Lithofin MN Care Set for Natural Stone & Quartz Composite Countertops

Your marble kitchen island shows dull grease shadows and sticky fingerprints after every meal prep. Water alone leaves streaks, and harsh products risk etching the stone. The MN Care Kit ends the cycle with one alkaline deep cleaner and one neutral daily spray tailored to natural and composite worktops.

What MN Care Kit Does

MN Care Kit is a two-part system: MN Vuiloplosser is an alkaline cleaner (pH 11) that dissolves grease, wax, and soap scum; MN Easy-Clean is a neutral maintenance spray (pH 7.5) that lifts fresh spills and buffs to a streak-free finish. The first breaks down polymerised kitchen residues within 10 minutes; the second encapsulates light dirt with non-ionic surfactants and evaporates in 2 minutes, leaving no film.

When to Use

• Greasy granite hob surrounds - dilute MN Vuiloplosser 1:10.
• Etch-sensitive marble breakfast bars - spray MN Easy-Clean undiluted.
• Stained quartz-composite sinks after red-wine night - soak with Vuiloplosser 1:5.
• Daily wipe-downs of limestone splashbacks - one trigger pull of Easy-Clean per 0.5 m².
• Pre-sealing wash before applying MN Stain-Stop - Vuiloplosser 1:20.

How to Apply

1. Dilute MN Vuiloplosser with warm water (1:10 for routine, 1:5 for heavy soil) and spread with a white pad.
2. Work the solution for 5 minutes, keep wet, then rinse twice with clean water.
3. For daily care, spray MN Easy-Clean directly on the cool surface and wipe with a microfibre cloth.
4. Buff dry; surface is food-safe after 2 minutes.

One litre of diluted Vuiloplosser covers 20 m²; a 500 ml Easy-Clean bottle treats about 40 m². No curing time required.

Surface Compatibility

The kit scores excellent on marble, granite, limestone, slate, and quartz-composite because the alkaline formula lifts organic grime without acid that would etch soft Mohs 3 stones, while the neutral spray leaves no salt deposits on low-porosity substrates. Do not use the alkaline component on polished aluminium appliances.

Choosing the Right Product

For stain blocking after cleaning, use MN Stain-Stop. For restoring worn gloss on dark granite, finish with MN Polish Liquid.

Pro Tips

• Heat accelerates evaporation; cool the worktop to below 25 °C before using Easy-Clean to avoid streaks.
• Use a white melamine pad with Vuiloplosser to reach the microscopic pits of sandstone-laboratory tests show 20 % higher soil removal.
• After sealing with MN Stain-Stop, switch to Easy-Clean exclusively; alkaline cleaners can shorten sealer life by 15 % if overused.