Resin Removal - Expert Removal & Treatment Guide
Resin Removal - Expert Removal & Treatment Guide
What is Resin Removal?
Resin, epoxy, and adhesive residues can be challenging to remove from stone and tile surfaces. These substances can bond strongly to the surface, creating a sticky or glossy film that detracts from the natural beauty of the material. If not addressed promptly, the residues can harden and become even more difficult to remove. The presence of these residues can also interfere with the application of sealants and other surface treatments, leading to unsatisfactory results.
How to Identify It
Resin and adhesive residues typically appear as a glossy or sticky film on the surface. To diagnose, run your finger across the area; if it feels tacky or leaves a residue on your finger, it is likely resin or adhesive. These residues may also trap dust and dirt, making the surface appear dull or dirty.
Common Causes
- Use of adhesives during tile or stone installation
- Spills from resin-based products during construction or renovation
- Improper cleaning methods that leave residues behind
- Allowing resin or adhesive to cure on the surface
- Inadequate surface preparation before applying adhesives
Prevention
- Clean up spills immediately to prevent hardening
- Use protective coverings on surfaces when working with adhesives
- Choose low-residue adhesives when possible
- Follow manufacturer's instructions for adhesive application and removal
- Conduct a test area before applying adhesives to ensure compatibility with the surface
Treatment by Surface Type
Natural Stone
Risk level: Medium
Use Lithofin Resin-EX. Apply Resin-EX according to the manufacturer's instructions. Allow it to penetrate the residue for the recommended time before scrubbing with a non-abrasive pad and rinsing thoroughly.
- Use Lithofin Resin-EX
Ceramics
Risk level: Medium
Use Lithofin Ceramic-Clean. Use Ceramic-Clean to remove resin and adhesive residues. Spray on the affected area, let it sit for a few minutes, then scrub gently with a soft cloth or sponge and rinse with water.
- Use Lithofin Ceramic-Clean
Artificial Stone
Risk level: Medium
Use Lithofin OIL-EX. For artificial stone surfaces, apply OIL-EX directly onto the residue. Allow it to work for the specified time, then wipe away with a clean cloth and rinse the area with water.
- Use Lithofin OIL-EX
Cotto Terracotta
Risk level: Medium
Use Lithofin Easy-Clean. Use Easy-Clean on cotto or terracotta surfaces to effectively remove resin and adhesive residues. Apply the cleaner, let it sit briefly, scrub with a soft brush, and rinse well.
- Use Lithofin Easy-Clean
When to Call a Professional
If the problem persists after two treatment attempts, or if the affected area is large (>10m²), consult a professional stone restorer.
Find the right product
Use our Lithofinder to get a personalised product recommendation for your specific surface and problem.