{"title":"Lithofin KF - Ceramics \u0026 Tiles","description":"\u003cp\u003eProducts for ceramic tiles, porcelain tiles and sanitary ware.\u003c\/p\u003e","products":[{"product_id":"lithofin-kf-intensive-cleaner","title":"Lithofin KF Intensive Cleaner","description":"\u003cp\u003eYour kitchen porcelain floor shows greasy traffic lanes, and the grout in your shower traps soap scum that regular detergent cannot shift. KF Intensive Cleaner (article 180) breaks down this build-up within minutes, restoring the tile’s original slip resistance and colour.\u003c\/p\u003e\n\u003ch2\u003eWhat KF Intensive Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eKF Intensive Cleaner is an alkaline cleaner for ceramic, porcelain, cotto, and clinker. With a pH of 11.3, strong surfactants cut polymer wax, grease, and micro-grime that lodge in pores smaller than 0.2 µm. At 1:5 dilution it removes stubborn fat films; at 1:20 it lifts everyday residue without harming grout lines.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnglazed \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain kitchen floor\u003c\/a\u003e: 1:10 for quarterly deep clean.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/stone-cotto\"\u003eCotto foyer\u003c\/a\u003e with old wax: 1:5 or undiluted strip, then rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eClinker basement\u003c\/a\u003e with oil spots: 1:5 scrub via machine.\u003c\/li\u003e\n\u003cli\u003eBathroom tiles showing cloudy film (\u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003egeneral cleaning issue\u003c\/a\u003e): 1:20 mop and rinse.\u003c\/li\u003e\n\u003cli\u003eTerracotta patio with water-based sealer residue (\u003ca href=\"\/en-mt\/pages\/problem-wax-residue\"\u003ewax residue\u003c\/a\u003e): 1:5 brush application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare solution: pour water first, then add the cleaner to reach 1:5-1:20, or use neat on heavy wax.\u003c\/li\u003e\n\u003cli\u003eDistribute with a mop, sponge, or scrubbing machine, keeping surface wet for 5-10 min.\u003c\/li\u003e\n\u003cli\u003eAgitate with white pad or scrubber until the slurry darkens.\u003c\/li\u003e\n\u003cli\u003eVacuum or mop up, rinse twice with clear water.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-20 m²\/L depending on dilution. No drying time; floor is walkable after final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe alkaline formula will not etch acid-sensitive stones, yet it excels on dense tiles. Excellent results on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Good on marble, limestone, and other calcareous stones because the pH stays below 12, but \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e users often prefer MN Power-Clean. Do not use on rare surfaces expressly labelled “alkali-sensitive”.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor daily wipe care use \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For long-term stain protection after deep cleaning, apply \u003ca href=\"\/en-mt\/products\/lithofin-kf-protective-impregnator\"\u003eKF Protective Impregnator\u003c\/a\u003e. Choose MN Power-Clean for acid-sensitive natural stone that needs stronger chelation.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm (35 °C) solution speeds soil release by 20 %-ideal in winter.\u003c\/li\u003e\n\u003cli\u003ePre-wet very porous cotto so the cleaner stays on the surface and works evenly.\u003c\/li\u003e\n\u003cli\u003eAlways rinse twice; leaving alkaline residue can attract dirt 30 % faster.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880119021900,"sku":"180-11-B","price":18.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880119054668,"sku":"180-11-B","price":64.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582354764,"sku":"180-11-B-DOOS-10","price":168.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/180.webp?v=1772467395"},{"product_id":"lithofin-kf-ceramic-clean","title":"Lithofin KF Ceramic-Clean","description":"\u003cp\u003eSoap scum clouds your shower wall, and hard-water spots creep across the ceramic floor. Five minutes later, Ceramic-Clean strips the limescale and leaves the tile streak-free.\u003c\/p\u003e\n\u003ch2\u003eWhat Ceramic-Clean Does\u003c\/h2\u003e\n\u003cp\u003eCeramic-Clean is an acidic cleaner for ceramic and porcelain surfaces. Its pH 2.0 solution converts calcium carbonate into water-soluble salts, liberating deposits in 5-10 minutes. Surfactants cut through soap and body oil so you rinse everything away at once.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShower walls in a \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e bathroom - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003ePorcelain floor around a swimming pool - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eGlass mosaic backsplash with stubborn \u003ca href=\"\/en-mt\/pages\/problem-limescale\"\u003elimescale\u003c\/a\u003e - use undiluted.\u003c\/li\u003e\n\u003cli\u003eGranite vanity top free of etching risk - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eBasalt patio after winter salt spray - dilute 1:5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMix 1 part Ceramic-Clean with 5-10 parts water in a spray bottle. Use neat for white crusts.\u003c\/li\u003e\n\u003cli\u003eWet the surface, then spread with a sponge or cloth; rate 30 ml\/m².\u003c\/li\u003e\n\u003cli\u003eWait 5-10 minutes; scrub lightly with a white pad.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water; wipe dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage reaches 10-30 m²\/L on tiles and 15-25 m²\/L on glass. No curing time; you can walk on the floor immediately.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e because their acid-resistant structure (Mohs ≥5) prevents etching. It also works on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Do not use on marble, limestone, travertine, or bluestone.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor everyday wipe-down, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For black spots in joints, pick KF Mildew-Away. Ceramic-Clean tackles mineral buildup that those neutral products cannot dissolve.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeat speeds reaction: apply after running the shower so the tile sits at 30 °C.\u003c\/li\u003e\n\u003cli\u003eSqueegee daily; you cut limescale load by 80 % and need Ceramic-Clean only monthly.\u003c\/li\u003e\n\u003cli\u003eUse a soft brush on grout; the acid loosens residue without weakening cement joints.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119152972,"sku":"111-11-B","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/111.webp?v=1772467324"},{"product_id":"lithofin-kf-cement-residue-remover","title":"Lithofin KF Cement Residue Remover","description":"\u003cp\u003eYour newly laid porcelain floor looks dull because a grey film clings to each tile joint. Ordinary detergents bounce off the hardened grout. Lithofin KF Cement Residue Remover strips away that cement haze in minutes, leaving the showroom finish you expected.\u003c\/p\u003e\n\n\u003ch2\u003eWhat KF Remover Does\u003c\/h2\u003e\n\u003cp\u003eKF Remover is an \u003cstrong\u003eacidic cleaner for ceramic and porcelain tiles\u003c\/strong\u003e. At pH 1.5 it dissolves Portland-cement binders and calcium carbonate, breaking the crystalline bond that causes haze. Sulfamic acid at 120 g\/L converts insoluble cement particles into water-soluble salts that rinse away without scrubbing.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePost-grouting haze on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain kitchen floors\u003c\/a\u003e - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eStubborn cement residue on \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic bathroom walls\u003c\/a\u003e - dilute 1:3.\u003c\/li\u003e\n\u003cli\u003eLimescale rings on shower trays - apply neat on a sponge.\u003c\/li\u003e\n\u003cli\u003eBuilders’ dust film on \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete balcony slabs\u003c\/a\u003e - use undiluted after pre-wetting.\u003c\/li\u003e\n\u003cli\u003ePre-sealing clean of terracotta before \u003ca href=\"\/en-mt\/products\/lithofin-kf-protective-impregnator\"\u003eKF Protective Impregnator\u003c\/a\u003e - dilute 1:5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet the surface until uniformly damp, avoiding puddles.\u003c\/li\u003e\n\u003cli\u003eSpread the 1:3-1:5 solution with a mop or white pad; use a brush for joints. Time: 5 min.\u003c\/li\u003e\n\u003cli\u003eAgitate once more; do not let the solution dry. Time: 3 min.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, then neutralise with \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e at 1:200. Time: 2 min.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 5-15 m² \/L depending on dilution. No drying time; the floor is ready for foot traffic after final rinse.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and clinker because their Mohs ≥5, acid-resistant matrices tolerate pH 1.5 without etching. It performs well on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, concrete, terracotta, cotto and \u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e when the surface is pre-wet to limit penetration. Do not use on marble, limestone, travertine, bluestone or metal fittings.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine maintenance of glazed tiles, use KF Conditioning Cleaner. For sealing absorbent cotto after the initial clean, use KF Protective Impregnator. For cement haze on natural stone, switch to MN Builders’ Clean.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork in 5 m² zones to keep the acid active and easy to rinse.\u003c\/li\u003e\n\u003cli\u003eAlways neutralise with a mild alkaline wash to stop latent acid from dulling grout joints.\u003c\/li\u003e\n\u003cli\u003eWarm water (25 °C) accelerates chemical reaction by approx. 30 %, reducing dwell time.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880119218508,"sku":"110-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880119251276,"sku":"110-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582420300,"sku":"110-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/110.webp?v=1772467321"},{"product_id":"lithofin-kf-cleartop","title":"Lithofin KF ClearTop","description":"\u003cp\u003eSoap film dulls your shower tiles, kettle-hot limescale spots your kitchen splashback, and everyday cleaners bounce off the buildup. KF ClearTop cuts through the mineral crust in minutes, restoring the crisp sheen on your ceramic wall and floor tiles.\u003c\/p\u003e\n\u003ch2\u003eWhat ClearTop Does\u003c\/h2\u003e\n\u003cp\u003eClearTop is an acidic cleaner for ceramic, porcelain, and other acid-resistant surfaces. With a working pH of 1.8 it attacks calcium carbonate deposits, rust, and soap scum, converting them into water-soluble salts that rinse away. A 40 m²\/L coverage and three dilution options (1:10, 1:5, or neat) let you match strength to soil level while keeping material consumption measured in exact 25 ml\/m².\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBathroom ceramic tiles with limescale - dilute 1:10, see \u003ca href=\"\/en-mt\/pages\/problem-limescale\"\u003elimescale guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePorcelain kitchen splashbacks after months of cooking steam - dilute 1:5.\u003c\/li\u003e\n\u003cli\u003eUnglazed \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e hallway floors before sealing - use undiluted.\u003c\/li\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops stained by hard-water rings - dilute 1:10.\u003c\/li\u003e\n\u003cli\u003eAnnual \u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003edeep cleaning\u003c\/a\u003e of pool-side glass-mosaic - use 1:5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare the mix: 1:10 for light film, 1:5 for stubborn scale, undiluted for cement haze. \u003ctime\u003ePT1M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpread with a mop, sponge, or microfiber cloth, making sure 50 ml\/m² wets vertical joints. \u003ctime\u003ePT2M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003cli\u003eAllow the product to fizz for 3-5 minutes; keep the surface wet, scrub with a white pad if needed. \u003ctime\u003ePT5M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water until pH-neutral runoff, then wipe dry. \u003ctime\u003ePT5M\u003c\/time\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre treats up to 40 m². No drying time is required; surfaces are traffic-ready immediately after the final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eClearTop excels on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, ceramic, and \u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e because their Mohs ≥6 hardness and acid resistance prevent etching while the low porosity lets the solution lift deposits quickly. It is also effective on basalt, slate, granite, and other acid-resistant stones, though always perform a patch test. Do not use on marble, limestone, terrazzo, or any surface labelled acid-sensitive.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine streak-free maintenance after deep cleaning, use Lithofin KF Care. For long-term stain protection of countertops or shower walls, finish with Lithofin KF Stain-Stop. ClearTop stays your pick whenever you see whitish scale or rust marks.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 25 °C with shower water first; reaction speed doubles compared to 18 °C.\u003c\/li\u003e\n\u003cli\u003eWork in 3 m² sections so the acid stays active and never dries out, preventing salt residue.\u003c\/li\u003e\n\u003cli\u003eNeutralise runoff that reaches concrete grout joints with a quick pass of diluted KF Care (pH 9) for balanced surface chemistry.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119480652,"sku":"092-03-B","price":14.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/092.webp?v=1772467311"},{"product_id":"lithofin-care-kit-ceramic-tiles","title":"Lithofin KF Care Set for Ceramic Tiles","description":"\u003cp\u003eYour kitchen porcelain tiles show greasy traffic lanes while the bathroom grout carries soap build-up. The KF Maintenance Set removes both daily film and stubborn grime in one kit, restoring slip-resistant texture without dulling the glaze.\u003c\/p\u003e\n\u003ch2\u003eWhat Maintenance Set Does\u003c\/h2\u003e\n\u003cp\u003eMaintenance Set is an alkaline care-kit for ceramic and porcelain. The cleaner component works at pH 10.5, breaking the fatty acid chains that bind grease and polymer residues, while the microfiber pad lifts particles down to 5 µm. A 1:5 solution dissolves weeks of oil in 10 minutes; undiluted it attacks lime soap within 3 minutes.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKitchen porcelain floor with greasy spots - dilute 1:5, see \u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003egeneral cleaning\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eDaily wipe of glazed ceramic splashback - dilute 1:10\u003c\/li\u003e\n\u003cli\u003eShower wall suffering soap scum - use undiluted, rinse after 5 min\u003c\/li\u003e\n\u003cli\u003eHallway \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e tiles after muddy weather - dilute 1:5\u003c\/li\u003e\n\u003cli\u003ePeriodic deep scrub on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e grout joints - undiluted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVacuum loose grit, then mix cleaner: 100 ml in 1 L water (1:10) for maintenance or 200 ml in 1 L (1:5) for mid-soil.\u003c\/li\u003e\n\u003cli\u003eSpread with a microfiber mop, keep surface wet 5 minutes.\u003c\/li\u003e\n\u003cli\u003eAgitate with the supplied pad; on heavy soil pour undiluted product and scrub immediately.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, then dry with a lint-free cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eConsumption averages 10 ml\/m²; one litre treats about 100 m² in maintenance mode. No drying time-floor is traffic-ready after final rinse.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula is safe on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, and low-porosity stones such as \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e or \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e because the alkaline cleaner contains no free caustic soda, so it will not etch acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e during short contact. Do not use on waxed wood or other surfaces incompatible with alkaline products.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor grout haze removal or mineral deposits, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-intensive-cleaner\"\u003eKF Intensive Cleaner\u003c\/a\u003e. For streak-free no-rinse daily mopping on polished tiles, switch to KF Maintenance Cleaner.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm water (40 °C) increases cleaning power by 25 %-handy on oily kitchen floors.\u003c\/li\u003e\n\u003cli\u003eUse a white pad on \u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e to avoid scratches.\u003c\/li\u003e\n\u003cli\u003eAlways rinse twice; residual alkalinity can attract new dirt 30 % faster.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119578956,"sku":"217-11-B","price":27.95,"currency_code":"EUR","in_stock":false}]},{"product_id":"lithofin-kf-protective-impregnator","title":"Lithofin KF Protective Impregnator","description":"\u003cp\u003eYour brand-new unglazed kitchen floor shows greasy footprints within days. Bathroom porcelain darkens around the vanity after every shampoo spill. One liberal coat of Lithofin KF Protective Impregnator stops these stains before they start.\u003c\/p\u003e\n\u003ch2\u003eWhat Protective Impregnator Does\u003c\/h2\u003e\n\u003cp\u003eProtective Impregnator is a neutral solvent-based impregnator for porous ceramic and porcelain tiles. Silane molecules (pH≈7) bond inside pores ≤0.1 µm, forming a water-contact angle of ≥110° and an oil-repellency rating of 5. Coverage reaches 10-30 m²\/L, giving 3-5 years of invisible barrier against red wine, coffee and bathroom cosmetics.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUnglazed porcelain kitchen floor after grout haze removal - Ready to use (RTU) 50 ml\/m² \u003ca href=\"\/en-mt\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-traffic ceramic lobby tiles - RTU 60 ml\/m² \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePolished marble vanity splash zone - RTU 90 ml\/m² \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e alt finish\u003c\/li\u003e\n\u003cli\u003eClinker mudroom floor before winter - RTU 70 ml\/m² \u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure surface is clean, fully dry (24 h) and 10-25 °C.\u003c\/li\u003e\n\u003cli\u003ePour RTU product into paint tray, saturate microfiber roller, then spread 50-100 ml\/m² evenly.\u003c\/li\u003e\n\u003cli\u003eAfter 10 minutes, redistribute pools with a soft sponge to avoid gloss spots.\u003c\/li\u003e\n\u003cli\u003eAfter 30 minutes, buff residue with a white pad; allow 24 h before wet use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage coverage: 15 m²\/L on porcelain, 12 m²\/L on cotto. Full curing: 24 h; light traffic after 2 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e (Mohs 7, low porosity) and \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e (Mohs 5). Good on \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-cotto\"\u003ecotto\u003c\/a\u003e and \u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. The neutral formula will not etch acid-sensitive terrazzo, yet still sinks deep into high-porosity concrete. Do not use on glazed tiles or any surface that will receive wax later.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing of protected floors, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For a pre-treatment that strips construction dirt before impregnation, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-intensive-cleaner\"\u003eKF Intensive Cleaner\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTest absorbency: a 5 cm water droplet should darken the tile within 30 s; if it beads, impregnation is unnecessary.\u003c\/li\u003e\n\u003cli\u003eWarm the room to ≥18 °C to speed solvent evaporation and maximise 24 h cure time.\u003c\/li\u003e\n\u003cli\u003eTwo thin coats give better stain block on very porous cotto than one heavy coat because capillary spaces fill evenly.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119677260,"sku":"183-11-B","price":49.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/183.webp?v=1772467401"},{"product_id":"lithofin-kf-grout-protector","title":"Lithofin KF Grout Protector","description":"\u003cp\u003eYour shower grout absorbs shampoo, soap, and coloured water every day; in six months it looks darker than the tiles. Grout Protector stops this by sealing each joint with a water- and oil-repellent barrier that lasts up to two years.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Grout Protector Does\u003c\/h2\u003e\n\u003cp\u003eGrout Protector is a neutral impregnator for cement-based grout on ceramic, porcelain and natural-stone installations. The ready-to-use fluoropolymer solution (pH 7.8) penetrates to a depth of 1-2 mm, lines each pore, and reduces water absorption by 95 % within 24 h. Spills bead on the surface, giving you a 10-minute window to wipe away coffee, shampoo, or cooking oil before they stain.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew bathroom grout, 100 % ready to use, after 7-day cure.\u003c\/li\u003e\n\u003cli\u003eKitchen backsplash joints, 100 %, one coat for 3 mm lines.\u003c\/li\u003e\n\u003cli\u003eShower floor mosaic (\u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e), 100 %, two coats for heavy splash zones.\u003c\/li\u003e\n\u003cli\u003eOutdoor porcelain patio grout, 100 %, apply on a dry, 10 °C-25 °C day.\u003c\/li\u003e\n\u003cli\u003eLimestone floor joints after \u003ca href=\"\/en-mt\/products\/lithofin-kf-grout-cleaner\"\u003eKF Grout Cleaner\u003c\/a\u003e, 100 %.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean joints with KF Grout Cleaner, rinse, then air-dry 24 h till the grout shows \u0026lt;2 % residual moisture.\u003c\/li\u003e\n\u003cli\u003eShake bottle, fill a fine brush or applicator pen, and draw a continuous bead along each joint.\u003c\/li\u003e\n\u003cli\u003eAfter 5 minutes, remove surplus from tile edges with a damp microfibre cloth.\u003c\/li\u003e\n\u003cli\u003eFor shower floors, repeat step 2 after 15 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eConsumption 50-100 ml\/m² depending on joint width and depth. Surface is walk-safe after 1 h; full resistance builds in 12-24 h.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formulation bonds to all absorbent cementitious joints between \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, and other stones. Because it is neutral, it will not etch acid-sensitive stones such as limestone. Do not use on epoxy grout, damp joints, or silicone seals.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep cleaning before protection, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-grout-cleaner\"\u003eKF Grout Cleaner\u003c\/a\u003e. For weekly maintenance that refreshes the protective layer, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMask tile edges with 5 mm tape on polished marble; saves 10 min of buffing residue.\u003c\/li\u003e\n\u003cli\u003eWarm the room to 18 °C: viscosity drops 15 %, penetration improves.\u003c\/li\u003e\n\u003cli\u003eLog reapplication in your phone calendar; UV and cleaners reduce lifespan to 12 months in showers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119808332,"sku":"116-21-B","price":28.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/116.webp?v=1772467333"},{"product_id":"lithofin-care-kit-ceramic-worktops","title":"Lithofin KF Care Set for Ceramic Countertops (Compact)","description":"\u003cp\u003eYour polished ceramic island looks dull after weeks of cooking splashes and coffee rings. Daily wiping leaves smears, and abrasive powders threaten the glaze. Lithofin KF Maintenance Set restores the crisp, streak-free finish in your kitchen within minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat Maintenance Set Does\u003c\/h2\u003e\n\u003cp\u003eMaintenance Set is a mildly alkaline cleaner and conditioner kit for glazed ceramic and sintered \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e worktops. The  pH 9.5 spray dissolves grease, tannin, and limescale film, while the  pH 8.5 wipe-on polish lays down a nanometre-thin protective layer that resists new deposits for up to 72 h. Each 500 ml bottle treats 300 m² at 1:20 dilution, cutting average kitchen upkeep time by 40 %.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDaily wipe-down of a ceramic hob at 1:40.\u003c\/li\u003e\n\u003cli\u003ePost-meal degreasing of a porcelain breakfast bar at 1:20.\u003c\/li\u003e\n\u003cli\u003eWeekly refresh of a utility-room splashback at 1:30.\u003c\/li\u003e\n\u003cli\u003eQuick spot-clean of coffee stains on a \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e table at full strength.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake cleaner, spray 20 ml per m² evenly over the surface.\u003c\/li\u003e\n\u003cli\u003eSpread with a microfibre pad, allow 2 minutes contact.\u003c\/li\u003e\n\u003cli\u003eRinse with 100 ml clean water per m² and wipe dry.\u003c\/li\u003e\n\u003cli\u003eApply polish undiluted, buff after 5 minutes with a dry cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 30-50 m² per application. Surfaces are food-safe when dry; curing time 10 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula bonds to fired silica matrices, making it ideal for glazed ceramic (Mohs 5) and dense \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e (Mohs 7). Alkali reserves lift acidic residues without etching, and the low-viscosity carrier penetrates medium porosity tiles evenly. Do not use on unglazed limestone or marble.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep descaling after grouting, use Lithofin KF Intensive Cleaner. For sealing unglazed quarry tiles, choose Lithofin KF Protector. Maintenance Set remains the go-to for day-to-day hygiene.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 25 °C before spraying; solubility of grease rises by 15 % per 10 °C.\u003c\/li\u003e\n\u003cli\u003eUse distilled water for the rinse in hard-water areas to avoid 0.1 g\/m² lime spots.\u003c\/li\u003e\n\u003cli\u003eBuff with a white pad; darker pads may contain oxides that leave grey streaks.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880119906636,"sku":"204-11-B","price":32.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/204.webp?v=1772467430"},{"product_id":"lithofin-kf-conditioning-cleaner","title":"Lithofin KF Conditioning Cleaner","description":"\u003cp\u003eYour porcelain kitchen floor streaks after every mop, and the grout lines in the shower feel slightly tacky. Conditioning Cleaner ends that cycle by leaving tiles and grout film-free with a single wipe.\u003c\/p\u003e\n\u003ch2\u003eWhat Conditioning Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eConditioning Cleaner is a pH-neutral maintenance cleaner for porcelain, ceramic, and clinker tiles. At pH 7.5 it suspends grease molecules and soap residues, then encapsulates them so you lift away the dirt without leaving surfactant films. Added care additives form an invisible, non-slip sheen that repels new soil for up to 24 hours.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePorcelain kitchen floor daily mop - dilute 1-2 capfuls in 5 L water. \u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003eDaily-maintenance\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCeramic bathroom walls after shower - same 1-2 capfuls per 5 L; wipe and leave, no rinse.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eClinker\u003c\/a\u003e hallway traffic film - 2 capfuls per 5 L for heavier dirt.\u003c\/li\u003e\n\u003cli\u003eGlass-mosaic splashback - 1 capful per 5 L for streak-free gloss.\u003c\/li\u003e\n\u003cli\u003eQuartz-composite vanity top - 1 capful per 5 L; spray bottle works for spot cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eAdd 5 L warm water to a clean bucket, then pour in 1-2 capfuls (10-20 ml).\u003c\/li\u003e\n\u003cli\u003eSoak a flat microfiber mop, wring until damp, and work the floor in 5 m² sections.\u003c\/li\u003e\n\u003cli\u003eRinse mop in the same solution; no clear water rinse required.\u003c\/li\u003e\n\u003cli\u003eAllow the surface to air dry; you can walk on it immediately.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 100-200 m² per litre of concentrate, equal to 5-10 ml \/ m². Drying time: none.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral formula glides over acid-sensitive marble yet cleans hard \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e equally well. Low surfactant content prevents film on \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e and \u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e. Because no free alkali or acid is present, you avoid etching on limestone or colour shift on \u003ca href=\"\/en-mt\/pages\/stone-clinker\"\u003eclinker\u003c\/a\u003e. Safe on every tile surface; do not use as a stone degreaser - choose KF Intensive Cleaner for that.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor monthly deep cleaning of wax or polymer build-up, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-intensive-cleaner\"\u003eKF Intensive Cleaner\u003c\/a\u003e. For sealing grout lines after a renovation, apply \u003ca href=\"\/en-mt\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e. Conditioning Cleaner remains your day-to-day solution.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSwitch the mop water after 50 m²; suspended dirt lowers coverage by 20 % if left in solution.\u003c\/li\u003e\n\u003cli\u003eUse distilled water in hard-water areas (\u0026gt;15 °dH) to avoid calcium streaks.\u003c\/li\u003e\n\u003cli\u003eAdd warm (40 °C) water in winter; higher temperature boosts surfactant action by 15 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880120037708,"sku":"182-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880120070476,"sku":"182-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582551372,"sku":"182-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/182.webp?v=1772467398"},{"product_id":"lithofin-care-kit-bathroom","title":"Lithofin Care Set for Bathrooms","description":"\u003cp\u003eSoap film clouds your shower glass, while a faint lime rim clings to the marble sill. You need one kit that keeps all bathroom surfaces-acid-sensitive or not-spotless. The Lithofin KF Bathroom Maintenance Set solves both daily wipe-downs and periodic descaling in one box.\u003c\/p\u003e\n\n\u003ch2\u003eWhat KF Bathroom Set Does\u003c\/h2\u003e\n\u003cp\u003eKF Bathroom Set is a dual-action neutral and mildly acidic cleaner kit for mixed bathroom surfaces. The pH 7.5 daily spray lifts body oil, soap, and cosmetic residue within 60 seconds, while the pH 2.5 weekly spray dissolves limescale by converting CaCO₃ to water-soluble Ca²⁺ salts. A 500 ml bottle covers up to 12 m² when misted at 40 ml\/m².\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble vanity tops after morning use - spray undiluted, wipe immediately. \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003e\/pages\/stone-marble\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGlass mosaic shower walls with hard-water spots - spray acidic bottle, leave 2 min, rinse. Dilution 1:1 for stubborn scale. \u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003e\/pages\/stone-glass-mosaic\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCeramic floor tiles in guest baths for daily hygiene - neutral bottle, no rinse, use 30 ml\/m². \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003e\/pages\/stone-ceramic\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLimestone window sills in wet rooms for weekly refresh - neutral bottle only, undiluted. \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003e\/pages\/stone-limestone\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGeneral bathroom \u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e between deep cleans.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the chosen bottle for 5 seconds and set sprayer to “fine mist”.\u003c\/li\u003e\n\u003cli\u003eSpray a contiguous 1 m² area from 20 cm distance using 8 ml product.\u003c\/li\u003e\n\u003cli\u003eSpread with a soft sponge; allow 60 s contact for neutral cleaner or 2 min for acidic cleaner.\u003c\/li\u003e\n\u003cli\u003eRinse with 0.5 L clean water or wipe dry with a microfiber cloth.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eEach bottle treats 10-12 m². Surfaces are touch-dry in 5 minutes at 20 °C; the acidic cleaner is food-safe after a final rinse.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral formula is safe on acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e (Mohs 3) and \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e because it matches their natural pH and will not etch. The acidic spray is reserved for acid-resistant granite, porcelain, and glass mosaic, attacking mineral scale without affecting their Mohs 6-7 hardness. Do not use the acidic bottle on polished marble, terrazzo, or other calcareous stones.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor monthly deep \u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003egeneral-cleaning\u003c\/a\u003e, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e at 1:5. For heavy limescale on granite, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-cement-residue-remover\"\u003eKF Cement Residue Remover\u003c\/a\u003e. The KF Bathroom Set remains your first line for quick upkeep.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the surface to 25 °C with shower water before spraying; higher temperature doubles reaction speed.\u003c\/li\u003e\n\u003cli\u003eSqueegee glass after each shower to cut weekly acidic cleaner use by 40 %.\u003c\/li\u003e\n\u003cli\u003eSwitch cloths every 5 m²; saturated fibers redeposit soap residue.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120201548,"sku":"205-11-B","price":34.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/205.webp?v=1772467432"},{"product_id":"lithofin-kf-hyclean","title":"Lithofin KF HyClean for Ceramic Countertops","description":"\u003cp\u003eYour ceramic hob shows greasy fingerprints and dried sauce splashes after every meal. Kitchen worktops collect oil mist and coffee rings. Hyclean ends this build-up in one pass, leaving the surface food-safe and streak-free.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Hyclean Does\u003c\/h2\u003e\n\u003cp\u003eHyclean is a neutral cleaner for glazed ceramic and \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e surfaces. The pH 9.5 solution breaks the bond between fats, sugars and the low-porosity surface within 60 seconds, so you wipe them away rather than spread them. A quaternary ammonium compound at 0.25 % inhibits 99.9 % of common kitchen bacteria in 5 minutes while leaving no visible film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDaily wipe-down of a ceramic hob - spray undiluted (1 : 1) to remove cooking grease.\u003c\/li\u003e\n  \u003cli\u003eDegreasing a porcelain sink after raw meat prep - spray undiluted (1 : 1) for 5 minutes contact time.\u003c\/li\u003e\n  \u003cli\u003eRefreshing a ceramic splashback with dried tomato sauce - spray undiluted (1 : 1) and loosen residue with a microfiber pad.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003eGeneral cleaning\u003c\/a\u003e of large polished-porcelain tiles - mist 40 ml\/m² (1 : 1) and wipe with a flat mop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eHold the trigger 20 cm from the surface and spray an even film (≈40 ml\/m²).\u003c\/li\u003e\n  \u003cli\u003eLeave Hyclean to act for exactly 5 minutes; keep the area wet.\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp microfiber cloth, working in overlapping circles.\u003c\/li\u003e\n  \u003cli\u003eRinse the cloth under warm water and give the surface a final pass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre treats 30-35 m², enough for 120 standard kitchen worktop cleanings. No drying time is needed; you can place food directly once the surface feels touch-dry.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse Hyclean on \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e tiles, fine-porcelain slabs and vitrified mosaics. The neutral pH avoids etching, and the low 0.4 % solvent content will not soften factory sealants. Do not use on acid-sensitive natural stone or unsealed wood.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy lime scale on taps, use Lithofin KF Bathroom Cleaner. For deep grease in grout joints, switch to Lithofin KF Intensive Cleaner. Hyclean covers the everyday wipe-down between those two tasks.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the surface to 30 °C by running hot water first; the cleaner works 20 % faster.\u003c\/li\u003e\n  \u003cli\u003eUse two cloths: one for the first wipe, one for the rinse, to avoid redepositing oils.\u003c\/li\u003e\n  \u003cli\u003eSwitch nozzles to the fine-mist setting on vertical splashbacks; runoff drops by 60 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120267084,"sku":"129-11-EU","price":20.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/129.webp?v=1772467336"},{"product_id":"lithofin-kf-hyclean-spray","title":"Lithofin KF HyClean for Ceramic Countertops","description":"\u003cp\u003eYour ceramic hob shows greasy fingerprints and dried sauce splashes after every meal. Kitchen worktops collect oil mist and coffee rings. Hyclean ends this build-up in one pass, leaving the surface food-safe and streak-free.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Hyclean Does\u003c\/h2\u003e\n\u003cp\u003eHyclean is a neutral cleaner for glazed ceramic and \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e surfaces. The pH 9.5 solution breaks the bond between fats, sugars and the low-porosity surface within 60 seconds, so you wipe them away rather than spread them. A quaternary ammonium compound at 0.25 % inhibits 99.9 % of common kitchen bacteria in 5 minutes while leaving no visible film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDaily wipe-down of a ceramic hob - spray undiluted (1 : 1) to remove cooking grease.\u003c\/li\u003e\n  \u003cli\u003eDegreasing a porcelain sink after raw meat prep - spray undiluted (1 : 1) for 5 minutes contact time.\u003c\/li\u003e\n  \u003cli\u003eRefreshing a ceramic splashback with dried tomato sauce - spray undiluted (1 : 1) and loosen residue with a microfiber pad.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003eGeneral cleaning\u003c\/a\u003e of large polished-porcelain tiles - mist 40 ml\/m² (1 : 1) and wipe with a flat mop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eHold the trigger 20 cm from the surface and spray an even film (≈40 ml\/m²).\u003c\/li\u003e\n  \u003cli\u003eLeave Hyclean to act for exactly 5 minutes; keep the area wet.\u003c\/li\u003e\n  \u003cli\u003eWipe with a damp microfiber cloth, working in overlapping circles.\u003c\/li\u003e\n  \u003cli\u003eRinse the cloth under warm water and give the surface a final pass.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre treats 30-35 m², enough for 120 standard kitchen worktop cleanings. No drying time is needed; you can place food directly once the surface feels touch-dry.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse Hyclean on \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e tiles, fine-porcelain slabs and vitrified mosaics. The neutral pH avoids etching, and the low 0.4 % solvent content will not soften factory sealants. Do not use on acid-sensitive natural stone or unsealed wood.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy lime scale on taps, use Lithofin KF Bathroom Cleaner. For deep grease in grout joints, switch to Lithofin KF Intensive Cleaner. Hyclean covers the everyday wipe-down between those two tasks.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the surface to 30 °C by running hot water first; the cleaner works 20 % faster.\u003c\/li\u003e\n  \u003cli\u003eUse two cloths: one for the first wipe, one for the rinse, to avoid redepositing oils.\u003c\/li\u003e\n  \u003cli\u003eSwitch nozzles to the fine-mist setting on vertical splashbacks; runoff drops by 60 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"Lithofin HyClean - 1 Liter","offer_id":56880120398156,"sku":"129-21-EU","price":16.95,"currency_code":"EUR","in_stock":false},{"title":"Lithofin HyClean - 500 ml","offer_id":56880120430924,"sku":"129-21-EU","price":20.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/129_62e89e96-f74f-403f-87b9-268e3791808f.webp?v=1772467339"},{"product_id":"lithofin-kf-silicone-remover","title":"Lithofin KF Silicone Remover","description":"\u003cp\u003eOld, blackened silicone joints around your shower tray cling stubbornly to the glazed edges of the tiles. You scrape, the blade skips, and the silicone smears instead of lifting. KF Silicone Remover breaks that bond so you peel the joint off cleanly without scratching the porcelain.\u003c\/p\u003e\n\n\u003ch2\u003eWhat KF Silicone Remover Does\u003c\/h2\u003e\n\u003cp\u003eKF Silicone Remover is an acidic solvent gel cleaner for ceramic and porcelain surfaces. A blend of aliphatic hydrocarbons and mild organic acids (pH ≈ 2) penetrates cured silicone, swells the polymer matrix by 150 %, and detaches it from the substrate. The thixotropic gel clings vertically for up to 90 minutes, giving the active ingredients time to dissolve adhesion promoters and fillers.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBathroom wall joints on \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic tiles\u003c\/a\u003e - use neat, 1 mm gel layer.\u003c\/li\u003e\n  \u003cli\u003eShower tray edges on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain stoneware\u003c\/a\u003e - use neat, 1 mm layer.\u003c\/li\u003e\n  \u003cli\u003eMirror edges on glass-mosaic backsplashes - use neat, 0.5 mm layer.\u003c\/li\u003e\n  \u003cli\u003eCountertop upstands on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e - use neat, 1 mm layer.\u003c\/li\u003e\n  \u003cli\u003eRemoval of smeared silicone prior to \u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003edeep cleaning\u003c\/a\u003e - use neat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eMask acid-sensitive adjacent materials such as anodised aluminium.\u003c\/li\u003e\n  \u003cli\u003eSpread a continuous 1 mm gel coat with a plastic spatula; do not dilute.\u003c\/li\u003e\n  \u003cli\u003eAllow to dwell 20-90 min until the joint swells and turns matt.\u003c\/li\u003e\n  \u003cli\u003eLift silicone with a plastic scraper, then wipe residues with a dry cloth.\u003c\/li\u003e\n  \u003cli\u003eRinse the area thoroughly with warm water and a pH-neutral cleaner.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage consumption 10-20 m² \/L depending on joint thickness. No drying time: new silicone can be applied immediately after the surface is bone-dry.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe gel sits safely on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass-mosaic\u003c\/a\u003e, and low-porosity stones such as basalt because these materials are acid-resistant (Mohs 5-7) and non-absorbent, so the solvents do not stain. Good results are also achieved on granite, slate, concrete, quartz-composite, and clinker. Do not use on lacquered metals, acrylic tubs, or any surface not resistant to solvents and acids.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor ongoing tile maintenance after silicone removal, use \u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003eKF Care\u003c\/a\u003e 1:100 in warm water. For long-term stain defence on absorbent stone, apply KF Stain-Stop at 10 m² \/L once the new joint has cured.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eScore the old joint on both sides with a utility knife first; the gel penetrates faster, cutting dwell time by up to 30 minutes.\u003c\/li\u003e\n  \u003cli\u003eCover freshly applied gel with plastic film to slow evaporation on vertical surfaces; this increases penetration depth by 20 %.\u003c\/li\u003e\n  \u003cli\u003eWarm the area to 25 °C with a hair dryer before application; higher temperature lowers silicone hardness (Shore A) and speeds swelling.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120496460,"sku":"113-21-B","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/113.webp?v=1772467326"},{"product_id":"lithofin-kf-grout-cleaner","title":"Lithofin KF Grout Cleaner","description":"\u003cp\u003eYour bathroom grout looks grey after only six months, soap residue has glued dust into the joints, and standard tile cleaners slide off the problem. Lithofin KF Grout Cleaner solves this exact situation, restoring bright lines between tiles in five minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat KF Grout Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eKF Grout Cleaner is an acidic cleaner for ceramic and porcelain tile grout. At pH 1.5 it breaks down calcium-based limescale, soap fats, and iron stains by converting them into water-soluble salts you rinse away. Surfactants lift organic grime so you scrub 30 % less, and the ready-to-use gel stays on vertical joints for a full 5-minute dwell time.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShower walls with mould-free but grey grout - use undiluted, 120 ml\/m²\u003c\/li\u003e\n\u003cli\u003eKitchen floor joints darkened by grease splash - use undiluted, 150 ml\/m²\u003c\/li\u003e\n\u003cli\u003eOutdoor porcelain patio joints with rust flecks - use undiluted, 130 ml\/m²\u003c\/li\u003e\n\u003cli\u003ePre-sealing clean before \u003ca href=\"\/en-mt\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e - use undiluted, 100 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle, then brush the undiluted liquid directly onto the grout lines at 100-150 ml\/m² - use a nylon grout brush.\u003c\/li\u003e\n\u003cli\u003eWait 5-10 minutes; keep the area wet by re-brushing every 2 minutes.\u003c\/li\u003e\n\u003cli\u003eScrub until the original grout colour re-appears; rinse twice with clean water.\u003c\/li\u003e\n\u003cli\u003eNeutralise any splashes on acid-sensitive stone with water and \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne 500 ml bottle covers 3-5 m² of joint area. Joints dry in 15 minutes; you can re-seal after 60 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eYou safely use the product around \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e because their Mohs hardness is 5-7 and they resist acids. The low-viscosity gel stays in the grout groove, so polished tiles stay untouched. Do not use on marble or other acid-sensitive stone grout joints without masking.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor ongoing weekly maintenance of tile surfaces, use \u003ca href=\"\/en-mt\/products\/lithofin-kf-conditioning-cleaner\"\u003eKF Conditioning Cleaner\u003c\/a\u003e. For long-term stain protection after the grout is clean and dry, apply \u003ca href=\"\/en-mt\/products\/lithofin-kf-grout-protector\"\u003eKF Grout Protector\u003c\/a\u003e at 40 ml\/m².\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm joints to 20 °C before cleaning; reaction speed doubles versus 10 °C.\u003c\/li\u003e\n\u003cli\u003eUse a toothbrush for 3 mm mosaic joints to keep the 100 ml\/m² dosage accurate.\u003c\/li\u003e\n\u003cli\u003eRinse with de-ionised water if you live in a hard-water area; this prevents new limescale from forming.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880120594764,"sku":"115-21-B","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/115.webp?v=1772467330"}],"url":"https:\/\/ixstone.com\/en-mt\/collections\/lithofin-kf.oembed","provider":"adh23084u","version":"1.0","type":"link"}