My unglazed porcelain tiles stain easily — why?

Unglazed (or 'full-body') porcelain tiles can be surprisingly absorbent despite appearing dense. The micro-pores in the surface can trap dirt, coffee, wine, and other staining agents. This is especially common with textured or structured surfaces. The solution: seal with Lithofin KF Protective Impregnator after installation. For existing stains: deep clean with KF Intensive Cleaner first, then seal. This is one of the most common tile care issues.

How long should I leave Anti-Slip on the surface?

Contact time is critical and varies by surface type: Marble/limestone/calcareous stone: 5-8 minutes maximum (acid-sensitive). Granite/basalt/slate: 10-15 minutes (acid-resistant). Porcelain/ceramic tiles: 10-15 minutes. Always test on a small area first to check the effect. Shorter time = less texture change, less anti-slip effect. Longer time = more texture change, more anti-slip effect. Rinse very thoroughly after the contact time.

How do I remove cement haze left after tile installation?

For ceramic/porcelain tiles: use Lithofin KF Cement Residue Remover, undiluted or diluted 1:3 for light haze. Apply, leave 5 minutes, scrub, rinse thoroughly. For acid-resistant natural stone (granite, slate): use Lithofin MN Builders' Clean diluted 1:3. For acid-sensitive stone (marble, limestone, bluestone): use MN Builders' Clean diluted 1:5 to 1:10, pre-wet the surface first, and work quickly. Always rinse very thoroughly after treatment.

How do I get rid of mould in my bathroom grout?

Spray Lithofin KF Mildew-Away directly onto the mouldy grout lines. Leave 15-30 minutes. Scrub with an old toothbrush or grout brush. Rinse thoroughly. For deeply embedded mould in silicone joints: the silicone may need to be removed and replaced with mould-resistant silicone. Crucially: improve ventilation! Run the extractor fan during and 15 minutes after showering, open windows daily. Without better ventilation, mould will always return.

How do I remove limescale from my bathroom tiles?

On ceramic/porcelain tiles: Lithofin KF Ceramic-Clean is perfect — apply, leave 5-10 minutes, scrub, rinse. Safe and very effective. On granite/slate/basalt: KF Ceramic-Clean or MN Builders' Clean diluted — these stones are acid-resistant. On marble/limestone: DO NOT use acid-based limescale removers! Use Lithofin MN Power-Clean (alkaline) with gentle scrubbing. For heavy limescale on marble: carefully use a plastic scraper, then MN Power-Clean. Prevention: squeegee after showering.

How do I clean and protect dirty grout lines?

Step 1: Clean with Lithofin KF Grout Cleaner — apply directly to grout lines, leave 5-10 minutes, scrub with a brush. Step 2: For mouldy grout, use Lithofin KF Mildew-Away first. Step 3: Rinse thoroughly and allow to dry. Step 4: Apply Lithofin KF Grout Protector to seal the clean grout lines — this prevents rapid re-soiling and water absorption. The combination of cleaning + protecting gives much longer-lasting results than cleaning alone.

What is the difference between porcelain and ceramic tiles?

Both are fired clay products, but porcelain is fired at higher temperatures (1200-1300°C vs 1000-1100°C for ceramic), making it denser, harder, and less water-absorbent (< 0.5% vs 3-6% for ceramic). Porcelain is suitable for outdoor use and heavy-traffic areas. Ceramic is typically used indoors. For care purposes, both are treated similarly with KF line products. Key difference: unglazed porcelain can still absorb stains and may need KF Protective Impregnator.

What is the best way to maintain tiles in a shopping center?

For tiles in a shopping center, implement a maintenance schedule that includes daily cleaning with Lithofin KF Intensive Cleaner and weekly inspections for damage. Use Lithofin MN Stain-Stop for sealing to protect against stains and ensure the tiles remain attractive and safe for shoppers.

How can I ensure child and pet safety when using Lithofin products?

To ensure child and pet safety when using Lithofin products, always apply the products in a well-ventilated area and keep them out of reach during and after application. It is advisable to wait until the treated area is completely dry before allowing children or pets to access it. Always check the product label for specific safety instructions.

What precautions should be taken when using Lithofin products in temperature extremes?

When using Lithofin products in temperature extremes, it is important to follow the manufacturer's guidelines for optimal application conditions. Avoid using products in freezing temperatures or extreme heat, as this can affect their effectiveness and safety. Always allow products to acclimate to room temperature before use.

Portselani KKK | Kivihoolduse Küsimused

Q: What is the best way to maintain tiles in a shopping center?

For tiles in a shopping center, implement a maintenance schedule that includes daily cleaning with Lithofin KF Intensive Cleaner and weekly inspections for damage. Use Lithofin MN Stain-Stop for sealing to protect against stains and ensure the tiles remain attractive and safe for shoppers.

Q: How can I ensure child and pet safety when using Lithofin products?

To ensure child and pet safety when using Lithofin products, always apply the products in a well-ventilated area and keep them out of reach during and after application. It is advisable to wait until the treated area is completely dry before allowing children or pets to access it. Always check the product label for specific safety instructions.

Q: What precautions should be taken when using Lithofin products in temperature extremes?

When using Lithofin products in temperature extremes, it is important to follow the manufacturer's guidelines for optimal application conditions. Avoid using products in freezing temperatures or extreme heat, as this can affect their effectiveness and safety. Always allow products to acclimate to room temperature before use.

Portselan — Korduma Kippuvad Küsimused

10 küsimust portselani hoolduse kohta

Minu glasuurimata portselanplaadid määrduvad kergesti — miks?

Glasuurimata (või 'läbivärvitud') portselanplaadid võivad olla üllatavalt imavad, kuigi tunduvad tihedad. Pinnal olevad mikropoorid võivad kinni püüda mustuse, kohvi, veini ja teisi määrivaid aineid. See on eriti levinud tekstuursete või struktuursete pindade puhul. Lahendus: paigaldamise järel tihendada Lithofin KF Protective Impregnatoriga. Olemasolevate plekkide puhul: esmalt puhastada süvitsi KF Intensive Cleaneriga, seejärel tihendada. See on üks levinumaid plaatide hooldusprobleeme.

Soovitatav: Lithofin KF Protective Impregnator, Lithofin KF Intensive Cleaner

Kaua peaksin Anti-Slipi pinnale jätma?

Kontaktaeg on kriitiline ja sõltub pinnatüübist: Marmor/paekivi/kaltsiumkivi: maksimaalselt 5-8 minutit (happetundlik). Graniit/basalt/kiltkivi: 10-15 minutit (happekindel). Portselan/keraamilised plaadid: 10-15 minutit. Alati testige väikesel alal, et kontrollida mõju. Lühem aeg = vähem tekstuurimuutust, väiksem libisemisvastane efekt. Pikem aeg = rohkem tekstuurimuutust, suurem libisemisvastane efekt. Loputage väga põhjalikult pärast kontakti aega.

Soovitatav: Lithofin Anti-Slip

Kuidas eemaldada plaatide paigaldamisest jäänud tsemendiloore?

Keraamiliste/portselanplaatide puhul: kasutage Lithofin KF Cement Residue Removerit, lahjendamata või lahjendatult 1:3 kerge loori jaoks. Kandke peale, laske 5 minutit seista, hõõruge, loputage põhjalikult. Happekindlate looduslike kivide (graniit, kiltkivi) puhul: kasutage Lithofin MN Builders' Clean lahjendatult 1:3. Happele tundlike kivide (marmor, paekivi, sinikivi) puhul: kasutage MN Builders' Clean lahjendatult 1:5 kuni 1:10, niisutage pind eelnevalt ja töötage kiiresti. Alati loputage väga põhjalikult pärast töötlemist.

Soovitatav: Lithofin KF Cement Residue Remover, Lithofin MN Builders' Clean

Kuidas vabaneda hallitusest vannitoa vuugivahedes?

Pihustage Lithofin KF Mildew-Away otse hallitanud vuugijoontele. Laske 15-30 minutit seista. Hõõruge vana hambaharja või vuugiharjaga. Loputage põhjalikult. Sügavalt sisse imbunud hallituse puhul silikoonühendustes: silikoon võib olla vaja eemaldada ja asendada hallituskindla silikooniga. Oluline: parandage ventilatsiooni! Käivitage väljatõmbeventilaator duši ajal ja 15 minutit pärast seda, avage aknad iga päev. Ilma parema ventilatsioonita tuleb hallitus alati tagasi.

Soovitatav: Lithofin KF Mildew-Away, Lithofin KF Grout Cleaner, Lithofin KF Grout Protector

Kuidas eemaldada katlakivi vannitoa plaatidelt?

Keraamilistel/portselanplaatidel: Lithofin KF Ceramic-Clean on ideaalne — kandke peale, laske 5-10 minutit seista, hõõruge, loputage. Ohutu ja väga tõhus. Graniit/kiltkivi/basalt: KF Ceramic-Clean või MN Builders' Clean lahjendatult — need kivid on happekindlad. Marmor/paekivi: ÄRGE kasutage happelisi katlakivieemaldajaid! Kasutage Lithofin MN Power-Clean (leeliseline) õrna hõõrumisega. Tugeva katlakivi puhul marmoril: kasutage ettevaatlikult plastkaabitsat, seejärel MN Power-Clean. Ennetamine: tõmmake pärast duši all käimist kummikaabitsaga üle.

Soovitatav: Lithofin KF Ceramic-Clean, Lithofin MN Builders' Clean, Lithofin MN Power-Clean

Kuidas puhastada ja kaitsta määrdunud vuugijooni?

Samm 1: Puhastage Lithofin KF Grout Cleaneriga — kandke otse vuugijoontele, laske 5-10 minutit seista, hõõruge harjaga. Samm 2: Hallitanud vuugijoonte puhul kasutage esmalt Lithofin KF Mildew-Away. Samm 3: Loputage põhjalikult ja laske kuivada. Samm 4: Kandke Lithofin KF Grout Protector puhastele vuugijoontele — see hoiab ära kiire määrdumise ja vee imendumise. Puhastamise ja kaitsmise kombinatsioon annab palju kauakestvama tulemuse kui ainult puhastamine.

Soovitatav: Lithofin KF Grout Cleaner, Lithofin KF Mildew-Away, Lithofin KF Grout Protector

Mis vahe on portselan- ja keraamilistel plaatidel?

Mõlemad on põletatud savitooted, kuid portselan põletatakse kõrgematel temperatuuridel (1200-1300°C vs 1000-1100°C keraamika puhul), muutes selle tihedamaks, kõvemaks ja vähem vett imavaks (< 0,5% vs 3-6% keraamika puhul). Portselan sobib välitingimustesse ja suure liiklusega aladele. Keraamika kasutatakse tavaliselt siseruumides. Hoolduse eesmärgil töödeldakse mõlemat sarnaselt KF tootesarjaga. Peamine erinevus: glasuurimata portselan võib siiski plekke imada ja vajada KF Protective Impregnatorit.

Soovitatav: Lithofin KF Protective Impregnator

Kuidas hooldada plaate kaubanduskeskuses?

Kaubanduskeskuse plaatide puhul rakendage hoolduskava, mis sisaldab igapäevast puhastust Lithofin KF Intensive Cleaneriga ja iganädalasi kahjustuste ülevaatusi. Kasutage Lithofin MN Stain-Stopi tihendamiseks, et kaitsta plekkide eest ja tagada, et plaadid jääksid atraktiivseks ja ohutuks ostlejatele.

Soovitatav: Lithofin KF Intensive Cleaner, Lithofin MN Stain-Stop

Kuidas tagada laste ja lemmikloomade ohutus Lithofin toodete kasutamisel?

Laste ja lemmikloomade ohutuse tagamiseks Lithofin toodete kasutamisel kandke tooteid alati hästi ventileeritud alal ja hoidke neid kättesaamatus kohas kasutamise ajal ja pärast seda. Soovitatav on oodata, kuni töödeldud ala on täielikult kuiv, enne kui lasete lastel või lemmikloomadel sellele ligi pääseda. Kontrollige alati toote etiketti konkreetsete ohutusjuhiste saamiseks.

Soovitatav: Lithofin MN Easy-Clean

Milliseid ettevaatusabinõusid tuleks rakendada Lithofin toodete kasutamisel äärmuslikes temperatuurides?

Kui kasutate Lithofin tooteid äärmuslikes temperatuurides, on oluline järgida tootja juhiseid optimaalseks pealekandmise tingimusteks. Vältige toodete kasutamist külmumistemperatuuridel või äärmuslikus kuumuses, kuna see võib mõjutada nende tõhusust ja ohutust. Laske toodetel alati enne kasutamist toatemperatuuriga kohaneda.

Soovitatav: Lithofin MN Easy-Clean

Vajate abi portselaniga?

Kasutage LithoFinderi nõustajat isikupärastatud tootesoovituste saamiseks.

Lithofinder →