{"product_id":"lithofin-sticker-remover","title":"Lithofin Sticker Remover","description":"\u003cp\u003ePrice tags on a new window pane, tape residue on a \u003ca href=\"\/en-ie\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e countertop, or a stubborn label on your toolbox-each leaves a sticky mess that regular detergent will not touch. Sticker Remover 308 breaks down those adhesives within seconds, so you wipe the surface clean without scraping.\u003c\/p\u003e\n\u003ch2\u003eWhat Sticker Remover Does\u003c\/h2\u003e\n\u003cp\u003eSticker Remover is a neutral, solvent-based specialist cleaner for hard surfaces. Aromatic-free hydrocarbons penetrate the adhesive layer, reducing bond strength by 80 % in under 60 seconds. The non-aqueous formula evaporates fully, leaving no film and registering pH 7 once residues are gone.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrice labels on \u003ca href=\"\/en-ie\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e tiles - use neat, 5 ml per label.\u003c\/li\u003e\n\u003cli\u003eVinyl tape on stainless metal panels - use neat, 10 ml per 10 cm strip.\u003c\/li\u003e\n\u003cli\u003eDecals on shopfront glass - use neat, 50 ml per A4 sticker.\u003c\/li\u003e\n\u003cli\u003eMasking-tape bleed on \u003ca href=\"\/en-ie\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e window sills - spot test, then apply neat, 5 ml per spot.\u003c\/li\u003e\n\u003cli\u003ePackaging glue on \u003ca href=\"\/en-ie\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e floors before sealing - use neat, 40 ml per m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDrip or spray Sticker Remover directly on the adhesive until the area glistens.\u003c\/li\u003e\n\u003cli\u003eWait 30-120 seconds; scrape gently with a plastic spatula if needed.\u003c\/li\u003e\n\u003cli\u003eWipe off liquefied adhesive with an absorbent cloth.\u003c\/li\u003e\n\u003cli\u003eRinse stone or ceramic surfaces with a neutral cleaner if further treatment follows.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage usage is 0.05 L per m²; 1 L treats about 20 m² of scattered residues. Surface is dry to the touch immediately after wiping.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe solvent mix does not contain acids or alkalis, so it will not etch acid-sensitive stones such as \u003ca href=\"\/en-ie\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e. Low surface tension lets the product float on dense materials like \u003ca href=\"\/en-ie\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e and \u003ca href=\"\/en-ie\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, preventing shadowing. Always test on polymers or lacquered wood; do not use on acrylic glass or painted plastics prone to solvent attack.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor coloured marker stains, use \u003ca href=\"\/en-ie\/pages\/problem-general-cleaning\"\u003eHOME Graffitireiniger\u003c\/a\u003e. For greasy kitchen build-up, switch to HOME Krachtreiniger. Sticker Remover stays the pick whenever the word “adhesive” appears in the problem description.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eScore large stickers with a cutter; more edge area speeds penetration by 30 %.\u003c\/li\u003e\n\u003cli\u003eWarm the surface to 30 °C with a heat gun to cut dwell time in half.\u003c\/li\u003e\n\u003cli\u003eFollow with Lithofin MN Power-Clean before sealing porous stone to avoid trapping solvent traces.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880130425164,"sku":"308-03-B","price":20.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/308.webp?v=1772467461","url":"https:\/\/ixstone.com\/en-ie\/products\/lithofin-sticker-remover","provider":"adh23084u","version":"1.0","type":"link"}