200 m² warehouse floor or the shine on a marble lobby.\u003c\/p\u003e\n\u003ch2\u003eWhat WEXA Does\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWEXA is an alkaline intensive cleaner for natural stone, ceramic, porcelain, and concrete.\u003c\/strong\u003e With a pH of 12.5 in concentrate, the surfactant blend breaks the polar bonds of fats, soot, and polymer care films. Undiluted it saponifies greasy deposits within 5 minutes; at 1:20 it lifts everyday soil without attacking acid-sensitive marble.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIndustrial concrete floors with forklift rubber marks - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eGrease-laden kitchen \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e counters - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eSoot on a sandstone fireplace - dilute 1:5 or use neat.\u003c\/li\u003e\n\u003cli\u003ePre-seal deep clean on polished \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e - dilute 1:20.\u003c\/li\u003e\n\u003cli\u003ePost-construction \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e on porcelain tiles - dilute 1:10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet surface to reduce absorbency; mix WEXA to the chosen ratio in a bucket (e.g. 1 L WEXA + 4 L water for 1:5).\u003c\/li\u003e\n\u003cli\u003eSpread with mop, white pad, or scrubbing machine, ensuring 100-200 ml\/m² saturation. Work in 10 m² sections.\u003c\/li\u003e\n\u003cli\u003eAllow 5-10 minutes contact; keep wet and agitate with a brush.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water or wet-vacuum, then allow the surface to air-dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 3-15 m²\/L: 3 m² on rough cotto undiluted, 15 m² on glazed ceramic at 1:20. No drying time-surface is ready for traffic as soon as rinse water is removed.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on dense substrates such as porcelain, basalt, and concrete because the alkaline formula emulsifies oils without etching. Good on acid-sensitive stones-\u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, terrazzo, or \u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e-when diluted 1:20, as the high pH stays at the surface film. Do not use on aluminium trim or sensitive painted cabinetry.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor daily maintenance after the deep clean, switch to \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e at pH 9. For long-term stain resistance, seal the dry surface with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Heavy organic stains that persist after WEXA may require Lithofin OIL-EX paste.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm water (30 °C) accelerates grease dissolution by 18 %-use it on commercial kitchen floors.\u003c\/li\u003e\n\u003cli\u003eOn highly porous sandstone, pre-wet until the stone darkens evenly; this prevents deep chemical penetration.\u003c\/li\u003e\n\u003cli\u003eVacuum rinse water immediately on polished marble to avoid redepositing loosened wax films.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880120693068,"sku":"012-11-B","price":20.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880120725836,"sku":"012-11-B","price":68.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582977356,"sku":"012-11-B-DOOS-10","price":186.48,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/012.webp?v=1772467271"},{"product_id":"lithofin-active-cleaner","title":"Lithofin UNI Active Cleaner","description":"\u003cp\u003eYour outdoor porcelain patio collects greasy barbecue splatters, traffic film, and winter algae in one grimy layer. Inside, the kitchen’s honed limestone floor shows dark oil spots after every family dinner. Universal Actiefreiniger cuts through that embedded dirt in 10 minutes, restoring both areas to a uniform, slip-safe finish.\u003c\/p\u003e\n\u003ch2\u003eWhat Actiefreiniger Does\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eActiefreiniger is an alkaline cleaner for all mineral and ceramic surfaces.\u003c\/strong\u003e At pH 10.5 it breaks the electrical bond between fats, soap scum, and the stone lattice, lifting residue that neutral soaps leave behind. Surfactants with a 3 % concentration encapsulate loosened dirt so you rinse everything away without redeposition.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOil-stained \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops - spray neat, leave 5 min.\u003c\/li\u003e\n\u003cli\u003eWeather-blackened outdoor \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic tiles\u003c\/a\u003e - dilute 1 : 5 in warm water.\u003c\/li\u003e\n\u003cli\u003eGreasy restaurant \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e kitchen floor - mop with 1 : 10 solution.\u003c\/li\u003e\n\u003cli\u003eAfter building dust on new \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e pavers - scrub with 1 : 3 mix.\u003c\/li\u003e\n\u003cli\u003ePeriodic deep clean before sealing with Universal Stain-Stop - use full strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet surface with clean water to reduce absorption - 2 L per m² (PT1M).\u003c\/li\u003e\n\u003cli\u003eApply Actiefreiniger by sprayer or mop at selected dilution - 100 ml per m² (PT2M).\u003c\/li\u003e\n\u003cli\u003eAgitate with white pad or deck brush; keep wet for 5 minutes (PT5M).\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water until runoff is clear (PT2M).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage coverage is 10-20 m² \/L depending on porosity. No drying time: you rinse immediately, the surface is traffic-ready as soon as water evaporates, usually within 15 minutes at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe alkaline formula will not etch acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e or \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e because it contains no free acids; it excels on dense stones such as basalt (Mohs 7) and porcelain (water absorption \u0026lt; 0.5 %). High wetting agents penetrate high-porosity sandstone pores, carrying dirt out. Do not use on polished aluminium or lacquered wood.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term stain resistance after cleaning, use \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eUniversal Stain-Stop\u003c\/a\u003e. For routine weekly maintenance, switch to \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eUniversal Wash \u0026amp; Clean\u003c\/a\u003e at 20 ml per 10 L.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork in 5 m² sections; controlled dwell avoids drying streaks.\u003c\/li\u003e\n\u003cli\u003eBoost action on porous sandstone by covering with plastic film during dwell to keep solution active longer.\u003c\/li\u003e\n\u003cli\u003eUse warm (40 °C) dilution to cut grease 30 % faster in commercial kitchens.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"2,5 liter","offer_id":56880120856908,"sku":"043-44-B","price":32.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter","offer_id":56880120889676,"sku":"043-44-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"2,5 liter (doos van 4)","offer_id":57401583010124,"sku":"043-44-B-DOOS-4","price":117.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583075660,"sku":"043-44-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/043.webp?v=1772467296"},{"product_id":"lithofin-splash-stop-w","title":"Lithofin Splash-Stop \u003eW\u003c","description":"\u003cp\u003eYour patio flags darken after every rain and the kitchen backsplash absorbs oil splashes within minutes. Splash-Stop W blocks water and oil without changing the feel or colour of the stone, giving you time to wipe spills before they soak in.\u003c\/p\u003e\n\u003ch2\u003eWhat Splash-Stop W Does\u003c\/h2\u003e\n\u003cp\u003eSplash-Stop W is a neutral impregnator for absorbent natural stone and unglazed ceramics. The 0 % solvent, pH ≈ 7 formula lines capillaries with nano-sized polysiloxanes, reducing water uptake by ≥ 90 % while letting vapour escape. One coat at 40 ml\/m² seals pores up to 0.2 µm, so food stains and algae spores cannot anchor.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished vanity tops in bathrooms - apply undiluted 40 ml\/m² after deep cleaning with \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eRough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e barbecue surrounds - one flood coat undiluted 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003eSandstone\u003c\/a\u003e garden paths before winter freeze-thaw - undiluted 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eUnglazed \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic tile\u003c\/a\u003e splashbacks - undiluted 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eHigh-porosity \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e floors needing a matte finish - two wet-on-wet passes, each 40 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the surface is dry (\u0026lt; 2 % moisture) and free of wax or grout haze.\u003c\/li\u003e\n\u003cli\u003eBrush, roller, or low-pressure spray a generous, even coat undiluted (40 ml\/m²).\u003c\/li\u003e\n\u003cli\u003eAfter 10 minutes, redistribute puddles with a dry roller to avoid gloss spots.\u003c\/li\u003e\n\u003cli\u003eLet the surface dry ventilated; protect from water for 4 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage is 25 m²\/L on all listed substrates. Full water repellency develops after 24 hours; re-impregnate every 12-24 months on high-traffic zones.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eSplash-Stop W excels on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, cotto, and \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e because its small molecules penetrate dense matrices without leaving a film. The neutral chemistry will not etch acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e or \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e. Use confidently on \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, and \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e. Do not use on fully glazed or polished non-absorbent tiles that require a sheen.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stripping old wax or cement film before sealing, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e. For kitchens needing strong oil resistance, finish with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e instead of Splash-Stop W.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTest absorbency by dropping 1 ml of water; if it darkens within 30 seconds, impregnation is needed.\u003c\/li\u003e\n\u003cli\u003eWarm stone (15-25 °C) opens pores by up to 18 %, increasing penetration depth.\u003c\/li\u003e\n\u003cli\u003eRinse application tools immediately; cured polysiloxane hardens in 20 minutes and is difficult to remove.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880121020748,"sku":"053-11-B","price":23.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880121053516,"sku":"053-11-B","price":82.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583239500,"sku":"053-11-B-DOOS-10","price":215.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/053.webp?v=1772467302"},{"product_id":"lithofin-stainstop-plus","title":"Lithofin Stainstop PLUS","description":"\u003cp\u003eYour new kitchen combines porous sandstone tiles with a polished granite island. Cooking oils, red wine, and everyday spills threaten both surfaces. Stainstop PLUS blocks these liquids before they penetrate, giving you a single treatment for the whole room.\u003c\/p\u003e\u003ch2\u003eWhat Stainstop PLUS Does\u003c\/h2\u003e\u003cp\u003eStainstop PLUS is a neutral impregnator for natural stone, engineered stone, concrete, and unglazed ceramics. With a pH of 7 ± 1, its fluorinated polymers bond inside pores smaller than 0.1 µm, creating a water-repellent (contact angle \u0026gt;100°) and oil-repellent barrier. One coat resists coffee and oil for 24 h ASTM F925; two coats reach 72 h. Coverage ranges from 5 m²\/L on very porous \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e to 20 m²\/L on polished \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhen to Use\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFreshly installed rough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops - apply undiluted, 80-100 ml\/m².\u003c\/li\u003e\n\u003cli\u003eHigh-porosity \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e floors - two coats undiluted, 100 ml + 60 ml\/m².\u003c\/li\u003e\n\u003cli\u003eBathroom marble vanity after deep cleaning - single coat undiluted, 50-70 ml\/m².\u003c\/li\u003e\n\u003cli\u003eConcrete patio before winter - single coat undiluted, 70-90 ml\/m².\u003c\/li\u003e\n\u003cli\u003eMixed-surface projects when you are unsure which sealer fits - one universal undiluted coat, 60 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow to Apply\u003c\/h2\u003e\u003col\u003e\n\u003cli\u003eEnsure the surface is dry \u0026lt;0.5 % moisture; wait 24-48 h after washing.\u003c\/li\u003e\n\u003cli\u003ePour Stainstop PLUS undiluted into a paint tray and load a lint-free roller.\u003c\/li\u003e\n\u003cli\u003eSpread a thin, even film; keep the surface wet for 2 min, then massage with a white pad.\u003c\/li\u003e\n\u003cli\u003eAfter 10 min, buff off all excess with a dry microfibre cloth; do not leave wet spots.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eAverage coverage: 10-20 m²\/L on dense stone, 5-10 m²\/L on porous tile. Light foot traffic after 2 h; full stain resistance after the 24 h curing period. Reapply every 3-5 years.\u003c\/p\u003e\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\u003cp\u003eThe formula excels on \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, sandstone, slate, bluestone, terrazzo, and \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e because it penetrates deep without clogging pores. Neutral pH means it never etches acid-sensitive marble or cotto. Good results appear on basalt, unglazed \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e. Do not use on glazed tiles, glass, or any wet surface.\u003c\/p\u003e\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\u003cp\u003eFor daily cleaning of sealed floors, use \u003ca href=\"\/en-ie\/products\/lithofin-easy-care\"\u003eEASY-CARE\u003c\/a\u003e. For periodic intensive cleaning before resealing, choose \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. If you maintain ceramic shower walls, \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e prevents soap build-up without stripping the impregnation.\u003c\/p\u003e\u003ch2\u003ePro Tips\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWarm the stone to 20 °C before application; penetration increases by up to 15 % compared to 10 °C.\u003c\/li\u003e\n\u003cli\u003eOn very porous sandstone, cross-roll the second coat within 30 min for uniform absorption.\u003c\/li\u003e\n\u003cli\u003eTest absorbency: if water beads for 10 s, one coat is sufficient; if it darkens sooner, apply a second coat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"250 ml","offer_id":56880121479500,"sku":"188-11-B","price":29.95,"currency_code":"EUR","in_stock":false},{"title":"500ml","offer_id":56880121512268,"sku":"188-11-B","price":38.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter","offer_id":56880121545036,"sku":"188-11-B","price":52.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880121577804,"sku":"188-11-B","price":181.95,"currency_code":"EUR","in_stock":false},{"title":"250 ml (doos van 12)","offer_id":57401583436108,"sku":"188-11-B-DOOS-12","price":319.03,"currency_code":"EUR","in_stock":false},{"title":"500ml (doos van 12)","offer_id":57401583501644,"sku":"188-11-B-DOOS-12","price":416.28,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583534412,"sku":"188-11-B-DOOS-10","price":474.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/188.webp?v=1772467411"},{"product_id":"lithofin-multi-seal","title":"Lithofin MULTI-SEAL","description":"\u003cp\u003eYour newly laid matte gres kitchen floor clouds over every time you mop, and rough terracotta in the hallway still looks dusty no matter how hard you scrub. Multi-Seal ends that cycle by locking out dirt and adding a subtle satin finish in one fast coat.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Multi-Seal Does\u003c\/h2\u003e\n\u003cp\u003eMulti-Seal is a neutral film-forming protector for porous and slightly textured indoor surfaces. The solvent-acrylate resin flows into capillaries ≤0.2 mm, dries in under 10 minutes, and hardens to a 0.5 µm layer that blocks oil, coffee, and dirt while raising colour depth by up to 15 %. At 12-15 m²\/L you seal an average 25 m² kitchen with 2 L.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMatte gres tiles in a busy kitchen - apply neat, 80 ml\/m².\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eTerracotta\u003c\/a\u003e hallway that absorbs every spill - apply neat, 80 ml\/m².\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eClinker\u003c\/a\u003e mud-room floor before winter salt - apply neat, 80 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eRough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e window ledges for easier dusting - apply neat, 80 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eAfter \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003edeep cleaning\u003c\/a\u003e a stone shower - apply neat, 80 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eClean the surface thoroughly and let it dry to ≤4 % moisture.\u003c\/li\u003e\n  \u003cli\u003ePour Multi-Seal into a paint tray; do not dilute.\u003c\/li\u003e\n  \u003cli\u003eSpread evenly with an applicator or microfiber pad, working 2 m² sections and maintaining a wet edge.\u003c\/li\u003e\n  \u003cli\u003eAllow to dry 10 minutes; walk-safe immediately, full hardness after 2 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage 12-15 m²\/L; one 1 L bottle treats a 14 m² bathroom. No re-coat needed unless traffic dulls the sheen.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent results on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e, terracotta, cotto, and clinker because the neutral resin bonds without etching acid-sensitive minerals. Good on marble, limestone, sandstone, slate, bluestone, basalt, granite, concrete, and terrazzo; always test first as colour enhancement varies. Do not use on any surface directly exposed to rain, UV, or freeze-thaw cycles.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing before sealing, use \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eUniversal Cleaner\u003c\/a\u003e diluted 1:10. For invisible oil and wine resistance on polished stone, use Universal Stain-Stop. Multi-Seal sits between them, giving both stain protection and a satin finish.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBuff with a white pad after 15 minutes to raise gloss by an extra 5 GU; avoids streaks.\u003c\/li\u003e\n  \u003cli\u003eOn very porous cotto apply a second coat wet-on-wet within 5 minutes; this cuts future maintenance time by 30 %.\u003c\/li\u003e\n  \u003cli\u003eRefresh high-traffic zones annually with a 1:4 mix of Multi-Seal and water; saves product and keeps a uniform sheen.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880121676108,"sku":"095-11-B","price":30.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/095.webp?v=1772467318"},{"product_id":"lithofin-easy-care","title":"Lithofin EASY-CARE","description":"\u003cp\u003eYour lobby has polished marble, rough granite entrances, and ceramic restrooms. Different cleaners leave streaks or etch marks, so staff avoid mopping. EASY-CARE solves the daily-maintenance stand-off with one pH-neutral solution for every floor.\u003c\/p\u003e\n\n\u003ch2\u003eWhat EASY-CARE Does\u003c\/h2\u003e\n\u003cp\u003eEASY-CARE is a neutral maintenance cleaner for mixed stone, tile, and composite surfaces. At pH 7 it suspends dirt with non-ionic surfactants, then evaporates without residue. One 1-2 capful dose (25-50 ml) in 5 L water covers 100-200 m², leaving a micro-thin care film that boosts lustre by up to 15 % gloss units.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePolished bathroom \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e - 2 capfuls\/5 L for soap scum buildup.\u003c\/li\u003e\n  \u003cli\u003eRough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e entry steps - 2 capfuls\/5 L after heavy foot traffic.\u003c\/li\u003e\n  \u003cli\u003eOffice \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e flooring - 1 capful\/5 L for daily walk-off dirt.\u003c\/li\u003e\n  \u003cli\u003eHigh-porosity \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e kitchen tops - 1 capful\/5 L for grease splashes.\u003c\/li\u003e\n  \u003cli\u003ePost-project cleanup on mixed floors - 2 capfuls\/5 L before \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e with stronger products.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eAdd 1-2 capfuls (25-50 ml) EASY-CARE to 5 L warm water. Stir for 5 seconds.\u003c\/li\u003e\n  \u003cli\u003eSoak microfiber mop, wring to damp; surface contact time PT0M.\u003c\/li\u003e\n  \u003cli\u003eWipe floor in overlapping passes. Rinsing not required.\u003c\/li\u003e\n  \u003cli\u003eAllow floor to air-dry; traffic can resume immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 100-200 m² per diluted litre. No separate drying or curing time.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral formulation avoids etching acid-sensitive stones like \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e while still lifting grime from hard, low-porosity materials such as \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e. Excellent results on sandstone, slate, concrete, terrazzo, basalt, quartz composite, and glass mosaic. Safe for terracotta and cotto, though dedicated cleaners achieve slightly deeper colour enhancement. Universal use means no stated exclusions.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain repellence after cleaning, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For ceramic bathroom tile that needs an additional shield against limescale, apply \u003ca href=\"\/en-ie\/products\/lithofin-kf-protective-impregnator\"\u003eKF Protective Impregnator\u003c\/a\u003e after EASY-CARE has dried.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eChange mop water every 100 m²; saturated solution halves cleaning efficiency.\u003c\/li\u003e\n  \u003cli\u003eBuff high-gloss marble with a dry pad after the floor dries; the care film hardens in 5 minutes and polishes easily.\u003c\/li\u003e\n  \u003cli\u003eFor kitchens, follow with potable-water wipe only if food regulations require zero additive residue.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880121774412,"sku":"031-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880121807180,"sku":"031-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583599948,"sku":"031-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/031.webp?v=1772467283"},{"product_id":"lithofin-patio-cleaner","title":"Lithofin Terrace Cleaner","description":"\u003cp\u003eYour terrace gathers grime, algae stains, and barbecue grease all year. Rain pushes dirt into the pores of porcelain slabs and concrete pavers until regular detergent stops working. Universal Terrassenreiniger removes that build-up in one wash without etching marble borders or fading granite steps.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Universal Terrassenreiniger Does\u003c\/h2\u003e\n\u003cp\u003eUniversal Terrassenreiniger is an alkaline outdoor cleaner for natural stone, porcelain, ceramic, and concrete. The pH 10.5 formula breaks the bond between organic residue and the surface; tensides lift grease while sequestering agents keep dissolved soil in suspension. At 20 °C you see dirt release within 3 minutes even on rough granite. One litre treats up to 100 m², cutting maintenance time by 70 % compared with manual scrubbing.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite patio slabs after winter freeze-thaw cycles  - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eMarble balcony tiles with barbecue smoke deposits  - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/problem-outdoor-cleaning\"\u003eOutdoor-cleaning\u003c\/a\u003e after removing algae with ALGEX  - use undiluted on joints.\u003c\/li\u003e\n\u003cli\u003eCeramic roof terraces before sealing with MN Stain-Stop  - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eSolar panels with traffic film build-up  - dilute 1:10 and rinse with de-ionised water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eBrush or sweep the surface dry, then wet with clean water to cool hot stone. \u003cstrong\u003eTime:\u003c\/strong\u003e 2 min.\u003c\/li\u003e\n\u003cli\u003ePrepare solution: 1 part product to 10 parts water for light soil, 1:5 for medium, or use neat for heavy deposits. \u003cstrong\u003eTime:\u003c\/strong\u003e 1 min.\u003c\/li\u003e\n\u003cli\u003eDistribute evenly with a mop, sponge, or pressure washer lance; keep the area wet for 3-10 min. \u003cstrong\u003eTime:\u003c\/strong\u003e 5 min.\u003c\/li\u003e\n\u003cli\u003eScrub with a stiff deck brush, then rinse thoroughly with plenty of water until runoff is clear. \u003cstrong\u003eTime:\u003c\/strong\u003e 2 min.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 80-100 m²\/L on smooth porcelain and 50-70 m²\/L on textured sandstone. No drying time; the area is traffic-ready immediately after rinsing.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe alkaline blend cleans acid-sensitive \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e without etching because it contains no free acids. Hard stones such as \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, basalt, and \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e withstand the solution even at full strength thanks to their Mohs ≥7 and low porosity. Good results are also achieved on sandstone, slate, terracotta, and concrete. Do not use on polished aluminium or other alkali-sensitive metals.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain protection after cleaning, apply \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For weekly maintenance between deep cleans, add 20 ml of \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e to 10 L of water.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways pre-wet hot stone; evaporation above 30 °C reduces dwell time by 40 % and cleaning power.\u003c\/li\u003e\n\u003cli\u003eUse a rotary surface cleaner on large concrete decks; even distribution prevents streaks and halves labour.\u003c\/li\u003e\n\u003cli\u003eRinse towards garden beds-pH 10.5 runoff neutralises acidic soils and reduces moss regrowth.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880124166476,"sku":"960-11-B","price":20.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880124199244,"sku":"960-11-B","price":67.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583632716,"sku":"960-11-B-DOOS-10","price":186.48,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/960.webp?v=1772467479"},{"product_id":"lithofin-bathroom-cleaner","title":"Lithofin KF Bathroom Cleaner","description":"\u003cp\u003eYour bathroom tiles look dull, chrome taps show water marks, and stone shelves collect soap residue every day. Universal Badreiniger cuts through those calcium-rich deposits in minutes, letting you reset the whole room without harsh scrubbing.\u003c\/p\u003e\n\u003ch2\u003eWhat Universal Badreiniger Does\u003c\/h2\u003e\n\u003cp\u003eUniversal Badreiniger is a mildly alkaline cleaner for bathroom stone, ceramic, glass, enamel, and metal fixtures. At pH 9.5 it breaks the bond between fatty soap scum, light limescale, and surface tension so dirt lifts on contact. Non-aggressive surfactants suspend the loosened grime until you wipe it away, leaving no film and no need for neutralising rinses on most substrates.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished vanity tops in \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e: ready-to-use 1:0 for daily wipe-down.\u003c\/li\u003e\n\u003cli\u003eRough shower floors in \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e: ready-to-use 1:0 after each shower.\u003c\/li\u003e\n\u003cli\u003eWall cladding in \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic tiles\u003c\/a\u003e: ready-to-use 1:0 twice weekly.\u003c\/li\u003e\n\u003cli\u003eGlazed \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e sinks showing toothpaste haze: ready-to-use 1:0 on demand.\u003c\/li\u003e\n\u003cli\u003eDaily-maintenance touch-ups: ready-to-use 1:0, then follow the guide at \u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003edaily maintenance\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eHold the trigger 15 cm from the surface and spray a uniform film (≈10 ml\/m²).\u003c\/li\u003e\n\u003cli\u003eWait 60-120 seconds for the alkaline agents to loosen residues.\u003c\/li\u003e\n\u003cli\u003eWipe with a damp microfiber cloth or sponge, applying light pressure.\u003c\/li\u003e\n\u003cli\u003eRinse with clear water on food-contact or high-polish stone; towel-dry fixtures for streak-free shine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne 500 ml bottle covers 50 m²; a full litre cleans 100 m². The surface is dry immediately; no curing time.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula is safe on acid-sensitive stones because its pH stays below the etch threshold while remaining strong enough to cut bath grime. You can use it confidently on \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, granite, porcelain, and ceramic tiles. It also works on medium-porosity stones such as marble and limestone-test first. Do not use on freshly waxed cotto or other coatings sensitive to alkaline products.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy mineral crusts or builder’s dirt, step up to \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e. For long-term stain protection after cleaning porous stone, seal with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-heat shower walls with warm water; the 40 °C surface temperature speeds chemical activity by about 20 %.\u003c\/li\u003e\n\u003cli\u003eBuff polished chrome dry; any remaining micro-film evaporates, preventing drip marks for up to 48 hours.\u003c\/li\u003e\n\u003cli\u003eInclude Universal Badreiniger in a weekly \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e cycle to maintain sealer performance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"500 ml spray","offer_id":56880124330316,"sku":"306-21-B","price":18.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter","offer_id":56880124363084,"sku":"306-21-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583665484,"sku":"306-21-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/306.webp?v=1772467454"},{"product_id":"lithofin-badreiniger-navulling","title":"Lithofin KF Bathroom Cleaner Refill","description":"\u003cp\u003eYour bathroom tiles look dull, chrome taps show water marks, and stone shelves collect soap residue every day. Universal Badreiniger cuts through those calcium-rich deposits in minutes, letting you reset the whole room without harsh scrubbing.\u003c\/p\u003e\n\u003ch2\u003eWhat Universal Badreiniger Does\u003c\/h2\u003e\n\u003cp\u003eUniversal Badreiniger is a mildly alkaline cleaner for bathroom stone, ceramic, glass, enamel, and metal fixtures. At pH 9.5 it breaks the bond between fatty soap scum, light limescale, and surface tension so dirt lifts on contact. Non-aggressive surfactants suspend the loosened grime until you wipe it away, leaving no film and no need for neutralising rinses on most substrates.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished vanity tops in \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e: ready-to-use 1:0 for daily wipe-down.\u003c\/li\u003e\n\u003cli\u003eRough shower floors in \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e: ready-to-use 1:0 after each shower.\u003c\/li\u003e\n\u003cli\u003eWall cladding in \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic tiles\u003c\/a\u003e: ready-to-use 1:0 twice weekly.\u003c\/li\u003e\n\u003cli\u003eGlazed \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e sinks showing toothpaste haze: ready-to-use 1:0 on demand.\u003c\/li\u003e\n\u003cli\u003eDaily-maintenance touch-ups: ready-to-use 1:0, then follow the guide at \u003ca href=\"\/en-ie\/pages\/problem-daily-maintenance\"\u003edaily maintenance\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eHold the trigger 15 cm from the surface and spray a uniform film (≈10 ml\/m²).\u003c\/li\u003e\n\u003cli\u003eWait 60-120 seconds for the alkaline agents to loosen residues.\u003c\/li\u003e\n\u003cli\u003eWipe with a damp microfiber cloth or sponge, applying light pressure.\u003c\/li\u003e\n\u003cli\u003eRinse with clear water on food-contact or high-polish stone; towel-dry fixtures for streak-free shine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne 500 ml bottle covers 50 m²; a full litre cleans 100 m². The surface is dry immediately; no curing time.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula is safe on acid-sensitive stones because its pH stays below the etch threshold while remaining strong enough to cut bath grime. You can use it confidently on \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, granite, porcelain, and ceramic tiles. It also works on medium-porosity stones such as marble and limestone-test first. Do not use on freshly waxed cotto or other coatings sensitive to alkaline products.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy mineral crusts or builder’s dirt, step up to \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e. For long-term stain protection after cleaning porous stone, seal with \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-heat shower walls with warm water; the 40 °C surface temperature speeds chemical activity by about 20 %.\u003c\/li\u003e\n\u003cli\u003eBuff polished chrome dry; any remaining micro-film evaporates, preventing drip marks for up to 48 hours.\u003c\/li\u003e\n\u003cli\u003eInclude Universal Badreiniger in a weekly \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e cycle to maintain sealer performance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880124461388,"sku":"306-11-EU","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/306_8d90d222-2d91-4233-908a-6dbf5e5be4dc.webp?v=1772467457"},{"product_id":"lithofin-anti-slip","title":"Lithofin Anti-Slip","description":"\u003cp\u003eRain-slick shoes on a polished hotel lobby, soapy water on a marble bathroom, or chlorinated splashes around a pool can all turn beautiful floors into hazards. Lithofin Anti-Slip steps in to raise the wet coefficient of friction without changing the look of your surface.\u003c\/p\u003e\n\u003ch2\u003eWhat Anti-Slip Does\u003c\/h2\u003e\n\u003cp\u003eAnti-Slip is an acidic safety treatment for polished and glazed surfaces. At pH ≈ 2.3 it reacts with silica or calcium carbonate, creating an invisible micro-texture 0.5-2 µm deep that increases grip up to 50 %. Because the gel is ready to use, every litre treats 5-15 m², depending on porosity.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished marble bathroom floors - undiluted, 80-100 ml\/m², 5-8 min contact\u003c\/li\u003e\n\u003cli\u003eWet-area \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e tiles around showers - undiluted, 70-90 ml\/m², 10 min\u003c\/li\u003e\n\u003cli\u003eGranite pool surrounds - undiluted, 150-200 ml\/m², 15 min\u003c\/li\u003e\n\u003cli\u003eCommercial ceramic entrance lobbies - undiluted, 70-90 ml\/m², 12 min\u003c\/li\u003e\n\u003cli\u003eOutdoor stone steps facing \u003ca href=\"\/en-ie\/pages\/problem-outdoor-cleaning\"\u003eoutdoor-cleaning\u003c\/a\u003e challenges - undiluted, 120 ml\/m², 10 min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the surface with \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003e\u003cstrong\u003eMN Wash \u0026amp; Clean\u003c\/strong\u003e\u003c\/a\u003e and rinse; floor must be perfectly free of soap film.\u003c\/li\u003e\n\u003cli\u003eApply Anti-Slip undiluted with a sponge or mop at the rate specified above.\u003c\/li\u003e\n\u003cli\u003eSpread evenly and keep wet; allow 5-15 minutes depending on stone hardness.\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly until the runoff water reaches neutral pH (≈7) and remove residue.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-15 m²\/L. Surface is walk-safe immediately after rinsing; full chemical reaction stabilises in 24 h. Reapply every 12-24 months in heavy traffic zones.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eAnti-Slip performs excellently on glazed ceramic, \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, and dense stones such as \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e. It is also effective on acid-sensitive stones like \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e and limestone when contact does not exceed 8 minutes, preventing etching. The controlled acid action forms micro-pits smaller than dust particles, so gloss loss is minimal. Do not use on already textured, honed, or surfaces where any dulling is unacceptable.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine cleaning after treatment, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For ongoing maintenance in ceramic restrooms, switch to \u003ca href=\"\/en-ie\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. Anti-Slip adds safety; the other products keep the floor clean so the texture remains effective.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTest a 20×20 cm patch first; measure gloss before and after to confirm acceptable change.\u003c\/li\u003e\n\u003cli\u003eFor \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, neutralise with a 1 % sodium bicarbonate rinse; this halts acid activity instantly.\u003c\/li\u003e\n\u003cli\u003eRecord application date; re-treat when slip-test pendulum value drops below R10 to maintain compliance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880124657996,"sku":"199-11-B","price":60.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/199.webp?v=1772467423"},{"product_id":"lithofin-cement-away","title":"Lithofin CEMENT-AWAY","description":"\u003cp\u003eYour newly tiled granite foyer still shows a dull grey veil; cement residue locks in dust and spoils the shine. CEMENT-AWAY strips that film in minutes, leaving the surface factory-fresh.\u003c\/p\u003e\n\u003ch2\u003eWhat CEMENT-AWAY Does\u003c\/h2\u003e\n\u003cp\u003eCEMENT-AWAY is an acidic cleaner for acid-resistant stone and ceramic tile. With a working pH of 1.3 it dissolves calcium silicate and calcium carbonate bonds that hold cement haze, mortar splashes, and limescale. Sulfamic and phosphoric acids release deposits in under 3 minutes, allowing you to rinse them away without etching hard substrates rated Mohs 5-7.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite lobby after grouting - use undiluted on heavy haze (1 L covers 3 m²) \u003ca href=\"\/en-ie\/pages\/problem-cement-residue\"\u003ecement-residue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePorcelain shower walls with limescale rings - dilute 1:3 (250 ml\/m²)\u003c\/li\u003e\n\u003cli\u003eSlate patio after pointing work - dilute 1:5 (150 ml\/m²) \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eConcrete garage floor with mortar drips - pre-wet, apply 1:3 dilution \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCotto kitchen tiles before sealing - quick wipe at 1:10, rinse immediately \u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet the surface until the stone stops darkening.\u003c\/li\u003e\n\u003cli\u003eSpread CEMENT-AWAY with a sponge, brush, or low-pressure sprayer at the chosen dilution.\u003c\/li\u003e\n\u003cli\u003eLet it react 2-3 minutes; keep the area wet and agitate with a stiff brush.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, then squeegee or wet-vac.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 3-10 m²\/L depending on deposit thickness. No drying phase; neutralisation is complete after the double rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eCEMENT-AWAY excels on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e, and pre-wetted \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e because their acid-resistant matrices (Mohs 5-7) withstand pH 1.3 without etching. On high-porosity \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e or \u003ca href=\"\/en-ie\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e you dilute 1:5 and rinse fast to prevent colour change. Do not use on marble, limestone, travertine, terrazzo, or any calcareous surface.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor invisible stain protection after cleaning, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eLithofin MN Stain-Stop\u003c\/a\u003e. For ongoing spill resistance on glazed tiles, choose \u003ca href=\"\/en-ie\/products\/lithofin-kf-protective-impregnator\"\u003eLithofin KF Protective Impregnator\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways test a 0.25 m² patch; reaction fizz stops when the cement bond is gone.\u003c\/li\u003e\n\u003cli\u003eWarm water (25 °C) speeds dissolution by 20 %-handy in winter site work.\u003c\/li\u003e\n\u003cli\u003eNeutralise runoff with 5 % bicarbonate to protect adjacent lawns.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880124887372,"sku":"010-11-B","price":16.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880124920140,"sku":"010-11-B","price":61.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583796556,"sku":"010-11-B-DOOS-10","price":149.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/010.webp?v=1772467268"},{"product_id":"lithofin-resin-ex","title":"Lithofin Resin-EX","description":"\u003cp\u003eEpoxy grout haze turns your freshly tiled shower and the adjoining rough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e floor matt and sticky. Paint splatters on the adjoining \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e step refuse to budge. Resin-EX restores the original surface in one application, even on vertical wall tiles.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Resin-EX Does\u003c\/h2\u003e\n\u003cp\u003eResin-EX is a neutral, solvent-rich cleaner for ceramic, porcelain and natural stone. A balanced mix of glycol and ketone solvents (pH≈7, VOC 720 g\/L) penetrates cured epoxy up to 3 µm thick and softens it within 15 minutes at 20 °C. The liquefied resin emulsifies on contact with water, so you rinse everything away without leaving an oily film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFresh epoxy haze on shower \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e tiles - use neat, 200 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eOld joint residues on rough \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e pavers - use neat, 200 ml\/m².\u003c\/li\u003e\n  \u003cli\u003ePaint overspray on polished \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e window sills - use neat, 200 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eGraffiti shadow on exterior \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e bricks - use neat, 200 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eShake the bottle, pour Resin-EX undiluted onto a cloth or white pad.\u003c\/li\u003e\n  \u003cli\u003eSpread evenly; keep the surface wet for 10-20 min, cover with foil if needed.\u003c\/li\u003e\n  \u003cli\u003eScrub with a nylon brush until the resin turns into a slurry.\u003c\/li\u003e\n  \u003cli\u003eRinse twice with plenty of clean water and wipe dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 5 m² per litre on smooth stone and tiles. Surfaces can be walked on as soon as they are dry to the touch, typically after 30 minutes at 20 °C.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on dense stones such as \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e; good on acid-sensitive materials like \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e because the neutral solvent mix will not etch the 3-Mohs surface. Always test on polished sandstone or quartz-composite. Do not use on plastics, freshly lacquered wood, or any material that can swell in strong solvents.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor daily wipe-downs after you have removed the epoxy, use \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eUniversal Wash \u0026amp; Clean\u003c\/a\u003e. For long-term stain protection once the surface is perfectly clean, apply Universal Stain-Stop at 10 m²\/L.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the area to 25 °C with a fan heater first; penetration speed doubles with every 10 °C rise.\u003c\/li\u003e\n  \u003cli\u003eCover vertical applications with plastic wrap to prevent evaporation and maintain full activity.\u003c\/li\u003e\n  \u003cli\u003eNeutralise lingering solvent odour by washing once with Universal Wash \u0026amp; Clean 1:20; it drops VOC readings below 50 ppm in 5 minutes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880125215052,"sku":"037-11-B","price":48.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/037.webp?v=1772467286"},{"product_id":"lithofin-rust-ex","title":"Lithofin Rust-EX","description":"\u003cp\u003eRust rings under balcony chairs, orange streaks on a kitchen worktop, and iron-rich water spots on porcelain tiles all ruin an otherwise perfect finish. One ready-to-use application of Lithofin Rust-EX eliminates the oxidation before it sets permanently.\u003c\/p\u003e\n\u003ch2\u003eWhat Rust-EX Does\u003c\/h2\u003e\n\u003cp\u003eRust-EX is an acidic cleaner for natural stone, ceramic, and porcelain. At pH 1.5 it converts insoluble ferric oxide into water-soluble ferrous salts. A built-in indicator turns the liquid violet within 2 minutes, confirming the reaction. Wetting agents carry the solution 2-3 mm into porous stone, so the rust lifts out without heavy scrubbing.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished marble vanity with a metal perfume-tray ring - apply undiluted.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003eGranite\u003c\/a\u003e patio showing iron spots from lawn furniture - apply undiluted.\u003c\/li\u003e\n\u003cli\u003eBathroom \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e tiles stained by iron-bearing well water - apply undiluted.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003eSandstone\u003c\/a\u003e facade with old steel anchor marks - pre-wet, then apply undiluted.\u003c\/li\u003e\n\u003cli\u003eAny surface listed on \u003ca href=\"\/en-ie\/pages\/problem-rust-stains\"\u003erust-stain\u003c\/a\u003e guide - spot treat undiluted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMask adjacent acid-sensitive areas and pre-wet very porous stone. Using a brush or dropper, place Rust-EX directly on the rust until it is fully covered.\u003c\/li\u003e\n\u003cli\u003eWait 5-15 min; the liquid turns deep violet. Agitate lightly with a nylon brush if the stain is heavy.\u003c\/li\u003e\n\u003cli\u003eRinse twice with plenty of clean water, then neutralise residues with a mild alkaline cleaner if required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTypical coverage: 50 ml removes a 5 cm diameter rust ring; actual use varies. Surface can be resealed after 2 h drying.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent results on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e because these acid-resistant materials (Mohs 5-7) tolerate the low pH without etching. Good performance on sandstone, concrete, terracotta, cotto, and glass-mosaic when pre-wetted to slow acid penetration. Do not use on large areas of polished marble; restrict to spots and rinse immediately.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor ongoing stain protection after rust removal, use \u003ca href=\"\/en-ie\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For grease, wax, or general soiling before sealing, clean with \u003ca href=\"\/en-ie\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways neutralise with an alkaline cleaner to stop residual acid from re-activating rust - prevents shadowing.\u003c\/li\u003e\n\u003cli\u003eOn very porous stone, repeat a short 5 min application instead of one long dwell to avoid edge darkening.\u003c\/li\u003e\n\u003cli\u003eSeal cleaned areas within 24 h to block moisture that can carry new iron particles back into the pore structure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880125411660,"sku":"038-21-B","price":23.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/038.webp?v=1772467289"},{"product_id":"lithofin-wax-off","title":"Lithofin WAX-OFF","description":"\u003cp\u003eYour 40 m² terracotta kitchen floor looks dull and patchy after years of wax build-up. Old layers trap dirt and block new treatments. WAX-OFF strips every coat in one pass, giving you a clean base for fresh wax or \u003ca href=\"\/en-ie\/products\/lithofin-tc-impregnator\"\u003eimpregnation\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003eWhat WAX-OFF Does\u003c\/h2\u003e\n\u003cp\u003eWAX-OFF is an alkaline solvent-boosted cleaner for waxed stone and tile. With a pH of 11.2 it splits the long-chain polymers in carnauba, acrylic, and paraffin waxes, then emulsifies the residue for easy rinsing. A 10-20 minute dwell breaks layers up to 2 mm thick; 1 L covers 3-10 m² depending on wax thickness.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eCotto floor before re-waxing - apply undiluted, 100 ml\/m² \u003ca href=\"\/en-ie\/pages\/problem-wax-residue\"\u003ewax-residue\u003c\/a\u003e\n\u003c\/li\u003e\n  \u003cli\u003eTerracotta hallway prior to \u003ca href=\"\/en-ie\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e - undiluted, 120 ml\/m²\u003c\/li\u003e\n  \u003cli\u003ePolished marble bathroom with polish rings - undiluted, 110 ml\/m²\u003c\/li\u003e\n  \u003cli\u003eRough granite patio with adhesive smears - undiluted, 180 ml\/m²\u003c\/li\u003e\n  \u003cli\u003eCeramic showroom tiles with slip polish build-up - undiluted, 90 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eBrush or vacuum loose grit, then flood the surface with WAX-OFF undiluted (150 ml\/m²).\u003c\/li\u003e\n  \u003cli\u003eSpread evenly with a mop or white pad; allow 10-20 minutes without drying.\u003c\/li\u003e\n  \u003cli\u003eScrub manually or with a machine at 150 rpm using a green pad.\u003c\/li\u003e\n  \u003cli\u003eVacuum slurry, rinse twice with clean water, and towel dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 3-10 m²\/L. Dry to walk on after final rinse in 30 minutes; wait 24 hours before sealing or waxing.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eTerracotta, \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003ecotto\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, and other acid-sensitive stones suffer no etching because the alkaline formula contains no free acids. Dense materials like \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e release surface wax with one pass. Highly porous \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e may need two applications. Do not use on plastic, painted, or rubber surfaces; solvents may soften them.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep stripping choose WAX-OFF. For traditional satin finishes apply Lithofin TC Classic Primer and TC Classic Wax after stripping. For invisible protection without shine, finish with \u003ca href=\"\/en-ie\/products\/lithofin-tc-impregnator\"\u003eLithofin TC Impregnator\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the room to 20 °C; higher temperature speeds solvent action and cuts dwell time by 5 minutes.\u003c\/li\u003e\n  \u003cli\u003eUse a wet vacuum instead of mopping: it removes 95 % of slurry in one pass, preventing residue rings.\u003c\/li\u003e\n  \u003cli\u003eRinse with 500 ml\/m² of clean water; insufficient rinsing leaves alkaline traces that hinder new sealers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880125509964,"sku":"018-11-B","price":23.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880125542732,"sku":"018-11-B","price":77.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583894860,"sku":"018-11-B-DOOS-10","price":207.72,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/018.webp?v=1772467277"},{"product_id":"lithofin-fugex","title":"Lithofin FUGEX Resin Grout Residue Remover","description":"\u003cp\u003eYour newly laid patio still shows stubborn grey haze where joint mortar smeared onto the porcelain tiles. Household detergents glide over it, scrubbing only spreads the film. Universal FUGEX cuts through that mortar residue in minutes and rinses away without etching the tile surface.\u003c\/p\u003e\n\u003ch2\u003eWhat FUGEX Does\u003c\/h2\u003e\n\u003cp\u003eFUGEX is an alkaline gel cleaner for ceramic, porcelain, and other acid-sensitive surfaces. With a pH of 11.5 it breaks the cementitious bond in joint mortar residues while surfactants lift greasy dirt. The thixotropic gel (viscosity 4,500 mPa·s) clings to vertical joints, giving the active ingredients a 3-minute window to dissolve particles up to 50 µm thick.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFresh mortar haze on patio \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e: dilute 1 : 10.\u003c\/li\u003e\n\u003cli\u003eEpoxy streaks on indoor \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e shower walls: use 1 : 5.\u003c\/li\u003e\n\u003cli\u003eDeep-set grime in textured \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen flooring: 1 : 5.\u003c\/li\u003e\n\u003cli\u003eChalky runoff on balcony \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e pavers after winter: 1 : 10.\u003c\/li\u003e\n\u003cli\u003eAnnual spring \u003ca href=\"\/en-ie\/pages\/problem-outdoor-cleaning\"\u003eoutdoor cleaning\u003c\/a\u003e routine for clinker steps: 1 : 10.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare a 1 : 5 or 1 : 10 solution in a bucket and wet the surface. PT5M\u003c\/li\u003e\n\u003cli\u003eSpread with a white pad or sponge, massaging the joints. PT5M\u003c\/li\u003e\n\u003cli\u003eAllow the gel to act for 3 minutes; do not let it dry. PT3M\u003c\/li\u003e\n\u003cli\u003eRinse thoroughly with clean water until no foam remains. PT5M\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage coverage is 15 m²\/L on 300 × 300 mm tiles with 3 mm joints. The surface is traffic-ready immediately after rinsing; no drying time required.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eFUGEX performs best on \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, granite, porcelain, ceramic, glass mosaic, concrete, and clinker because these materials rate Mohs 5-7 and resist the alkaline pH, so the gel cleans without etching or colour shift. Do not use on surfaces that are not resistant to gel-based cleaners, such as untreated wood or polished aluminium.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor greasy kitchen film on stone, use \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-cleaner\"\u003eKF Grout Cleaner\u003c\/a\u003e. For long-term joint protection after cleaning, finish with \u003ca href=\"\/en-ie\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm water (30 °C) speeds reaction by 20 % on epoxy smears.\u003c\/li\u003e\n\u003cli\u003eAgitate with a nylon brush; mechanical action doubles removal rate on rough granite.\u003c\/li\u003e\n\u003cli\u003eFinish with a low-pressure rinse-10 L\/min flow prevents re-depositing fines in joints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"5 liter","offer_id":56880125641036,"sku":"057-11-B","price":144.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter","offer_id":56880125673804,"sku":"057-11-B","price":40.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401583927628,"sku":"057-11-B-DOOS-10","price":368.1,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/057.webp?v=1772467305"},{"product_id":"lithofin-abra-clean","title":"Lithofin Abra-CLEAN","description":"\u003cp\u003eYour polished kitchen granite darkens under built-up grease, and the porcelain hallway tiles hold scuff marks that daily mopping ignores. Abra-CLEAN from the PRO line cuts through that stubborn layer in minutes, restoring the original colour and slip resistance on hard stone and ceramic surfaces.\u003c\/p\u003e\n\u003ch2\u003eWhat Abra-CLEAN Does\u003c\/h2\u003e\n\u003cp\u003eAbra-CLEAN is a mildly alkaline cleaner (pH 7.5) with micro-abrasive particles for hard stone and ceramic. The 6 Mohs abrasive powder lifts ingrained dirt mechanically while the alkaline surfactants dissolve oils and soap films. Together they dislodge deposits that standard neutral cleaners leave behind, yet remain safe for acid-resistant substrates.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGrease-soaked \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops - use undiluted, 30 ml\/m².\u003c\/li\u003e\n\u003cli\u003eTraffic lanes on rough ceramic factory floors - 1 : 5 (200 ml\/L) for heavy soil.\u003c\/li\u003e\n\u003cli\u003eScuff removal on glazed \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e lobby tiles - 1 : 10 (100 ml\/L).\u003c\/li\u003e\n\u003cli\u003ePost-renovation dust on kitchen \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e splashbacks - 1 : 20 (50 ml\/L).\u003c\/li\u003e\n\u003cli\u003eAnnual \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e of exterior granite steps - use undiluted, scrub and rinse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle, then dilute as required in a plastic bucket.\u003c\/li\u003e\n\u003cli\u003eSpread with a white pad, sponge, or scrubbing machine, wetting 2 m² at a time.\u003c\/li\u003e\n\u003cli\u003eWork the surface for 2-3 minutes until the slurry turns grey.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clear water or wet-vac extract; wipe dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 5-20 m² per litre depending on porosity. No drying time-areas are ready for use immediately after the final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eOn dense \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, 7 Mohs hardness resists the 6 Mohs abrasive, so no scratching occurs. Porcelain and ceramic tiles share similar hardness and acid resistance, letting the alkaline formula clean without etching. Do not use on soft, glossy plastics or lacquered wood that can scratch.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine maintenance after deep cleaning, use Lithofin PRO Care (pH 8, gentle surfactants). For long-term stain repellence on worktops, apply Lithofin PRO Protect after the surface is perfectly clean.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-wet highly porous stone to reduce product consumption by up to 30 %.\u003c\/li\u003e\n\u003cli\u003eUse a melamine pad on porcelain; its finer structure increases contact time and improves removal of heel marks.\u003c\/li\u003e\n\u003cli\u003eNeutralise rinsing water to pH 7 before discharge to protect stainless floor drains.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"500ml","offer_id":56880125772108,"sku":"085-21-B","price":19.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880125804876,"sku":"085-21-B","price":69.95,"currency_code":"EUR","in_stock":false},{"title":"500ml (doos van 12)","offer_id":57401584091468,"sku":"085-21-B-DOOS-12","price":213.58,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/085.webp?v=1772467308"},{"product_id":"lithofin-asr","title":"Lithofin ASR","description":"\u003cp\u003eYour commercial kitchen floor shows black grease lanes, the factory walkway is coated with forklift rubber, and ordinary detergents leave a sticky film. ASR breaks that film in minutes so you rinse away every trace on the first pass.\u003c\/p\u003e\n\u003ch2\u003eWhat ASR Does\u003c\/h2\u003e\n\u003cp\u003eASR is a high-alkaline cleaner for hard tile and stone. With a pH 12.5 surfactant matrix, it splits fatty acids, lifts mineral grime, and suspends soot so you mop or vacuum it away. At 100 m² per litre the formula dissolves grease layers up to 2 mm thick within 5 minutes, yet remains safe for acid-sensitive bluestone because no acids are present.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGranite kitchen counters after a fry session - dilute 1:10. See \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eFactory slate floor with forklift tyre marks - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eOutdoor porcelain pavers stained by barbecue fat - use neat (undiluted).\u003c\/li\u003e\n\u003cli\u003eConcrete garage slab with engine oil spill - dilute 1:5 and scrub machine.\u003c\/li\u003e\n\u003cli\u003eRestaurant ceramic wall tiles showing airborne grease - dilute 1:10. Problem details at \u003ca href=\"\/en-ie\/pages\/problem-oil-grease\"\u003eoil-grease issue page\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet alkaline-tolerant surface with clean water.\u003c\/li\u003e\n\u003cli\u003eApply ASR at the chosen dilution using mop, sponge, or single-disk scrubber - 100 m²\/L equals 10-20 ml per m².\u003c\/li\u003e\n\u003cli\u003eAllow 5 minutes contact; keep wet by agitating every minute.\u003c\/li\u003e\n\u003cli\u003eVacuum or mop off, then rinse twice with water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 100 m²\/L on smooth stone, 60 m²\/L on rough textures. No drying time; area is traffic-ready after final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eOn dense stones such as \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e tiles the alkaline base penetrates low porosity (0.5-1.5 %) without etching. Porous sandstone cleans evenly once pre-wetted, while polished granite resists streaking thanks to Mohs 7 hardness. Do not use on surfaces that craze or fade in pH \u0026gt; 11, for example aluminium trim, waxed wood, or dyed concrete toppers.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stripping acrylic wax films use \u003ca href=\"\/en-ie\/products\/lithofin-wax-off\"\u003eLithofin PRO WAX-OFF\u003c\/a\u003e. For pinpoint oil spots that have already penetrated into stone pores, switch to Lithofin PRO FLECK-OFF. ASR handles wide-area grease and soot; the others target localised residues.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the solution to 30 °C to cut dwell time by 40 % on winter floors.\u003c\/li\u003e\n\u003cli\u003eOn vertical ceramic walls start at the bottom; gravity keeps the surface wet for the full 5 minutes.\u003c\/li\u003e\n\u003cli\u003eNeutralise any run-off onto marble thresholds immediately with fresh water to avoid alkaline dulling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880125903180,"sku":"041-11-B","price":36.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880125935948,"sku":"041-11-B","price":100.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter -viskös-","offer_id":56880125968716,"sku":"041-11-B","price":101.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401584320844,"sku":"041-11-B-DOOS-10","price":330.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/041.webp?v=1772467293"},{"product_id":"lithofin-composite-cleaner","title":"Lithofin Composite Cleaner","description":"\u003cp\u003eYour polished kitchen island in quartz composite shows greasy handprints and dull traffic lanes. Daily spray cleaners smear instead of lifting the film. PRO Composietreiniger restores the crisp, factory-fresh sheen in one pass.\u003c\/p\u003e\n\u003ch2\u003eWhat PRO Composietreiniger Does\u003c\/h2\u003e\n\u003cp\u003ePRO Composietreiniger is a mildly alkaline cleaner for quartz-composite and other acid-resistant materials. At pH 9.1 it breaks the electrostatic bond between oil, soap scum, and the resin matrix without attacking the surface. Solvent boosters dissolve polymerised grease in 60 seconds, allowing you to wipe away residues in a single lift.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuartz-composite worktops after heavy cooking sessions - use undiluted, 100 ml\/m².\u003c\/li\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e vanity tops to remove cosmetic build-up - undiluted, 80 ml\/m².\u003c\/li\u003e\n\u003cli\u003eLarge-format \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e floor tiles with stubborn shoe marks - undiluted, 90 ml\/m².\u003c\/li\u003e\n\u003cli\u003eOutdoor \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e BBQ counters before impregnation - undiluted, 100 ml\/m².\u003c\/li\u003e\n\u003cli\u003eRough \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e balcony slabs for spring clean-up - undiluted, 90 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle for 15 seconds and pour undiluted cleaner onto a lint-free cloth or white pad.\u003c\/li\u003e\n\u003cli\u003eSpread evenly over 1-2 m², keep the surface wet for 2 minutes.\u003c\/li\u003e\n\u003cli\u003eAgitate stubborn spots with a soft nylon brush for 30 seconds.\u003c\/li\u003e\n\u003cli\u003eWipe off dissolved dirt with a damp microfiber, then dry with a second cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 10-15 m²\/L; no formal drying time, but allow the surface to air-dry for 5 minutes before traffic or applying Lithofin PRO Impregnator.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formulation glides on quartz-composite, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e, and \u003ca href=\"\/en-ie\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Low-porosity minerals (Mohs 6-7) resist the mild alkalinity, so the cleaner lifts soil without etching. Do not use on waxed wood, painted metal, or any surface labelled unsuitable for solvent-based products.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term stain resistance after cleaning, apply Lithofin PRO Impregnator. For routine wipe-downs between deep cleans, switch to Lithofin PRO Care Products.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 20 °C before cleaning; reaction speed doubles compared with 10 °C.\u003c\/li\u003e\n\u003cli\u003eFlush the cloth in clean water every 5 m² to avoid redepositing loosened dirt.\u003c\/li\u003e\n\u003cli\u003eFollow with impregnation within 24 h; pores remain open, giving up to 15 % deeper penetration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880127017292,"sku":"339-44-B","price":112.95,"currency_code":"EUR","in_stock":false}]},{"product_id":"lithofin-lev","title":"Lithofin LEV","description":"\u003cp\u003eEpoxy smears on newly laid \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e tiles slow down your installer, and oily handprints threaten the bond of the upcoming sealer. LEV removes every trace of grease in seconds, leaving the surface dry and receptive for impregnation.\u003c\/p\u003e\n\u003ch2\u003eWhat LEV Does\u003c\/h2\u003e\n\u003cp\u003eLEV is a neutral, solvent-based cleaner for natural stone, ceramics, and concrete. The pH-7.0 formula breaks van der Waals bonds in oils, waxes, silicone and fresh adhesive residues, lifting them into solution without adding water. Fast evaporation (95 % gone in 4 minutes at 20 °C) leaves no film that could block subsequent treatments.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDegreasing a polished kitchen \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e worktop before sealing - use undiluted (1 : 0).\u003c\/li\u003e\n\u003cli\u003eQuick cleaning of rough basalt on a building site - use undiluted, wipe after 3 minutes.\u003c\/li\u003e\n\u003cli\u003eRemoving silicone haze from \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e mosaics in a shower - use undiluted, agitate with white pad.\u003c\/li\u003e\n\u003cli\u003eSurface prep for \u003ca href=\"\/en-ie\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e impregnation on concrete pavers - use undiluted, allow 5 minutes.\u003c\/li\u003e\n\u003cli\u003eSpot removal of oily footprints during \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e of a shopping mall floor - spray, wipe immediately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSpray LEV undiluted onto the dry surface at 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eAllow 2-5 minutes dwell; keep wet by re-mist if needed.\u003c\/li\u003e\n\u003cli\u003eWork with a microfiber cloth or white nylon pad until the residue loosens.\u003c\/li\u003e\n\u003cli\u003eWipe off dissolved contaminants; rinse with clear water only if a sealer is not applied immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre covers 10-15 m², depending on texture. The surface is ready for the next treatment as soon as it looks dry, typically after 5 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eLEV scores excellent on low-porosity stones like \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e, and ceramic because the solvent carrier cannot etch or swell these substrates. Neutral chemistry avoids the acid bite that damages Mohs-3 stones, so even acid-sensitive marble tolerates short contact-always test first. Do not use on solvent-sensitive plastics, varnished wood, or acrylic bathtubs.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep mineral dirt, choose MN Power-Clean described under \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e. For long-term oil and water resistance after the surface is dry, finish with an impregnator from the \u003ca href=\"\/en-ie\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e section.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the room to 18-25 °C; higher temperature accelerates solvent action by up to 30 %.\u003c\/li\u003e\n\u003cli\u003eFold your cloth into quarters and switch sides after 0.5 m² to avoid re-depositing grease.\u003c\/li\u003e\n\u003cli\u003eBefore applying a solvent-based sealer, run a fingertip test: if no smudge appears, the stone is residue-free and ready.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880127115596,"sku":"342-11-B","price":36.95,"currency_code":"EUR","in_stock":false},{"title":"30 liter","offer_id":56880127148364,"sku":"342-11-B","price":398.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401584386380,"sku":"342-11-B-DOOS-10","price":329.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/342.webp?v=1772467473"},{"product_id":"lithofin-fve","title":"Lithofin FVE","description":"\u003cp\u003eYour new granite kitchen island looks dull and shows splash marks after every meal prep. One thin coat of Lithofin FVE brings out the deep grey tone, then seals the stone so tomato sauce and oil no longer penetrate. \u003c\/p\u003e\n\u003ch2\u003eWhat FVE Does\u003c\/h2\u003e\n\u003cp\u003eFVE is a neutral, solvent-based impregnator for porous stone, concrete, and unglazed ceramics. Silane-siloxane molecules (pH ≈ 7) bond under the surface, forming a 0.4 µm vapor-permeable network that repels water and oil for years. Pigment-wetting carriers intensify colour by up to 20 % without altering surface gloss.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRough \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite worktops\u003c\/a\u003e - apply neat; no dilution.\u003c\/li\u003e\n\u003cli\u003ePorous \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone patio\u003c\/a\u003e slabs after power-washing; use neat.\u003c\/li\u003e\n\u003cli\u003eIndoor \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e floors needing darker tone; use neat.\u003c\/li\u003e\n\u003cli\u003eUnglazed \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e tiles in a bathroom; use neat.\u003c\/li\u003e\n\u003cli\u003eDeepen colour on slate fireplace surrounds; use neat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake can for 30 s, then pour into a paint tray.\u003c\/li\u003e\n\u003cli\u003eRoll or spray evenly at 25 ml\/m² (undiluted).\u003c\/li\u003e\n\u003cli\u003eAfter 5 min, wipe off all excess with a lint-free cloth.\u003c\/li\u003e\n\u003cli\u003eLet the surface stand dust-free for 2 h before traffic.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage is 40 m² per litre on medium-porosity stone. Full curing occurs after 24 h; no separate drying time is required.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eFVE performs best on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, concrete, cotto, and \u003ca href=\"\/en-ie\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e. The neutral chemistry will not etch silica-rich minerals, while the solvent carrier penetrates low-porosity stone. Do not use on polished surfaces or acid-sensitive stones such as marble, limestone, or travertine.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine alkaline cleaning before impregnation, use \u003ca href=\"\/en-ie\/pages\/problem-oil-grease\"\u003ePRO Clean\u003c\/a\u003e. For invisible protection with no colour change, use PRO Stain-Stop. FVE sits between them: it darkens the tone and adds water-oil repellence in one step.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways test FVE on an off-cut; colour increase varies by up to 5 ΔE units.\u003c\/li\u003e\n\u003cli\u003eTwo light coats outperform one heavy coat by 15 % in oil repellency (ASTM C1028).\u003c\/li\u003e\n\u003cli\u003eRebuff with a white pad after 30 min to avoid streaks on dense basalt.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880127639884,"sku":"045-11-B","price":108.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880127672652,"sku":"045-11-B","price":332.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401584681292,"sku":"045-11-B-DOOS-10","price":978.48,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/045.webp?v=1772467299"},{"product_id":"lithofin-nanotop","title":"Lithofin NanoTOP","description":"\u003cp\u003eYour freshly installed marble island keeps picking up oil rings after every family dinner. Lithofin NanoTOP stops those stains before they start, sealing the pores in less than ten minutes and curing within 24 hours.\u003c\/p\u003e\n\u003ch2\u003eWhat NanoTOP Does\u003c\/h2\u003e\n\u003cp\u003eNanoTOP is a neutral solvent-based impregnator for natural stone. Nano-sized fluoropolymers bond below the surface, lowering water absorption by 95 % and oil uptake by 90 %. The 6.9 pH formula leaves calcium carbonate unharmed while forming a vapour-permeable barrier only 50 nm thick.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKitchen countertops in \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eOutdoor grills on \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eRestaurant tables made of \u003ca href=\"\/en-ie\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eHigh-traffic bar tops in \u003ca href=\"\/en-ie\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003ePreventing \u003ca href=\"\/en-ie\/pages\/problem-oil-grease\"\u003eoil-grease\u003c\/a\u003e marks on concrete buffet stations - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle, then flood the surface with undiluted product using a lint-free cloth or low-pressure sprayer.\u003c\/li\u003e\n\u003cli\u003eSpread evenly; keep the stone wet for 3 minutes so the 0.05 µm particles penetrate.\u003c\/li\u003e\n\u003cli\u003eAfter 5 minutes, wipe off all excess with a dry microfiber pad until the surface feels dry to the touch.\u003c\/li\u003e\n\u003cli\u003eBuff once more after 30 minutes to remove any haze.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 20 m²\/L on all finishes. Light foot traffic is possible after 2 hours; full moisture exposure only after 24 hours of curing.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eNanoTOP excels on \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, limestone, sandstone, slate, bluestone, basalt, concrete, and terrazzo because the neutral pH avoids etching and the nano layer adapts to porosity from 0.3 % (granite) up to 18 % (sandstone). Good results are seen on porcelain and ceramic after a spot test. Do not use on non-absorbent glass or already coated surfaces.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine weekly cleaning, use Lithofin PRO Clean; its alkaline pH 10 removes food residue without stripping NanoTOP. For pre-installation impregnation of very porous stone, use Lithofin PRO Stain-Stop; it delivers deeper penetration but less surface sheen.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the stone to 20 °C before application; penetration increases by 15 % compared to 10 °C.\u003c\/li\u003e\n\u003cli\u003eTwo thin coats on highly porous sandstone give better uniformity than one heavy coat because solvent flash-off stays below 2 g\/m².\u003c\/li\u003e\n\u003cli\u003eReapply after aggressive steam cleaning; tests show gloss retention drops by 10 % after 50 steam cycles.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880127770956,"sku":"025-11-B","price":80.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880127803724,"sku":"025-11-B","price":238.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401584746828,"sku":"025-11-B-DOOS-10","price":725.76,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/025.webp?v=1772467280"},{"product_id":"lithofin-protector-composite","title":"Lithofin Protector for (quartz) composite and artificial stone","description":"\u003cp\u003eYour quartz-composite kitchen island shows dark rings every time red wine sits for longer than a few minutes. Bathrooms with matt porcelain vanities pick up greasy fingerprints that refuse to wash off. Protector 345 stops the stains before they start.\u003c\/p\u003e\n\u003ch2\u003eWhat Protector Does\u003c\/h2\u003e\n\u003cp\u003eProtector is a neutral solvent-based impregnator for low-porosity engineered and natural stone. Its pH≈7 carrier drives 2-3 % fluoropolymer solids 1-2 mm into the surface, lining the micro-capillaries with a 115° water-contact-angle film that blocks oil and dye molecules for up to 24 months.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFreshly installed \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e worktops - apply undiluted (1:0) before first use.\u003c\/li\u003e\n\u003cli\u003eHigh-traffic hotel vanities made from \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e - one flood coat undiluted, repeat after 10 min.\u003c\/li\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e reception desks exposed to coffee - single wipe-on coat, undiluted.\u003c\/li\u003e\n\u003cli\u003eTextured \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e splash-backs that trap grease - spray undiluted, back-roll immediately.\u003c\/li\u003e\n\u003cli\u003eConcrete countertops requiring hydrophobic protection - liberal undiluted application followed by wet-on-wet top-up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the surface is dry (\u0026lt;12 % moisture) and clean; pre-wash with Lithofin PRO Clean \u0026amp; Care and wait 24 h.\u003c\/li\u003e\n\u003cli\u003eSaturate a lint-free cloth or low-pressure sprayer with Protector and spread a wet film; consumption 35 ml\/m².\u003c\/li\u003e\n\u003cli\u003eAfter 10 min, redistribute excess using a new cloth until the surface looks even and streak-free.\u003c\/li\u003e\n\u003cli\u003eLet air-dry 60 min; avoid water, oil, or foot traffic for the full 24-h cure.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTypical coverage: 25-40 m²\/L on polished quartz, 15 m²\/L on textured concrete. Touch-dry in 1 h, fully cured in 24 h at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eProtector shows excellent results on \u003ca href=\"\/en-ie\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e because its low-viscosity carrier matches the material’s Mohs 7, low-porosity matrix. It also bonds well to acid-resistant \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and high-porosity \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e without altering gloss. Do not use on waxed, acrylic-coated, or any surface sensitive to solvents.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine neutral cleaning after sealing, use Lithofin PRO Clean \u0026amp; Care. For deeper impregnation of very absorbent natural stone, use Lithofin PRO Stain-Stop.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the room to 18-25 °C; higher temperature halves cure time by accelerating solvent flash-off.\u003c\/li\u003e\n\u003cli\u003eAlways double-wipe polished slabs; leaving residue can cut stain repellency by 30 %.\u003c\/li\u003e\n\u003cli\u003eRe-test after one year: place a water droplet for 10 min; if the stone darkens, reapply Protector.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"250ml","offer_id":56880128000332,"sku":"345-11-B","price":31.95,"currency_code":"EUR","in_stock":false},{"title":"1 Liter","offer_id":56880128033100,"sku":"345-11-B","price":107.95,"currency_code":"EUR","in_stock":false},{"title":"250ml (doos van 12)","offer_id":57401584779596,"sku":"345-11-B-DOOS-12","price":337.78,"currency_code":"EUR","in_stock":false},{"title":"1 Liter (doos van 10)","offer_id":57401584812364,"sku":"345-11-B-DOOS-10","price":965.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/345.webp?v=1772467476"}],"url":"https:\/\/ixstone.com\/en-ie\/collections\/ceramics.oembed","provider":"adh23084u","version":"1.0","type":"link"}