Green by Lithofin Sanitary Cleaner

Your shower walls look dull, the glass is streaked, and stubborn soap scum clings to every joint. Daily wipes no longer shift the calcium-rich film. Green by Lithofin Sanitary Cleaner ends the cycle in one ready-to-use spray.

What Sanitary Cleaner Does

Sanitary Cleaner is an acidic cleaner for bathroom hard surfaces. A pH 2.4 formula dissolves calcium carbonate, magnesium salts, and fatty soap residues within 60 seconds. Biodegradable citric and lactic acids break mineral bonds; non-ionic surfactants lift the loosened dirt so you wipe it away in one pass.

When to Use

• Shower cubicles in family bathrooms - ready to use 100 %, rinse after 1 min.
• Porcelain wall tiles covered in limescale - ready to use, wipe after 2 min.
• Glass shower doors with water marks - ready to use, polish off immediately.
• Ceramic vanity splashbacks with soap scum - ready to use, short dwell then rinse.
• Weekly general bathroom cleaning - ready to use, no dilution.

How to Apply

1. Spray a uniform film from 20 cm distance onto the cool surface.
2. Spread with a damp sponge; allow 60-120 seconds contact time.
3. Agitate stubborn deposits with a white nylon pad.
4. Rinse thoroughly with clean water; squeegee or towel-dry.

One 500 ml bottle covers up to 7.5 m² (≈15 m²/L). No drying time; the area is usable as soon as rinsed.

Surface Compatibility

The low-porosity, acid-resistant structure of porcelain, ceramic, and glass-mosaic stands up to pH 2.4, so the cleaner removes deposits without etching. It is also safe on granite, slate, basalt, concrete, quartz-composite, and clinker after a spot test. Do not use on acid-sensitive marble, limestone, or enamelled fittings.

Choosing the Right Product

For daily floor mopping outside the bathroom, use Lithofin Green Wash & Clean. For long-term stain protection on countertops, choose Lithofin Green Stain-Stop. Sanitary Cleaner focuses on fast mineral residue removal in wet areas.

Pro Tips

• Squeegee glass after every shower; you cut future limescale by 70 %.
• Warm the bathroom to 20 °C before spraying; acids act 25 % faster at this temperature.
• On horizontal joints, lay kitchen paper soaked with Sanitary Cleaner for 5 min to prevent runoff and boost penetration.