{"title":"Lithofin MN - Natural Stone Care","description":"\u003cp\u003eProducts for natural stone: marble, granite, bluestone, limestone and more. Cleaning, protecting and maintaining.\u003c\/p\u003e","products":[{"product_id":"lithofin-mn-power-clean","title":"Lithofin MN Power-Clean","description":"\u003cp\u003eYour polished marble bathroom floor shows dull grey traffic lanes and ingrained soap scum that routine mopping no longer shifts. Lithofin MN Power-Clean breaks through this build-up in one pass, restoring the original gloss without etching the stone.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Power-Clean Does\u003c\/h2\u003e\n\u003cp\u003eMN Power-Clean is an alkaline intensive cleaner for natural stone. With a working pH of 10.5 it saponifies grease and loosens waxes, acrylics, and stubborn dirt. Undiluted it dissolves organic residues within 10 minutes; at 1:10 it still removes everyday film while remaining safe for acid-sensitive calcium carbonate surfaces.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished marble bathroom floor with soap build-up - dilute 1:10, 50-67 ml\/m². See \u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003egeneral cleaning guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eRough granite kitchen floor with fryer grease - dilute 1:5, 100-200 ml\/m².\u003c\/li\u003e\n\u003cli\u003eSandstone entrance saturated with foot traffic grime - apply undiluted, 5 m²\/L.\u003c\/li\u003e\n\u003cli\u003eRemoving dried \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eStain-Stop\u003c\/a\u003e residue on limestone vanity - use undiluted.\u003c\/li\u003e\n\u003cli\u003ePrep clean before sealing a terrazzo lobby - dilute 1:5, then rinse twice. Reference \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo care page\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePrepare a plastic bucket: add water first, then product per chosen dilution.\u003c\/li\u003e\n\u003cli\u003eDistribute with mop, white pad, or scrubbing machine at 50 rpm; keep surface wet for 5-10 min.\u003c\/li\u003e\n\u003cli\u003eAgitate stubborn zones with a nylon brush; do not let the solution dry.\u003c\/li\u003e\n\u003cli\u003eVacuum or mop up, then rinse with clean water until the rinse water runs clear.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage ranges 5-20 m²\/L. No drying time-once rinsed and surface is visually dry you may walk on it. Re-clean every 3-6 months as required.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eYou safely treat \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because the moderate alkalinity lifts organic soil without attacking calcium carbonate or silicate matrices. Do not use on aluminium fixtures, enamel, or waxed wood; mask such elements before cleaning.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor daily wipe-downs, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For oil spots that have penetrated deeply, follow with Lithofin OIL-EX paste. If you work on ceramic or porcelain, switch to KF Intensive Cleaner for faster action on glazes.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePre-wet highly porous sandstone to slow absorption and extend the 10 minute dwell time.\u003c\/li\u003e\n\u003cli\u003eOn vertical shower walls, start at the bottom and work upward to avoid streaking marks from concentrated runoff.\u003c\/li\u003e\n\u003cli\u003eNeutralise any residual alkalinity with a clear water rinse of at least 2 L\/m²-this prevents re-soiling films.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter \/ Per stuk","offer_id":56880111583564,"sku":"160-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter \/ Per stuk","offer_id":56880111616332,"sku":"160-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter \/ Doos van 10","offer_id":57401578127692,"sku":"160-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/160.webp?v=1772467358"},{"product_id":"lithofin-mn-outdoor-cleaner","title":"Lithofin MN Outdoor Cleaner","description":"\u003cp\u003eHeavy rain, UV and frost leave your terrace slabs blotchy; algae darken joints and barbecue grease sticks to the granite step. You spray Lithofin MN Outdoor Cleaner, wait two days and rinse: the original colour pops back and the surface loses its slippery film.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Outdoor Cleaner Does\u003c\/h2\u003e\n\u003cp\u003eMN Outdoor Cleaner is an alkaline cleaner for outdoor stone, concrete and ceramic. The pH 12.5 formula releases active chlorine that oxidises leaf stains and tyre marks within 30 minutes and breaks protein-based dirt at the molecular level. No acid means zero etching on marble (Mohs 3) while the high alkalinity opens pores in hard \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e (Mohs 7) so that rinsing flushes the grime away.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSandstone patio after winter - use ready-to-use solution, 100 ml\/m².\u003c\/li\u003e\n\u003cli\u003eConcrete driveway oil haze - apply undiluted, 67 ml\/m².\u003c\/li\u003e\n\u003cli\u003eWood-look porcelain deck before sealing - dilute 1:3, 150 ml\/m².\u003c\/li\u003e\n\u003cli\u003eClinker garden path with leaf marks - ready-to-use, 100 ml\/m².\u003c\/li\u003e\n\u003cli\u003eFollow-up to \u003ca href=\"\/en-mt\/pages\/problem-outdoor-cleaning\"\u003eoutdoor-cleaning\u003c\/a\u003e step 1 (ALGEX) - undiluted, 80 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eRemove loose dirt. Spray or water-can spread 67-200 ml\/m² according to soil level.\u003c\/li\u003e\n\u003cli\u003eWork in with a nylon brush; keep surface wet for 20 minutes.\u003c\/li\u003e\n\u003cli\u003eLeave 24-48 h; reaction time is weather-dependent (5-25 °C ideal).\u003c\/li\u003e\n\u003cli\u003eRinse with a hose or low-pressure washer from 30 cm distance.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-15 m²\/L. Allow 24 h drying before sealing or foot traffic; full curing ends after 48 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula shines on \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, basalt, \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e pavers, and \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e because oxidative cleaning does not rely on acid that could pit soft minerals. It is also safe for outdoor \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, limestone, porcelain and cotto when pre-wetted. Do not use indoors or over vegetation; cover plants first.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor living algae or moss apply Lithofin ALGEX first; after 24-48 h rinse, then clean with MN Outdoor Cleaner. For long-term stain prevention seal the dry surface with \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Need an indoor deep clean? Pick MN Power-Clean instead.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm weather (15-20 °C) accelerates oxidation by 25 %, shortening dwell time.\u003c\/li\u003e\n\u003cli\u003eScrub across, not along, the grout lines; this avoids detergent pooling and gives uniform colour.\u003c\/li\u003e\n\u003cli\u003eRepeat annually in spring or autumn; regular cycles stop deep-rooted stains from setting.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880111714636,"sku":"163-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880111747404,"sku":"163-11-B","price":50.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401579307340,"sku":"163-11-B-DOOS-10","price":140.76,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/163.webp?v=1772467364"},{"product_id":"lithofin-mn-builders-clean","title":"Lithofin MN Builders' Clean","description":"\u003cp\u003eFreshly laid granite steps show a stubborn grey haze, the slate hallway already has white efflorescence marks and the contractor leaves tomorrow. Builders' Clean removes that cement residue in one pass, leaving the stone ready for sealing or immediate use.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Builders' Clean Does\u003c\/h2\u003e\n\u003cp\u003eBuilders' Clean is an acidic cleaner for natural stone. With a pH of 1.4 it converts calcium-rich cement and limescale into soluble salts, releasing them from the surface within 3-5 minutes. Inorganic inhibitors limit attack on silicate minerals, so granite (Mohs 7) and basalt (Mohs 7) stay unchanged while up to 200 g\/m² of cement film dissolves.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen worktops, 1:3 dilution, to strip grout haze.\u003c\/li\u003e\n\u003cli\u003eInterior \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e floors showing limescale rings, 1:3 dilution.\u003c\/li\u003e\n\u003cli\u003eExterior sandstone paving with white \u003ca href=\"\/en-mt\/pages\/problem-efflorescence\"\u003eefflorescence\u003c\/a\u003e, 1:5 dilution.\u003c\/li\u003e\n\u003cli\u003eBasalt stairs after heavy building work, undiluted for cement drops up to 2 mm thick.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/stone-terracotta\"\u003eTerracotta\u003c\/a\u003e tiles before sealing, 1:10 dilution to protect soft surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePre-wet the stone until the surface darkens; leave no dry patches. Time: 2 minutes.\u003c\/li\u003e\n\u003cli\u003eApply solution with a nylon brush or low-pressure spray; use 100 ml\/m² at 1:3 dilution. Time: PT5M.\u003c\/li\u003e\n\u003cli\u003eAgitate with a white pad after 3 minutes contact; keep surface wet. Time: PT5M.\u003c\/li\u003e\n\u003cli\u003eRinse twice with clean water, vacuum slurry before it dries. Time: PT5M.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 5-15 m²\/L depending on dilution and porosity. No drying time-surface is neutral after the final rinse.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe acidic formula suits \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and clinker because their silica framework resists low pH attack. Sandstone and concrete tolerate a 1:5 mix when pre-wetted, as the water layer limits acid penetration. Do not use on polished marble, aluminium fixtures, or acid-sensitive limestone without a 1:10 trial spot.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine grease removal, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e. For long-term stain protection after cleaning, apply \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For ceramic or porcelain grout haze, switch to KF Cement Residue Remover.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the area ventilated; acid vapours settle on metal fittings within 10 minutes.\u003c\/li\u003e\n\u003cli\u003eNeutralise rinse water with 50 g baking soda per 10 L before disposal to protect drains.\u003c\/li\u003e\n\u003cli\u003eSeal cleaned stone within 24 hours to block resoiling and reduce water absorption by up to 90 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880111812940,"sku":"162-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880111845708,"sku":"162-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401579471180,"sku":"162-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/162.webp?v=1772467361"},{"product_id":"lithofin-care-kit-natural-stone-floors","title":"Lithofin MN Care Set for Natural Stone Floors (Compact)","description":"\u003cp\u003eYour polished marble hallway starts to dull, grout lines trap grime, and weekend mopping no longer restores the original sheen. The Lithofin MN Onderhoudsset ends that slide: one box gives you both deep-cleaning and weekly maintenance power for every natural stone floor in the house.\u003c\/p\u003e\n\u003ch2\u003eWhat Onderhoudsset Does\u003c\/h2\u003e\n\u003cp\u003eOnderhoudsset is a neutral care kit for natural stone floors. The 2-product system pairs a pH ≈ 10 alkaline cleaner that breaks down fatty soils and soap scum with a pH ≈ 8 maintenance wash that lifts day-to-day dirt without leaving surfactant films. Solvents at \u0026lt;2 % dissolve light wax, while complexing agents bind Ca²⁺ to prevent streaks. One kit services 60-120 m² when dosed at 1:200.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFirst-time restoration of a \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e kitchen floor - dilute 1:10 for the initial scrub.\u003c\/li\u003e\n\u003cli\u003eWeekly wipe of a \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e bathroom - dilute 1:200 in warm water.\u003c\/li\u003e\n\u003cli\u003ePost-renovation dust film on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e tiles - dilute 1:20, dwell 5 min.\u003c\/li\u003e\n\u003cli\u003eTraffic lanes on a \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e entrance - dilute 1:15, agitate with soft pad.\u003c\/li\u003e\n\u003cli\u003eQuick refresh of porcelain kitchen plinths - dilute 1:200, no rinse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVacuum the floor, then mix 50 ml cleaner with 1 L warm water (1:20) for deep cleaning.\u003c\/li\u003e\n\u003cli\u003eSpread solution with a microfibre mop, keep surface wet for 5 minutes.\u003c\/li\u003e\n\u003cli\u003eScrub joints using a white pad, pick up slurry with a wet vac.\u003c\/li\u003e\n\u003cli\u003eFor daily care, add 25 ml maintenance wash to 5 L water (1:200) and mop; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre covers 5-15 m² at 1:20 or up to 300 m² at 1:200. Floor is touch-dry after 30 minutes at 20 °C and ready for foot traffic immediately.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula is safe on acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e and \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e because the mildly alkaline pH will not etch CaCO₃. Low-foaming surfactants lift dirt from dense \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e and \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, while sequestrants keep pores open on porous \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e and \u003ca href=\"\/en-mt\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e. Do not use on oiled wood or waxed cork.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain repellence after cleaning, apply \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For cement haze or heavy builders’ dirt, shift to \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse 40 °C water: surfactant activity doubles between 20 °C and 40 °C, cutting dwell time by 3 minutes.\u003c\/li\u003e\n\u003cli\u003eReplace rinse water every 30 m² to prevent redepositing fine clay particles.\u003c\/li\u003e\n\u003cli\u003eBuff dry with a white pad: friction heat raises gloss on Mohs 3-4 stones by up to 10 GU.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880111911244,"sku":"203-11-B","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/203.webp?v=1772467426"},{"product_id":"lithofin-mn-stain-stop","title":"Lithofin MN Stain-Stop","description":"\u003cp\u003eYour marble kitchen countertop handles coffee, red wine, and cooking oil every day. One missed wipe-up can sink deep, leaving a dark ring you cannot polish away. Lithofin MN Stain-Stop ends that worry by filling the pores before stains reach them.\u003c\/p\u003e\n\u003ch2\u003eWhat Stain-Stop Does\u003c\/h2\u003e\n\u003cp\u003eStain-Stop is a neutral solvent-based impregnator for natural stone. Silane and siloxane molecules (pH ≈7.5) migrate up to 2 mm into the capillaries, then polymerise, creating a water- and oil-repellent network that leaves the surface appearance unchanged. You block red wine, oil, or coffee for 8-12 hours, giving you time to wipe spills without marks.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFreshly installed \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e kitchen tops - Ready to use, 70 ml\/m².\u003c\/li\u003e\n\u003cli\u003eOutdoor \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e terrace before winter - Ready to use, 150 ml\/m².\u003c\/li\u003e\n\u003cli\u003eBathroom \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e vanity after deep clean - Ready to use, 90 ml\/m².\u003c\/li\u003e\n\u003cli\u003eHigh-traffic \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e lobby floor needing \u003ca href=\"\/en-mt\/pages\/problem-stain-protection\"\u003estain protection\u003c\/a\u003e - Ready to use, 120 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the stone is dry for 24-48 h and free of residues; clean with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePour Stain-Stop into a tray and apply evenly with a lint-free cloth, sponge, or brush, keeping the surface wet for 5 min.\u003c\/li\u003e\n\u003cli\u003eAfter 10-15 min penetration, buff off all excess with a dry white pad until the surface feels dry.\u003c\/li\u003e\n\u003cli\u003eFor very porous stone, repeat once while the first coat is still tack-free (within 30 min).\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-20 m²\/L. Light use after 2 h; full chemical resistance after 24 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent results on \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e. The neutral chemistry avoids etching acid-sensitive Mohs 3 stones while penetrating dense Mohs 7 granite. Do not use on pre-sealed, wet, or highly polished stone where residue cannot be buffed off.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing, follow with \u003ca href=\"\/en-mt\/products\/lithofin-mn-easy-clean\"\u003eMN Easy-Clean\u003c\/a\u003e. For basic entry-level sealing choose MN Basic Protection; for ceramics use KF Stain-Stop; for water-based, low-odour jobs select Fleckstop \u0026gt;W\u0026lt;.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTest absorbency: a 3-second water drop that darkens tells you impregnation is needed.\u003c\/li\u003e\n\u003cli\u003eWarm stone (18-25 °C) opens pores by up to 15 %, improving penetration.\u003c\/li\u003e\n\u003cli\u003eBuff residue thoroughly; leftover film can reduce water vapour permeability by 30 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"250ml","offer_id":56880112009548,"sku":"166-11-B","price":28.95,"currency_code":"EUR","in_stock":false},{"title":"500ml","offer_id":56880112042316,"sku":"166-11-B","price":33.95,"currency_code":"EUR","in_stock":false},{"title":"1 Liter","offer_id":56880112075084,"sku":"166-11-B","price":49.95,"currency_code":"EUR","in_stock":false},{"title":"5 Liter","offer_id":56880112107852,"sku":"166-11-B","price":180.95,"currency_code":"EUR","in_stock":false},{"title":"250ml (doos van 12)","offer_id":57401579962700,"sku":"166-11-B-DOOS-12","price":307.54,"currency_code":"EUR","in_stock":false},{"title":"500ml (doos van 12)","offer_id":57401580028236,"sku":"166-11-B-DOOS-12","price":362.62,"currency_code":"EUR","in_stock":false},{"title":"1 Liter (doos van 10)","offer_id":57401580093772,"sku":"166-11-B-DOOS-10","price":447.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/166.webp?v=1772467371"},{"product_id":"lithofin-mn-concrete-coating","title":"Lithofin MN Concrete Coating","description":"\u003cp\u003eYour concrete terrace pavers look chalky, soak up every rain shower, and show dark algae shadows even after cleaning. You need a long-lasting barrier that revives colour and blocks moisture before the next winter freeze. Lithofin MN Concrete Coating delivers that protection in one ready-to-use layer.\u003c\/p\u003e\n\u003ch2\u003eWhat Concrete Coating Does\u003c\/h2\u003e\n\u003cp\u003eConcrete Coating is a neutral solvent-based sealer for exterior \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e. The resin penetrates 2-4 mm, polymerises within 24 h, and leaves a 5-10 µm micro-film that cuts water uptake by 90 % and oil absorption by 70 %. Colour depth increases about 20 %, giving weathered slabs a fresh, slightly wet look. UV-stable additives hold the effect for 2-5 years before recoat.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete terrace slabs after pressure-washing - apply neat, 120 ml\/m².\u003c\/li\u003e\n\u003cli\u003eGarden paths with biological staining - after \u003ca href=\"\/en-mt\/pages\/problem-outdoor-cleaning\"\u003eoutdoor-cleaning\u003c\/a\u003e, 150 ml\/m².\u003c\/li\u003e\n\u003cli\u003eExposed-aggregate patio around pools - 200 ml\/m² for extra splash resistance.\u003c\/li\u003e\n\u003cli\u003ePoured concrete steps that dust in summer - single coat, 100 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the surface with \u003ca href=\"\/en-mt\/products\/lithofin-mn-outdoor-cleaner\"\u003eMN Outdoor Cleaner\u003c\/a\u003e, rinse, and let dry 24 h.\u003c\/li\u003e\n\u003cli\u003eMask adjacent stone or wood. Shake Concrete Coating 30 s.\u003c\/li\u003e\n\u003cli\u003eRoll, brush, or spray a thin, even coat at 100-200 ml\/m². Keep a wet edge.\u003c\/li\u003e\n\u003cli\u003eAfter 10 min remove puddles. For very porous zones apply a second wet-on-wet pass within 20 min.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 5-15 m²\/L depending on porosity. Foot traffic is possible after 4 h; full chemical cure after 24 h at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe coating bonds perfectly to high-porosity, Mohs 5 \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e; the neutral formula avoids alkaline bloom and does not etch. It is unsuitable for natural stone, ceramic tiles, or indoor floors where colour change is unwanted.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor heavy algae or lichen removal use Lithofin ALGEX first, then seal with Concrete Coating. For colour intensification on granite or marble, switch to MN Colour Intensifier. Need periodic deep cleaning? Use \u003ca href=\"\/en-mt\/products\/lithofin-mn-outdoor-cleaner\"\u003eMN Outdoor Cleaner\u003c\/a\u003e twice a year to maintain the sealed surface.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways test 0.1 m²; adjust application rate until a slight sheen remains for 30 s-this ensures full pore saturation.\u003c\/li\u003e\n\u003cli\u003eApply when surface temperature is 10-25 °C; higher heat flashes solvent too fast, reducing penetration by up to 40 %.\u003c\/li\u003e\n\u003cli\u003eBlow leaves or dust away before curing-debris embedded during the first hour becomes permanent until the next sanding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ca href=\"\/en-mt\/pages\/care-concrete-pavers-outdoor\"\u003eConcrete paver care guide\u003c\/a\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880112173388,"sku":"194-11-B","price":37.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/lithofin-mn-betoncoating.jpg?v=1781188309"},{"product_id":"lithofin-mn-slate-oil","title":"Lithofin MN Slate-Oil","description":"\u003cp\u003eYour slate kitchen countertop looks chalky and washed-out after daily scrubbing. Patio slabs have lost the deep charcoal tone that sold you on slate in the first place. Slate-Oil restores that rich colour in one easy coat.\u003c\/p\u003e\n\u003ch2\u003eWhat Slate-Oil Does\u003c\/h2\u003e\n\u003cp\u003eSlate-Oil is a neutral, oil-based colour-enhancing impregnator for slate. The low-viscosity oil (pH 7) penetrates 1-2 mm, filling micro-pores and raising light absorption so colours read darker by up to 30 %. Once cured, the polymerised oil repels water and dirt while allowing vapour diffusion, preventing surface greying caused by capillary moisture.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInterior slate floors in kitchens or hallways - 50 ml\/m² undiluted after deep clean\u003c\/li\u003e\n\u003cli\u003eOutdoor slate patios exposed to UV and frost - 70 ml\/m² undiluted after \u003ca href=\"\/en-mt\/pages\/problem-outdoor-cleaning\"\u003eoutdoor cleaning\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eFaded slate fireplace surrounds - 40 ml\/m² undiluted for colour pop\u003c\/li\u003e\n\u003cli\u003eRestoring antiqued slate worktops after sanding - 60 ml\/m² undiluted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the can, pour Slate-Oil into a paint tray, and load a lint-free cloth.\u003c\/li\u003e\n\u003cli\u003eWipe a thin, even film across 2 m² sections; keep wet edges to avoid lap marks.\u003c\/li\u003e\n\u003cli\u003eAfter 10 minutes, buff off excess oil with a clean cloth until the surface feels dry.\u003c\/li\u003e\n\u003cli\u003eLet the area sit 2-4 hours before light traffic; avoid moisture for 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 15-30 m² per litre depending on slate texture. Full cure 24 hours at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e because its Mohs 4 matrix is acid-resistant and mildly porous, letting the neutral oil lodge without etching. Do not use on polished marble, glazed ceramic, or any surface where darkening is unwanted.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For stripping old waxes before re-oiling, reach for \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the room to 18-22 °C; higher viscosity at low temperatures reduces penetration.\u003c\/li\u003e\n\u003cli\u003eTest absorbency by placing a drop of water; if it darkens immediately, Slate-Oil will bond uniformly.\u003c\/li\u003e\n\u003cli\u003eRe-buff after 30 minutes to remove weeping spots; prevents sticky patches that trap dust.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880112271692,"sku":"177-11-B","price":31.95,"currency_code":"EUR","in_stock":false},{"title":"500ml","offer_id":56880112304460,"sku":"177-11-B","price":25.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580126540,"sku":"177-11-B-DOOS-10","price":287.46,"currency_code":"EUR","in_stock":false},{"title":"500ml (doos van 12)","offer_id":57401580224844,"sku":"177-11-B-DOOS-12","price":274.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/177.webp?v=1772467392"},{"product_id":"lithofin-mn-protector-bluestone","title":"Lithofin MN Protector for Bluestone","description":"\u003cp\u003eYour bluestone kitchen island keeps showing dark rings from olive oil and coffee. One wipe leaves a shadow in the pores. MN Protector stops the stains before they form, sealing every capillary in one easy coat.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Protector Does\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMN Protector\u003c\/strong\u003e is a neutral impregnator for medium-porous natural stone. Its pH-7, solvent-carried fluoropolymer penetrates up to 3 mm, lining the pores so oil molecules ≥1 µm and water droplets bead instead of soaking in. One 500 ml bottle guards 10 m² for 6-12 months, resisting red wine, grease, and coffee at 20 °C after 24 h cure.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBluestone kitchen countertops - undiluted, 200 ml\/m² (\u003ca href=\"\/en-mt\/pages\/problem-stain-protection\"\u003e\/pages\/problem-stain-protection\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eBluestone dining tables in restaurants - undiluted, 180 ml\/m² for faster turnover\u003c\/li\u003e\n\u003cli\u003eOutdoor bluestone benches - undiluted, 220 ml\/m² after 48 h dry weather\u003c\/li\u003e\n\u003cli\u003eHoned slate bathroom shelves - undiluted, 200 ml\/m² (\u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003e\/pages\/stone-slate\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eFlamed granite BBQ tops - undiluted, 200 ml\/m² (\u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003e\/pages\/stone-granite\u003c\/a\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eDamp-dust the surface, then let it dry until moisture meter reads ≤0.5 % (about 24 h).\u003c\/li\u003e\n\u003cli\u003ePour MN Protector into a paint tray; load a lint-free cloth and wipe evenly, keeping a wet film for 2 min. PT5M\u003c\/li\u003e\n\u003cli\u003eAfter 10 min, buff off excess with a white pad to avoid streaks. PT5M\u003c\/li\u003e\n\u003cli\u003eWait 24 h before use; avoid water contact during this period. PT5M\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 10 m² per 500 ml on honed bluestone, 8 m² on rough textures. Second coat not required. Full chemical resistance after 24 h at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e because the neutral carrier will not etch its acid-sensitive calcite. Good on dense \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e; the formula’s small polymer size can still enter their low-porosity structure. Do not use on polished surfaces where penetration is impossible.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor deep, permanent stain block on any finish, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For daily cleaning that preserves MN Protector’s hydrophobic layer, mop with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWarm the stone to 18-22 °C; absorption rises 15 % compared with a cold slab.\u003c\/li\u003e\n\u003cli\u003eMask stainless steel taps; solvents can dull brushed finishes within 30 s.\u003c\/li\u003e\n\u003cli\u003eTest water beading after cure; if droplets flatten, apply a maintenance coat at 150 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880112763212,"sku":"388-21-B","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/388-1l.webp?v=1781186702"},{"product_id":"lithofin-mn-care-seal","title":"Lithofin MN Care-Seal","description":"\u003cp\u003eYour sealed marble foyer has started to dull and water no longer beads after months of foot traffic. Lithofin MN Care-Seal steps in as a quick mop-on refresher that replaces lost repellency and sheen in under 5 minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat Care-Seal Does\u003c\/h2\u003e\n\u003cp\u003eCare-Seal is a neutral maintenance sealer for natural stone. The pH-7.5 polymer micro-emulsion deposits a 0.1 µm protective film that renews water- and oil-repellency, closes micro-scratches, and dries within 3 minutes. One litre, diluted, covers 50-100 m², extending the interval between full impregnations by up to 12 months.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble bathroom floor\u003c\/a\u003e - dilute 50 ml\/10 L, weekly wipe.\u003c\/li\u003e\n\u003cli\u003eRough \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite patio\u003c\/a\u003e after rain staining - dilute 100 ml\/10 L, monthly mop.\u003c\/li\u003e\n\u003cli\u003eHigh-porosity \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone kitchen tiles\u003c\/a\u003e needing interim protection - dilute 80 ml\/10 L.\u003c\/li\u003e\n\u003cli\u003eCommercial \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo lobby\u003c\/a\u003e under heavy traffic - dilute 100 ml\/10 L, fortnightly auto-scrubber pass.\u003c\/li\u003e\n\u003cli\u003eRoutine \u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003edaily maintenance\u003c\/a\u003e where a one-step clean-and-seal is preferred - dilute 60 ml\/10 L.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eVacuum or damp-wipe to remove loose grit.\u003c\/li\u003e\n\u003cli\u003eMix 50-100 ml Care-Seal with 10 L warm water (0.5-1 %).\u003c\/li\u003e\n\u003cli\u003eMop or wipe evenly; keep surface damp for 2 minutes.\u003c\/li\u003e\n\u003cli\u003eAllow to air-dry; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAt 10-20 ml\/m² the diluted solution treats 50-100 m²\/L. Surface is walk-safe after 5 minutes; full hardness forms in 30 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral formula will not etch acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e or \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, yet bonds strongly to low-porosity stones like \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e and \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e. It compensates for very-high porosity in \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e. Do not use on unsealed porous stone or on high-gloss polished slabs where visible residue may appear.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term oil and wine resistance, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For initial sealing of newly laid tiles, use MN Basic Protection. Care-Seal slots between these treatments as the weekly-to-monthly maintenance coat.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlternate Care-Seal with MN Wash \u0026amp; Clean to avoid film build-up; the neutral pH of both products maintains sealer integrity.\u003c\/li\u003e\n\u003cli\u003eWarm water (35 °C) improves polymer flow, increasing coverage by up to 10 %.\u003c\/li\u003e\n\u003cli\u003eBuff with a white pad after drying to raise gloss on marble without additional chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880112828748,"sku":"170-11-B","price":21.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880112861516,"sku":"170-11-B","price":71.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580257612,"sku":"170-11-B-DOOS-10","price":194.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/170.webp?v=1772467377"},{"product_id":"lithofin-mn-basic-protection","title":"Lithofin MN Basic Protection","description":"\u003cp\u003eYour newly laid limestone bathroom floor absorbs every splash and shows dark marks within seconds. MN Basic Protection stops the water before it enters the pores, leaving the stone unchanged and easy to mop.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Basic Protection Does\u003c\/h2\u003e\n\u003cp\u003eMN Basic Protection is a neutral impregnator for natural stone. The solvent-based formula penetrates up to 2 mm, lines each capillary with a hydrophobic siloxane layer, and reduces water absorption by approx. 90 % while keeping vapour permeability above 80 %. pH-neutral chemistry (pH 7) means no risk of etching on acid-sensitive stones.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLimestone shower walls after deep cleaning with \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e - apply undiluted, 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003ePolished marble foyer floor needing invisible protection - apply undiluted, 33 ml\/m².\u003c\/li\u003e\n\u003cli\u003eRough granite outdoor terrace handled in the \u003ca href=\"\/en-mt\/pages\/care-granite-outdoor-terrace\"\u003egranite terrace care guide\u003c\/a\u003e - apply undiluted, 70 ml\/m².\u003c\/li\u003e\n\u003cli\u003eSandstone patio before the rainy season to cut moss growth - apply undiluted, 80 ml\/m².\u003c\/li\u003e\n\u003cli\u003eTerrazzo staircases in public buildings for easier daily maintenance with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e - apply undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the stone is clean, bone-dry, and 5-25 °C.\u003c\/li\u003e\n\u003cli\u003eSpread MN Basic Protection evenly with a lint-free cloth or short-pile roller until the surface looks wet.\u003c\/li\u003e\n\u003cli\u003eAfter 5 minutes, redistribute any puddles; stone should stay glossy-wet for at least 10 minutes to allow penetration.\u003c\/li\u003e\n\u003cli\u003eWipe off all residue within 30 minutes using a dry cloth; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 10-30 m²\/L depending on porosity. Light foot traffic after 2 hours; full use and washing after 24 hours. Re-treat interior zones every 3-5 years, exterior zones every 2-3 years.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe impregnator excels on \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because its pH-neutral carrier neither etches  Mohs 3 carbonates nor leaves film on dense Mohs 7 siliceous stones. Do not use on wet or previously sealed surfaces; the product must penetrate to perform.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor standard water repellency without colour change, choose MN Basic Protection. For areas exposed to oil and food, use MN Stain-Stop. For colour enrichment on slate or basalt, select MN Colour Intensifier.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways mask adjacent glass or metal; solvent can leave streaks that need mechanical polishing.\u003c\/li\u003e\n\u003cli\u003eWarm stone (18-22 °C) absorbs evenly, preventing patchy curing and saving up to 10 % product.\u003c\/li\u003e\n\u003cli\u003eTest water beading after 24 hours; if droplets flatten within 30 seconds, apply a second thin coat at 20 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880112894284,"sku":"165-11-B","price":26.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880112927052,"sku":"165-11-B","price":92.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580355916,"sku":"165-11-B-DOOS-10","price":239.94,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/165.webp?v=1772467368"},{"product_id":"lithofin-mn-stain-stop-eco","title":"Lithofin MN Stain-Stop \u003eECO\u003c","description":"\u003cp\u003eYour new limestone kitchen benchtop darkens every time olive oil splashes, and patio sandstone soaks up red wine in seconds. Stain-Stop ECO fixes both problems in one coat.\u003c\/p\u003e\n\n\u003ch2\u003eWhat Stain-Stop ECO Does\u003c\/h2\u003e\n\u003cp\u003eStain-Stop ECO is a neutral, water-based impregnator for porous natural stone. The pH 8 fluoropolymer micro-emulsion penetrates 2-4 mm, lining capillaries with 0.1 µm film that repels liquids while letting 80 % of water vapour escape. Independent tests show water uptake reduced by 90 % and oil absorption by 70 % after 24 h.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFreshly installed \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e floors - neat application, 150 ml\/m².\u003c\/li\u003e\n  \u003cli\u003ePolished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e vanity tops showing etch-prone spots - neat, 125 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eRough \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e barbecue counters before first barbecue season - neat, 180 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eHigh-traffic \u003ca href=\"\/en-mt\/pages\/stone-terracotta\"\u003eterracotta\u003c\/a\u003e hallway tiles needing dirt resistance - neat, 140 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eOutdoor slabs after deep cleaning for \u003ca href=\"\/en-mt\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e - neat, 160 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eEnsure surface is dry (\u0026lt;10 % moisture) and dust-free; tape off non-porous trim.\u003c\/li\u003e\n  \u003cli\u003eFlood the stone with undiluted product using a lambswool roller, keeping a wet edge for 5 min.\u003c\/li\u003e\n  \u003cli\u003eMassage puddles with a white pad; after 10 min wipe off all excess with absorbent cloths.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure 24 h before water contact and 48 h before food preparation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 4-8 m²\/L depending on porosity. Full hydrophobic effect develops after 48 h.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on highly porous \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, cotto and terracotta because the small polymer size penetrates deep voids. Good on lower-porosity surfaces such as \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, terrazzo and basalt; two coats may be required. The neutral formula will not etch acid-sensitive marble. Do not use on glazed ceramic or any non-porous surface.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine cleaning after impregnation, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For maximum solvent-based oil repellency on commercial kitchens, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the room to 15-25 °C; viscosity drops 12 %, improving penetration.\u003c\/li\u003e\n  \u003cli\u003eBuff with microfibre 30 min after application; this raises gloss by up to 8 GU on polished stone.\u003c\/li\u003e\n  \u003cli\u003eRe-wet a stubborn patch with more product instead of scrubbing; the carrier re-opens the film for even absorption.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880117416268,"sku":"198-11-B","price":44.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880117449036,"sku":"198-11-B","price":152.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580388684,"sku":"198-11-B-DOOS-10","price":399.42,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/198.webp?v=1772467420"},{"product_id":"lithofin-mn-concrete-coating-black","title":"Lithofin MN Concrete Coating Black","description":"\u003cp\u003eYour driveway pavers fade to dull grey and absorb oil spots after every barbecue. One roller coat of Lithofin MN Betoncoating - Black (article 962) revives the deep charcoal tone and blocks stains before they start.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Betoncoating Does\u003c\/h2\u003e\n\u003cp\u003eMN Betoncoating is a neutral protective coating for porous \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e. The solvent-borne acrylic polymer (pH ≈7) penetrates up to 2 mm, then forms a 3 µm film that repels water (contact angle \u0026gt;100°) and oil for 3-5 years. Black pigments lodge in the surface pores, evening out colour without forming a thick varnish. One litre covers 25 m².\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConcrete patio slabs after high-pressure washing - apply neat, 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eDriveway pavers suffering oil drips - apply neat, 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eGarden paths exposed to frost cycles - apply neat, 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eVertical concrete walls that streak in rain - apply neat, 40 ml\/m².\u003c\/li\u003e\n\u003cli\u003eUnpolished natural stone with Mohs ≤5 needing dark enhancement - spot test, apply neat, 40 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e; rinse and let dry 24-48 h.\u003c\/li\u003e\n\u003cli\u003eStir MN Betoncoating; do not dilute.\u003c\/li\u003e\n\u003cli\u003eRoll or brush a thin, even layer at 40 ml\/m²; keep a wet edge.\u003c\/li\u003e\n\u003cli\u003eAfter 20 min, remove puddles; allow foot traffic only after 4 h.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 25 m²\/L. Touch-dry in 30 min at 20 °C, fully cured after 24 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eExcellent on rough or sand-blasted \u003ca href=\"\/en-mt\/pages\/stone-concrete\"\u003econcrete\u003c\/a\u003e because its acrylic matrix bonds to the material’s open capillaries without sealing them completely, so vapour can escape. Neutral chemistry means it will not etch acid-sensitive fillers. Do not use on glazed tiles, dense granite, or any non-porous surface.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing after coating, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For invisible oil and water protection without colour change, choose \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways coat the entire slab run; batch variations become invisible once the uniform black tone dries.\u003c\/li\u003e\n\u003cli\u003eApply a second thin coat on high-traffic zones after 2 h; it boosts film thickness by 50 % and wear life.\u003c\/li\u003e\n\u003cli\u003eMaintain with pH-neutral cleaners; alkaline products (pH \u0026gt;10) can soften the acrylic after repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 Liter","offer_id":56880117547340,"sku":"962-11-B","price":28.95,"currency_code":"EUR","in_stock":false},{"title":"5 Liter","offer_id":56880117580108,"sku":"962-11-B","price":87.95,"currency_code":"EUR","in_stock":false},{"title":"1 Liter (doos van 10)","offer_id":57401580454220,"sku":"962-11-B-DOOS-10","price":256.14,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/962.webp?v=1772467483"},{"product_id":"lithofin-mn-easy-clean","title":"Lithofin MN Easy-Clean","description":"\u003cp\u003eSplash marks on your marble kitchen countertop, greasy fingerprints on the quartz island, water rings on the limestone vanity-daily mess builds up fast. Lithofin MN Easy-Clean removes that film in seconds, so you wipe once and move on.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Easy-Clean Does\u003c\/h2\u003e\n\u003cp\u003eMN Easy-Clean is a neutral maintenance cleaner for natural stone, quartz, and ceramic. With a pH of 7.5 it stays within the safe zone for acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e. Mild surfactants lift fats, soap scum, and light limescale up to 0.1 mm thick; alcohol flashes off in under 60 seconds, leaving no streaks. Ready-to-use strength means 0 dilution errors and uniform cleaning power every time.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble kitchen countertop spot cleaning - 1:1 ready spray for 50 ml\/m² (\u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eGranite sink surround after food prep - 1:1 ready spray for 70 ml\/m²\u003c\/li\u003e\n\u003cli\u003eLimestone bathroom vanity to remove toothpaste splatter - 1:1 ready spray for 80 ml\/m²\u003c\/li\u003e\n\u003cli\u003eGlass-mosaic backsplash degreasing - 1:1 ready spray for 100 ml\/m² (\u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003ePorcelain coffee table rings - 1:1 ready spray for 60 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle once and hold the nozzle 15 cm from the surface.\u003c\/li\u003e\n\u003cli\u003eSpray a thin, even film-approximately 10 pumps per 1 m².\u003c\/li\u003e\n\u003cli\u003eWipe immediately with a clean microfiber cloth, folding the cloth to expose fresh sections.\u003c\/li\u003e\n\u003cli\u003eBuff dry with the second side of the cloth; no rinsing required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 50-100 ml\/m², so a 500 ml bottle treats 5-10 m². Surface is food-safe as soon as it is touch-dry-usually 1 minute at 20 °C. Reapply as often as you like; the neutral formulation will not build residue.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse confidently on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, slate, basalt, and terrazzo because the non-acidic formula will not etch or open pores. It also works on porcelain and ceramic tiles. The pH-neutral base protects acid-sensitive surfaces such as marble and limestone while removing everyday grime. Do not use Easy-Clean for large floor areas; switch to MN Wash \u0026amp; Clean for economy.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor bucket-mopping broad floors, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e (dilute 1:100). For long-term oil and wine protection, seal with \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Easy-Clean stays on standby for quick countertop wipe-downs.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep two microfiber cloths: one for the initial wipe, one for the final buff; this halves streak risk.\u003c\/li\u003e\n\u003cli\u003eWarm the cloth under hot water, wring out, then wipe-heat speeds evaporation by 15 % and leaves zero shadowing.\u003c\/li\u003e\n\u003cli\u003eOn heavily used café bars, finish with a pass of MN Stain-Stop every six months; the sealer reduces next-day staining by up to 90 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880117678412,"sku":"189-11-B","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/189.webp?v=1772467414"},{"product_id":"lithofin-care-kit-natural-stone-worktops","title":"Lithofin MN Care Set for Natural Stone \u0026 Quartz Composite Countertops","description":"\u003cp\u003eYour marble kitchen island shows dull grease shadows and sticky fingerprints after every meal prep. Water alone leaves streaks, and harsh products risk etching the stone. The MN Care Kit ends the cycle with one alkaline deep cleaner and one neutral daily spray tailored to natural and composite worktops.\u003c\/p\u003e\n\n\u003ch2\u003eWhat MN Care Kit Does\u003c\/h2\u003e\n\u003cp\u003eMN Care Kit is a two-part system: MN Vuiloplosser is an alkaline cleaner (pH 11) that dissolves grease, wax, and soap scum; MN Easy-Clean is a neutral maintenance spray (pH 7.5) that lifts fresh spills and buffs to a streak-free finish. The first breaks down polymerised kitchen residues within 10 minutes; the second encapsulates light dirt with non-ionic surfactants and evaporates in 2 minutes, leaving no film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasy \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e hob surrounds - dilute MN Vuiloplosser 1:10.\u003c\/li\u003e\n  \u003cli\u003eEtch-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e breakfast bars - spray MN Easy-Clean undiluted.\u003c\/li\u003e\n  \u003cli\u003eStained \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e sinks after red-wine night - soak with Vuiloplosser 1:5.\u003c\/li\u003e\n  \u003cli\u003eDaily wipe-downs of limestone splashbacks - one trigger pull of Easy-Clean per 0.5 m².\u003c\/li\u003e\n  \u003cli\u003ePre-sealing wash before applying \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e - Vuiloplosser 1:20.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDilute MN Vuiloplosser with warm water (1:10 for routine, 1:5 for heavy soil) and spread with a white pad.\u003c\/li\u003e\n  \u003cli\u003eWork the solution for 5 minutes, keep wet, then rinse twice with clean water.\u003c\/li\u003e\n  \u003cli\u003eFor daily care, spray MN Easy-Clean directly on the cool surface and wipe with a microfibre cloth.\u003c\/li\u003e\n  \u003cli\u003eBuff dry; surface is food-safe after 2 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre of diluted Vuiloplosser covers 20 m²; a 500 ml Easy-Clean bottle treats about 40 m². No curing time required.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe kit scores excellent on \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e because the alkaline formula lifts organic grime without acid that would etch soft Mohs 3 stones, while the neutral spray leaves no salt deposits on low-porosity substrates. Do not use the alkaline component on polished aluminium appliances.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain blocking after cleaning, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For restoring worn gloss on dark granite, finish with \u003ca href=\"\/en-mt\/products\/lithofin-mn-polish\"\u003eMN Polish Liquid\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat accelerates evaporation; cool the worktop to below 25 °C before using Easy-Clean to avoid streaks.\u003c\/li\u003e\n  \u003cli\u003eUse a white melamine pad with Vuiloplosser to reach the microscopic pits of sandstone-laboratory tests show 20 % higher soil removal.\u003c\/li\u003e\n  \u003cli\u003eAfter sealing with MN Stain-Stop, switch to Easy-Clean exclusively; alkaline cleaners can shorten sealer life by 15 % if overused.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880117743948,"sku":"238-11-B","price":30.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/238.webp?v=1772467439"},{"product_id":"lithofin-mn-easy-clean-spray","title":"Lithofin MN Easy-Clean","description":"\u003cp\u003eSplash marks on your marble kitchen countertop, greasy fingerprints on the quartz island, water rings on the limestone vanity-daily mess builds up fast. Lithofin MN Easy-Clean removes that film in seconds, so you wipe once and move on.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Easy-Clean Does\u003c\/h2\u003e\n\u003cp\u003eMN Easy-Clean is a neutral maintenance cleaner for natural stone, quartz, and ceramic. With a pH of 7.5 it stays within the safe zone for acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e. Mild surfactants lift fats, soap scum, and light limescale up to 0.1 mm thick; alcohol flashes off in under 60 seconds, leaving no streaks. Ready-to-use strength means 0 dilution errors and uniform cleaning power every time.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble kitchen countertop spot cleaning - 1:1 ready spray for 50 ml\/m² (\u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eGranite sink surround after food prep - 1:1 ready spray for 70 ml\/m²\u003c\/li\u003e\n\u003cli\u003eLimestone bathroom vanity to remove toothpaste splatter - 1:1 ready spray for 80 ml\/m²\u003c\/li\u003e\n\u003cli\u003eGlass-mosaic backsplash degreasing - 1:1 ready spray for 100 ml\/m² (\u003ca href=\"\/en-mt\/pages\/stone-glass-mosaic\"\u003eglass mosaic\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003ePorcelain coffee table rings - 1:1 ready spray for 60 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle once and hold the nozzle 15 cm from the surface.\u003c\/li\u003e\n\u003cli\u003eSpray a thin, even film-approximately 10 pumps per 1 m².\u003c\/li\u003e\n\u003cli\u003eWipe immediately with a clean microfiber cloth, folding the cloth to expose fresh sections.\u003c\/li\u003e\n\u003cli\u003eBuff dry with the second side of the cloth; no rinsing required.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCovers 50-100 ml\/m², so a 500 ml bottle treats 5-10 m². Surface is food-safe as soon as it is touch-dry-usually 1 minute at 20 °C. Reapply as often as you like; the neutral formulation will not build residue.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eUse confidently on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz composite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, slate, basalt, and terrazzo because the non-acidic formula will not etch or open pores. It also works on porcelain and ceramic tiles. The pH-neutral base protects acid-sensitive surfaces such as marble and limestone while removing everyday grime. Do not use Easy-Clean for large floor areas; switch to MN Wash \u0026amp; Clean for economy.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor bucket-mopping broad floors, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e (dilute 1:100). For long-term oil and wine protection, seal with \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. Easy-Clean stays on standby for quick countertop wipe-downs.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeep two microfiber cloths: one for the initial wipe, one for the final buff; this halves streak risk.\u003c\/li\u003e\n\u003cli\u003eWarm the cloth under hot water, wring out, then wipe-heat speeds evaporation by 15 % and leaves zero shadowing.\u003c\/li\u003e\n\u003cli\u003eOn heavily used café bars, finish with a pass of MN Stain-Stop every six months; the sealer reduces next-day staining by up to 90 %.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880117940556,"sku":"189-21-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"500 ml spray","offer_id":56880117973324,"sku":"189-21-B","price":18.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580552524,"sku":"189-21-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/189_c2dbee99-7341-4db6-b2c5-303ebbd95696.webp?v=1772467417"},{"product_id":"lithofin-mn-care-sheen","title":"Lithofin MN Care-Sheen","description":"\u003cp\u003eYour polished marble living-room floor looks flat, traffic lanes appear grey, and damp mopping no longer brings back the shine. Care-Sheen corrects that in one pass, leaving a micro-thin gloss film that dries in minutes and resists scuffing for up to 12 weeks.\u003c\/p\u003e\n\u003ch2\u003eWhat Care-Sheen Does\u003c\/h2\u003e\n\u003cp\u003eCare-Sheen is a neutral maintenance finish for natural stone and ceramic surfaces. The pH-8 polymer dispersion bonds to microscopic pores, forming a 0.5 µm film that raises light reflectance by 25 %. Undiluted use covers 20 m² per litre; a 1:10 dilution stretches coverage to 200 m², ideal for low-traffic granite.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e foyer losing gloss - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eBathroom porcelain tiles with water spotting - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eGranite kitchen island that sees occasional cutting - dilute 1:10, 10 ml\/m².\u003c\/li\u003e\n\u003cli\u003eNewly honed limestone hallway after first seal - use undiluted, 50 ml\/m².\u003c\/li\u003e\n\u003cli\u003eRough commercial granite lobby needing quick shine - dilute 1:10, 10 ml\/m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake bottle for 30 s, then pour required quantity into a clean bucket.\u003c\/li\u003e\n\u003cli\u003eDip a lint-free mop or soft cloth, wring lightly, and spread in a thin, even film.\u003c\/li\u003e\n\u003cli\u003eDo not rework drying sections; allow surface to air-dry for 30 min.\u003c\/li\u003e\n\u003cli\u003eOptional: buff with a white pad after 60 min to heighten gloss by a further 10 %.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eUndiluted coverage: 20 m²\/L. Diluted 1:10 coverage: 200 m²\/L. No rinsing. Floor is walkable once dry; full film hardens after 2 h.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eCare-Sheen performs best on polished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e, and glazed \u003ca href=\"\/en-mt\/pages\/stone-ceramic\"\u003eceramic\u003c\/a\u003e because its neutral pH does not attack acid-sensitive calcite while the polymer anchors well in low-porosity substrates. It also suits limestone, bluestone, basalt, glass-mosaic, quartz-composite, and terrazzo. Do not use on outdoor slabs or any surface that must remain water-vapour open.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term stain protection, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e before Care-Sheen. For day-to-day cleaning between gloss refreshes, mop with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e at 20 ml per 10 L water.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways clean with a pH-neutral detergent like Wash \u0026amp; Clean first; dirt trapped under the film dulls reflectance by up to 40 %.\u003c\/li\u003e\n\u003cli\u003eApply two thin coats instead of one heavy coat on porous limestone; this prevents streaks and improves wear resistance by 30 %.\u003c\/li\u003e\n\u003cli\u003eBuffing with a high-speed machine (1500 rpm) after drying compresses the film, making it more scratch-resistant on Mohs-7 granite.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118071628,"sku":"172-11-B","price":19.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118104396,"sku":"172-11-B","price":62.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401580618060,"sku":"172-11-B-DOOS-10","price":172.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/172.webp?v=1772467387"},{"product_id":"lithofin-mn-care-bluestone","title":"Lithofin MN Care for Bluestone","description":"\u003cp\u003eYour newly laid bluestone hallway quickly dulls under daily shoes and grit. Mop water leaves streaks, and colour depth fades week by week. MN Blauwe Hardsteen Onderhoud ends that cycle with a single 20 ml dose in a bucket.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Blauwe Hardsteen Onderhoud Does\u003c\/h2\u003e\n\u003cp\u003eMN Blauwe Hardsteen Onderhoud is a neutral maintenance cleaner for \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e and other natural stone. At pH 8 it suspends greasy films with non-ionic surfactants while replenishing the stone’s micro-pores with care additives that boost colour by up to 15 % reflectance. The 1:500 solution leaves no alkaline residue, so acid-sensitive limestone stays unharmed.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFreshly installed bluestone floors in kitchens - dilute 20 ml\/10 L for daily maintenance (\u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003edaily-maintenance\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eMatting entryways on \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e - 40 ml\/10 L for fortnightly refresh\u003c\/li\u003e\n\u003cli\u003eLight grease on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e worktops - 10 ml\/5 L wipe-down\u003c\/li\u003e\n\u003cli\u003eSoap film on \u003ca href=\"\/en-mt\/pages\/stone-porcelain\"\u003eporcelain\u003c\/a\u003e shower walls - 25 ml\/10 L spray application\u003c\/li\u003e\n\u003cli\u003eDusty \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e patio after rain - 30 ml\/10 L mop rinse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFill a clean bucket with 10 L warm water and add exactly 20 ml (≈ 2 caps) of product.\u003c\/li\u003e\n\u003cli\u003eImmerse a flat microfibre mop, wring to damp, and distribute evenly over 15 - 20 m².\u003c\/li\u003e\n\u003cli\u003eAllow a 3-minute contact time; do not let the surface dry during this phase on heavily soiled zones.\u003c\/li\u003e\n\u003cli\u003eNo rinsing is required; let the floor air-dry to a streak-free finish within 15 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage coverage equals 2 ml\/m²; one 1 L bottle treats about 500 m². Re-apply whenever the surface loses its silk sheen.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on bluestone, basalt, and low-porosity \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e because its pH 8 blend will not etch calcite. It remains safe on medium-porosity marble, sandstone, and quartz-composite as the surfactants rinse residue-free. High-porosity cotto and terracotta accept the product but may need a second pass to avoid absorbed water. Do not use on oiled wood or unsealed metal.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stubborn wax or construction grime, switch to MN Power-Clean at 1:5 dilution (\u003ca href=\"\/en-mt\/pages\/problem-general-cleaning\"\u003egeneral-cleaning\u003c\/a\u003e). For ongoing neutral care on mixed stone and tile surfaces, MN Wash \u0026amp; Clean offers a broader fragrance but less colour enhancement.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd warm (40 °C) water; higher temperature cuts fatty deposits 20 % faster.\u003c\/li\u003e\n\u003cli\u003eUse two-bucket mopping on porous \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e to prevent redepositing soil.\u003c\/li\u003e\n\u003cli\u003eBuff dry with a white pad on polished marble to raise gloss by an extra 5 GU (gloss units).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118235468,"sku":"389-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118268236,"sku":"389-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582092620,"sku":"389-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/389-1l.webp?v=1781186703"},{"product_id":"lithofin-mn-wash-and-clean","title":"Lithofin MN Wash \u0026 Clean","description":"\u003cp\u003eYour polished marble foyer shows every footprint and drop of mop water. Daily traffic dulls the gloss, yet harsh cleaners risk etching. Lithofin MN Wash \u0026amp; Clean ends the trade-off: one capful in the bucket, streak-free stone in minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat Wash \u0026amp; Clean Does\u003c\/h2\u003e\n\u003cp\u003eWash \u0026amp; Clean is a pH-neutral maintenance cleaner for all natural stone. Non-ionic surfactants lift grease, soap, and street dirt without breaking down calcium-no risk for Mohs-3 marble. The 1:250 concentrate leaves an invisible care component that enhances colour and slows re-soiling for up to 48 hours.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePolished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e entrance halls - dilute 2 capfuls\/5 L for 150 m² coverage.\u003c\/li\u003e\n\u003cli\u003eRough \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen floors - 2 capfuls\/5 L remove grease films, 100 m²\/L.\u003c\/li\u003e\n\u003cli\u003eLimestone vanity tops in bathrooms - 1 capful\/5 L for light soap residue, 200 m²\/L.\u003c\/li\u003e\n\u003cli\u003eQuartz-composite worktops - wipe with 1 capful\/5 L, no rinse, excellent gloss retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003eDaily-maintenance\u003c\/a\u003e on mixed stone areas - 1-2 capfuls\/5 L keeps grout joints bright.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eFill a clean bucket with 5 L warm water and add 1-2 capfuls (20-40 ml) concentrate.\u003c\/li\u003e\n\u003cli\u003eSoak a microfiber mop, wring until damp-not dripping.\u003c\/li\u003e\n\u003cli\u003eWork in 10 m² sections, rinsing the mop regularly in the same solution.\u003c\/li\u003e\n\u003cli\u003eAllow the surface to air-dry; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 100-200 m² per litre of concentrate, equal to 50-100 buckets. Floor is walkable as soon as it is dry-usually under 10 minutes at 20 °C.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe neutral pH 7 formula will not etch acid-sensitive stones such as \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, or \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e. Low-foam surfactants rinse off fully, so pores in high-porosity \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e stay open. Safe on hard stones like basalt and slate, and acceptable on porcelain or ceramic, though KF Conditioning Cleaner is optimised for those. No restricted surfaces.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor intensive restoration of oily or waxy build-up, switch to \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e at 1:5. For long-term stain resistance, seal with \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e after deep cleaning. Use Wash \u0026amp; Clean afterwards to preserve both finishes.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChange the solution after 75 m²; dirty water redeposits soil and dulls gloss.\u003c\/li\u003e\n\u003cli\u003eUse a two-bucket method on honed limestone to avoid grey streaks-one for washing, one for wringing.\u003c\/li\u003e\n\u003cli\u003eAdd 40 °C water in winter; higher temperature reduces surface tension by 15 % and lifts road salt faster.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118333772,"sku":"173-11-B","price":15.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118366540,"sku":"173-11-B","price":54.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582125388,"sku":"173-11-B-DOOS-10","price":141.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/173.webp?v=1772467389"},{"product_id":"lithofin-mn-easy-clean-kitchen-care-set","title":"Lithofin MN Easy-Clean Kitchen Care Set","description":"\u003cp\u003eYour marble island shows greasy fingerprints after every meal prep, the granite splashback catches tomato sauce, and the limestone windowsill collects dust. The MN Easy Clean Kitchen Care Set solves all three messes in one spray-and-wipe pass.\u003c\/p\u003e\n\u003ch2\u003eWhat Easy Clean Does\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Clean\u003c\/strong\u003e is a neutral daily cleaner for natural stone and engineered kitchen surfaces. The pH 7.0 formula dissolves fresh grease with non-ionic surfactants at 1 g\/L, lifts sugar and protein residues in 30 seconds, and evaporates without streaks. No acids or alkalis means zero etching on Mohs-3 marble while still breaking down cooking oil at 20 mg\/cm².\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMarble counters after food prep - use undiluted, one trigger pull per 0.1 m². \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003eMarble care page\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGranite splashbacks with dried sauce - spray undiluted, dwell 30 s, wipe. \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003eGranite details\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eQuartz-composite breakfast bar for daily-maintenance - two sprays per 0.2 m². \u003ca href=\"\/en-mt\/pages\/problem-daily-maintenance\"\u003eDaily maintenance tips\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePorcelain hobs before sealing with \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e - clean undiluted.\u003c\/li\u003e\n\u003cli\u003eCotto windowsills collecting dust - light mist, wipe dry. \u003ca href=\"\/en-mt\/pages\/stone-cotto\"\u003eCotto info\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eShake the bottle, hold nozzle 20 cm from the surface, and spray a fine mist. Dilution: none.\u003c\/li\u003e\n\u003cli\u003eSpread evenly with a microfiber cloth folded into quarters; work 1 m² at a time.\u003c\/li\u003e\n\u003cli\u003eWait 30 seconds for the surfactants to loosen grime.\u003c\/li\u003e\n\u003cli\u003eFlip cloth to a dry side and buff until the surface is touch-dry.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAverage consumption: 50 m² per litre (≈500 trigger pulls). No drying time-surface is food-safe immediately after wiping.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eOn acid-sensitive \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, the neutral pH prevents etch marks; on low-porosity \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, the micro-emulsion lifts films without leaving a residue. Excellent results on sandstone, slate, porcelain, and glass-mosaic. Do not use on unsealed wood or lacquered furniture.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term stain protection, follow with \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For weekly mop cleaning of larger tiled areas, switch to \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFold the microfiber cloth into eight clean faces; one face covers about 0.5 m² before saturation.\u003c\/li\u003e\n\u003cli\u003eWarm water (30 °C) on the cloth accelerates grease breakup by 15 % when tackling heavy splatters.\u003c\/li\u003e\n\u003cli\u003eBuff granite after wiping to raise gloss by up to 5 GU (gloss units) measured at 60°.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118464844,"sku":"235-11-B","price":33.95,"currency_code":"EUR","in_stock":false}]},{"product_id":"lithofin-care-kit-natural-stone-kitchen","title":"Lithofin MN Care Set for Natural Stone Kitchen (Re-sealing)","description":"\u003cp\u003eYour polished kitchen island has lost its original sheen, the splash zone behind the sink shows water spots, and the bathroom vanity picks up fingerprints every day. The Care Kit LE brings three MN products together to clean, protect, and refresh all in one box.\u003c\/p\u003e\n\u003ch2\u003eWhat Care Kit LE Does\u003c\/h2\u003e\n\u003cp\u003eCare Kit LE is a neutral maintenance kit for natural stone. MN Easy-Clean (pH 7) removes daily grime and limescale with mild surfactants that leave no streaks. MN Power-Clean (pH 10) cuts through oily films and wax residues by breaking long-chain fatty acids within 10 minutes. MN Stain-Stop (pH 6) impregnates the pore structure and lowers water absorption by 90 % while allowing 98 % vapor diffusion.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDaily wipe-down of a \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e vanity - 1:20 dilution MN Easy-Clean.\u003c\/li\u003e\n\u003cli\u003eWeekly mop of a \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e kitchen floor - 1:40 dilution MN Easy-Clean.\u003c\/li\u003e\n\u003cli\u003eSpring deep clean of a \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e patio - 1:4 dilution MN Power-Clean.\u003c\/li\u003e\n\u003cli\u003eAnnual sealing of a \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e shower wall - undiluted MN Stain-Stop.\u003c\/li\u003e\n\u003cli\u003eSpot protection on a \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e hearth after repairs - undiluted MN Stain-Stop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSpray MN Easy-Clean, wipe with a microfibre cloth, allow to flash-off for PT2M.\u003c\/li\u003e\n\u003cli\u003eFor heavy build-up, spread MN Power-Clean 1:4 with a white pad, agitate for PT10M, rinse twice.\u003c\/li\u003e\n\u003cli\u003eLet the surface dry to \u0026lt;3 % moisture (approx. PT2H), then spread MN Stain-Stop evenly with a lambswool applicator.\u003c\/li\u003e\n\u003cli\u003eAfter PT15M, buff off surplus with an absorbent towel to avoid gloss variations.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTypical coverage: Easy-Clean 30-40 m²\/L, Power-Clean 12 m²\/L, Stain-Stop 10-20 m²\/L. Full curing of the impregnator takes 24 h; keep the area dry during this time.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe kit excels on porous stones such as \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because the neutral pH cleaners will not etch acid-sensitive calcite while the solvent carrier in Stain-Stop penetrates micro-capillaries without closing them. Do not use Power-Clean on polished aluminium fittings.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stripping old acrylic coatings, use Lithofin WAX-OFF. For cement-film removal after grouting, choose Lithofin MN Builder’s Clean; Care Kit LE handles ongoing maintenance and stain protection.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDamp-wipe with Easy-Clean before sealing; a residue-free surface increases Stain-Stop uptake by up to 15 %.\u003c\/li\u003e\n\u003cli\u003eWarm the stone to 20 °C before impregnation; higher temperature lowers viscosity and boosts penetration depth.\u003c\/li\u003e\n\u003cli\u003eBuff Stain-Stop twice at 5-minute intervals; the second pass eliminates any shadowing on high-polish marble.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118497612,"sku":"227-75-B","price":63.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/227.webp?v=1772467436"},{"product_id":"lithofin-care-kit-composiet","title":"Lithofin MN Care Set for Natural Stone \u0026 Quartz Composite Countertops","description":"\u003cp\u003eYour marble kitchen island shows dull grease shadows and sticky fingerprints after every meal prep. Water alone leaves streaks, and harsh products risk etching the stone. The MN Care Kit ends the cycle with one alkaline deep cleaner and one neutral daily spray tailored to natural and composite worktops.\u003c\/p\u003e\n\n\u003ch2\u003eWhat MN Care Kit Does\u003c\/h2\u003e\n\u003cp\u003eMN Care Kit is a two-part system: MN Vuiloplosser is an alkaline cleaner (pH 11) that dissolves grease, wax, and soap scum; MN Easy-Clean is a neutral maintenance spray (pH 7.5) that lifts fresh spills and buffs to a streak-free finish. The first breaks down polymerised kitchen residues within 10 minutes; the second encapsulates light dirt with non-ionic surfactants and evaporates in 2 minutes, leaving no film.\u003c\/p\u003e\n\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eGreasy \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e hob surrounds - dilute MN Vuiloplosser 1:10.\u003c\/li\u003e\n  \u003cli\u003eEtch-sensitive \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e breakfast bars - spray MN Easy-Clean undiluted.\u003c\/li\u003e\n  \u003cli\u003eStained \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e sinks after red-wine night - soak with Vuiloplosser 1:5.\u003c\/li\u003e\n  \u003cli\u003eDaily wipe-downs of limestone splashbacks - one trigger pull of Easy-Clean per 0.5 m².\u003c\/li\u003e\n  \u003cli\u003ePre-sealing wash before applying \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e - Vuiloplosser 1:20.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eDilute MN Vuiloplosser with warm water (1:10 for routine, 1:5 for heavy soil) and spread with a white pad.\u003c\/li\u003e\n  \u003cli\u003eWork the solution for 5 minutes, keep wet, then rinse twice with clean water.\u003c\/li\u003e\n  \u003cli\u003eFor daily care, spray MN Easy-Clean directly on the cool surface and wipe with a microfibre cloth.\u003c\/li\u003e\n  \u003cli\u003eBuff dry; surface is food-safe after 2 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOne litre of diluted Vuiloplosser covers 20 m²; a 500 ml Easy-Clean bottle treats about 40 m². No curing time required.\u003c\/p\u003e\n\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe kit scores excellent on \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-quartz-composite\"\u003equartz-composite\u003c\/a\u003e because the alkaline formula lifts organic grime without acid that would etch soft Mohs 3 stones, while the neutral spray leaves no salt deposits on low-porosity substrates. Do not use the alkaline component on polished aluminium appliances.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor stain blocking after cleaning, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e. For restoring worn gloss on dark granite, finish with \u003ca href=\"\/en-mt\/products\/lithofin-mn-polish\"\u003eMN Polish Liquid\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHeat accelerates evaporation; cool the worktop to below 25 °C before using Easy-Clean to avoid streaks.\u003c\/li\u003e\n  \u003cli\u003eUse a white melamine pad with Vuiloplosser to reach the microscopic pits of sandstone-laboratory tests show 20 % higher soil removal.\u003c\/li\u003e\n  \u003cli\u003eAfter sealing with MN Stain-Stop, switch to Easy-Clean exclusively; alkaline cleaners can shorten sealer life by 15 % if overused.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118595916,"sku":"238-75-B","price":71.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/238_ca6bf799-daa7-4a33-b9bb-05b45a32b134.webp?v=1772467442"},{"product_id":"lithofin-mn-colour-intensifier","title":"MN Colour Intensifier for rough, absorbent natural and artificial Stone","description":"\u003cp\u003eYour freshly laid slate kitchen floor looked rich and vibrant at first, but a few weeks of traffic have left the surface looking pale and dusty. One thin coat of MN Colour Intensifier restores the deep charcoal tone while guarding against stains for up to five years.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Colour Intensifier Does\u003c\/h2\u003e\n\u003cp\u003eMN Colour Intensifier is a neutral solvent-based impregnator for rough, absorbent natural stone. Resins penetrate 2-4 mm, bind to pore walls, and raise light absorption, so colours read 20-40 % darker. The carrier flashes off in 30 minutes, leaving a breathable layer that repels water and oil to 0.5 µL contact angle.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHoned granite countertops - ready to use, 50 ml\/m²\u003c\/li\u003e\n\u003cli\u003eTumbled travertine bathroom walls - ready to use, 40 ml\/m²\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003eSandstone\u003c\/a\u003e patio slabs before sealing - ready to use, 80 ml\/m²\u003c\/li\u003e\n\u003cli\u003eInterior \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e floors after deep cleaning - ready to use, 60 ml\/m²\u003c\/li\u003e\n\u003cli\u003eFaded bluestone hearths - ready to use, 55 ml\/m²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the surface with \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e; rinse and let dry 24 h.\u003c\/li\u003e\n\u003cli\u003ePour MN Colour Intensifier into a paint tray; do not dilute.\u003c\/li\u003e\n\u003cli\u003eUsing a lint-free cloth, wipe a thin, even film, about 50 ml\/m², keeping a wet edge. Time: 5 min per m².\u003c\/li\u003e\n\u003cli\u003eAfter 15 min, buff off surplus with a white pad to prevent gloss patches.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCoverage: 10-30 m²\/L depending on porosity. Full colour develops after 24 h; avoid moisture during this period.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe formula excels on \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003egranite\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-sandstone\"\u003esandstone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, \u003ca href=\"\/en-mt\/pages\/stone-slate\"\u003eslate\u003c\/a\u003e, and \u003ca href=\"\/en-mt\/pages\/stone-bluestone\"\u003ebluestone\u003c\/a\u003e because it fills medium-to-high porosity without forming a surface film, so the stone keeps its matte texture. The neutral pH means no etching on acid-sensitive marble or limestone. Do not use on polished marble, already colour-treated stone, or where a pale, natural look is required.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor routine washing after treatment, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. For removing construction dirt before intensifying, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-power-clean\"\u003eMN Power-Clean\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWork in 5 m² sections; this keeps wet-edge time under 5 minutes and prevents lap marks.\u003c\/li\u003e\n\u003cli\u003eWarm stone (18-25 °C) absorbs 15 % more product than cold stone, giving a stronger colour pop.\u003c\/li\u003e\n\u003cli\u003eReapply after high-pressure washing outdoors; UV and water accelerate fade to 50 % after 4 years.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"1 liter","offer_id":56880118661452,"sku":"167-11-B","price":29.95,"currency_code":"EUR","in_stock":false},{"title":"5 liter","offer_id":56880118694220,"sku":"167-11-B","price":94.95,"currency_code":"EUR","in_stock":false},{"title":"1 liter (doos van 10)","offer_id":57401582190924,"sku":"167-11-B-DOOS-10","price":261.18,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/167.webp?v=1772467374"},{"product_id":"lithofin-mn-polish","title":"Lithofin MN Polish","description":"\u003cp\u003eYour polished marble countertop shows dull rings around the sink. Drinks splashes have etched the surface and standard cleaners leave it lifeless. Lithofin MN Polish Cream erases those marks and restores the mirror-like finish in minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Polish Cream Does\u003c\/h2\u003e\n\u003cp\u003eMN Polish Cream is a neutral cream polish for polished, calcareous stone. With a pH of 7.0 and micro-abrasives rated Mohs 2.5, it gently abrades the dulled calcium carbonate layer, fills microscopic pores with wax, and immediately raises surface gloss by up to 20 GU.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEtch rings on a \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e vanity - use neat, rub 10 g per ring.\u003c\/li\u003e\n\u003cli\u003eDull splash zone behind a kitchen faucet - apply neat, 1 g per cm².\u003c\/li\u003e\n\u003cli\u003eEdge wear on polished \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e stair treads - use neat, 30 g per tread.\u003c\/li\u003e\n\u003cli\u003eSmall terrazzo table top losing shine - apply neat, 15 g per 0.2 m².\u003c\/li\u003e\n\u003cli\u003eAfter deep clean with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e - final buff, 20 g per 0.3 m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSqueeze a hazelnut-sized dot of cream onto the mark. Time: PT5M\u003c\/li\u003e\n\u003cli\u003eRub with a soft cloth or felt pad in tight circles until the spot dries matte. Time: PT5M\u003c\/li\u003e\n\u003cli\u003eBuff the area with a clean cloth until a high gloss appears. Time: PT5M\u003c\/li\u003e\n\u003cli\u003eWipe off residue with MN Wash \u0026amp; Clean solution (1:200) and dry. Time: PT5M\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCumulative coverage averages 5 g per 0.1 m². Gloss is visible immediately; full cure of the wax component takes 30 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe cream excels on polished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, polished \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, and polished \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because the Mohs 2.5 abrasive is softer than these stones, removing damage without scratching. The neutral formula will not etch acid-sensitive calcium carbonate. Do not use on granite, honed finishes, ceramic, or porcelain.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor colour deepening without extra gloss, use Lithofin MN Color-Intensifier. For routine cleaning at pH 10, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. Select MN Polish Cream when a glossy surface is the primary goal.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways pre-clean with MN Wash \u0026amp; Clean; dirt particles harder than Mohs 3 can create micro-scratches.\u003c\/li\u003e\n\u003cli\u003eWork small areas; heat from friction aids the wax flow and shortens polishing time to under 3 minutes.\u003c\/li\u003e\n\u003cli\u003eFinish with a microfibre cloth; its 0.3 µm fibres lift residual wax, maximising gloss by an extra 5 GU.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118825292,"sku":"171-21-EU","price":23.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/171.webp?v=1772467380"},{"product_id":"lithofin-mn-polish-cr-me","title":"Lithofin MN Polish","description":"\u003cp\u003eYour polished marble countertop shows dull rings around the sink. Drinks splashes have etched the surface and standard cleaners leave it lifeless. Lithofin MN Polish Cream erases those marks and restores the mirror-like finish in minutes.\u003c\/p\u003e\n\u003ch2\u003eWhat MN Polish Cream Does\u003c\/h2\u003e\n\u003cp\u003eMN Polish Cream is a neutral cream polish for polished, calcareous stone. With a pH of 7.0 and micro-abrasives rated Mohs 2.5, it gently abrades the dulled calcium carbonate layer, fills microscopic pores with wax, and immediately raises surface gloss by up to 20 GU.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEtch rings on a \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e vanity - use neat, rub 10 g per ring.\u003c\/li\u003e\n\u003cli\u003eDull splash zone behind a kitchen faucet - apply neat, 1 g per cm².\u003c\/li\u003e\n\u003cli\u003eEdge wear on polished \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e stair treads - use neat, 30 g per tread.\u003c\/li\u003e\n\u003cli\u003eSmall terrazzo table top losing shine - apply neat, 15 g per 0.2 m².\u003c\/li\u003e\n\u003cli\u003eAfter deep clean with \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e - final buff, 20 g per 0.3 m².\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSqueeze a hazelnut-sized dot of cream onto the mark. Time: PT5M\u003c\/li\u003e\n\u003cli\u003eRub with a soft cloth or felt pad in tight circles until the spot dries matte. Time: PT5M\u003c\/li\u003e\n\u003cli\u003eBuff the area with a clean cloth until a high gloss appears. Time: PT5M\u003c\/li\u003e\n\u003cli\u003eWipe off residue with MN Wash \u0026amp; Clean solution (1:200) and dry. Time: PT5M\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eCumulative coverage averages 5 g per 0.1 m². Gloss is visible immediately; full cure of the wax component takes 30 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe cream excels on polished \u003ca href=\"\/en-mt\/pages\/stone-marble\"\u003emarble\u003c\/a\u003e, polished \u003ca href=\"\/en-mt\/pages\/stone-limestone\"\u003elimestone\u003c\/a\u003e, and polished \u003ca href=\"\/en-mt\/pages\/stone-terrazzo\"\u003eterrazzo\u003c\/a\u003e because the Mohs 2.5 abrasive is softer than these stones, removing damage without scratching. The neutral formula will not etch acid-sensitive calcium carbonate. Do not use on granite, honed finishes, ceramic, or porcelain.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor colour deepening without extra gloss, use Lithofin MN Color-Intensifier. For routine cleaning at pH 10, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. Select MN Polish Cream when a glossy surface is the primary goal.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlways pre-clean with MN Wash \u0026amp; Clean; dirt particles harder than Mohs 3 can create micro-scratches.\u003c\/li\u003e\n\u003cli\u003eWork small areas; heat from friction aids the wax flow and shortens polishing time to under 3 minutes.\u003c\/li\u003e\n\u003cli\u003eFinish with a microfibre cloth; its 0.3 µm fibres lift residual wax, maximising gloss by an extra 5 GU.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118890828,"sku":"171-06-EU","price":14.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/171_264c73d1-691b-46d5-b233-bc09f19e4c85.webp?v=1772467383"},{"product_id":"lithofin-mn-polish-cream-black","title":"Lithofin MN Polish Cream Black","description":"\u003cp\u003eYour polished black granite countertop in the kitchen used to reflect light like a mirror, but daily wiping leaves dull smears and tiny water spots. Lithofin MN Polish Crème -zwart- restores that deep, inky shine in one quick application, sealing micro-scratches and boosting water repellency.\u003c\/p\u003e\n\u003ch2\u003eWhat Polish Crème Does\u003c\/h2\u003e\n\u003cp\u003ePolish Crème is a neutral maintenance polish for dark \u003ca href=\"\/en-mt\/pages\/stone-granite\"\u003enatural stone\u003c\/a\u003e. With a pH of 7.5 it lays down micro-thin wax and silicone resins that fill pores ≤0.2 µm and harden immediately. The black pigment masks minute abrasions, while the hydrophobic film raises water contact angle to 95 ° within 10 minutes, so spills bead instead of soaking in.\u003c\/p\u003e\n\u003ch2\u003eWhen to Use\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eBlack granite vanity tops - apply undiluted, 100 ml\/m².\u003c\/li\u003e\n  \u003cli\u003ePolished basalt window sills - apply undiluted, 100 ml\/m².\u003c\/li\u003e\n  \u003cli\u003eSmall marble shelves that lost gloss - apply undiluted, 100 ml\/m², expect extra buffing.\u003c\/li\u003e\n  \u003cli\u003eSlate bathroom ledges after deep cleaning - apply undiluted, 100 ml\/m² to renew sheen.\u003c\/li\u003e\n  \u003cli\u003eFollow-up to \u003ca href=\"\/en-mt\/pages\/problem-stain-protection\"\u003estain-protection\u003c\/a\u003e treatments - use undiluted after surface has cured 48 h.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Apply\u003c\/h2\u003e\n\u003col\u003e\n  \u003cli\u003eShake the bottle 10 seconds, then pour a hazelnut-sized amount onto a soft cotton cloth.\u003c\/li\u003e\n  \u003cli\u003eMassage the cream over 1 m² in tight circles for 60 seconds.\u003c\/li\u003e\n  \u003cli\u003eLet the film haze for 2 minutes, then buff with a clean microfiber until the cloth glides freely.\u003c\/li\u003e\n  \u003cli\u003eFor higher gloss, repeat once after 15 minutes; do not rinse.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eYou cover 10 m² per litre (≈5 m² per 500 ml). Surface can be used immediately; full water repellency reaches peak after 30 minutes.\u003c\/p\u003e\n\u003ch2\u003eSurface Compatibility\u003c\/h2\u003e\n\u003cp\u003eGranite and \u003ca href=\"\/en-mt\/pages\/stone-basalt\"\u003ebasalt\u003c\/a\u003e score Mohs 7 and accept the wax matrix without colour shift, giving an “excellent” rating. Polished marble, slate and bluestone score Mohs 3-4; the neutral formula will not etch them, but you may need extra hand-buffing to close their medium porosity. Do not use on honed, unpolished or rough stone, as the cream will streak.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Product\u003c\/h2\u003e\n\u003cp\u003eFor long-term oil and wine protection, use \u003ca href=\"\/en-mt\/products\/lithofin-mn-stain-stop\"\u003eMN Stain-Stop\u003c\/a\u003e first. For routine weekly washing, switch to \u003ca href=\"\/en-mt\/products\/lithofin-mn-wash-and-clean\"\u003eMN Wash \u0026amp; Clean\u003c\/a\u003e. Polish Crème sits between the two: it renews gloss and adds short-term repellency.\u003c\/p\u003e\n\u003ch2\u003ePro Tips\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eWarm the stone to 20-25 °C with a hairdryer; the cream spreads 25 % farther and buffs faster.\u003c\/li\u003e\n  \u003cli\u003eUse a white non-abrasive pad on edges; it applies even pressure, preventing darker streaks.\u003c\/li\u003e\n  \u003cli\u003eApply a second coat only after the first coat turns fully transparent; this doubles the water contact angle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lithofin","offers":[{"title":"standaard","offer_id":56880118956364,"sku":"176-21-EU","price":28.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1037\/6485\/3068\/files\/lithofin-mn-politoer-creme.jpg?v=1781188983"}],"url":"https:\/\/ixstone.com\/en-mt\/collections\/lithofin-mn.oembed","provider":"adh23084u","version":"1.0","type":"link"}