Perguntas Frequentes sobre Granito | Cuidados com Pedra

Q: How long should I leave Anti-Slip on the surface?

Contact time is critical and varies by surface type: Marble/limestone/calcareous stone: 5-8 minutes maximum (acid-sensitive). Granite/basalt/slate: 10-15 minutes (acid-resistant). Porcelain/ceramic tiles: 10-15 minutes. Always test on a small area first to check the effect. Shorter time = less texture change, less anti-slip effect. Longer time = more texture change, more anti-slip effect. Rinse very thoroughly after the contact time.

Granite — Frequently Asked Questions

68 questions about caring for granite

What is the difference between an impregnator and a sealer/coating?

An impregnator (like MN Stain-Stop or MN Basic Protection) penetrates into the stone pores and works from within. It does not change the surface appearance and allows the stone to breathe (water vapour can still pass through). A sealer or coating (like TC Sealant) forms a visible layer on top of the surface, creating a film finish. Impregnators are generally preferred for natural stone as they maintain the natural look and breathability, while coatings are sometimes used on cotto/terracotta for a specific aesthetic effect.

Why does pH matter when cleaning stone?

pH determines whether a product is acidic (pH < 7), neutral (pH 7), or alkaline (pH > 7). Calcareous stones like marble, limestone, travertine, and terrazzo are chemically attacked by acids — even mild ones like vinegar or lemon juice dissolve the calcium carbonate. These stones require pH-neutral or alkaline cleaners. Siliceous stones like granite, slate, and basalt are acid-resistant and can tolerate a wider pH range. Always match the cleaner's pH to your stone type.

What is the difference between calcareous and siliceous stone?

Calcareous stones (marble, limestone, travertine, bluestone, terrazzo) are composed primarily of calcium carbonate. They react with acid — even a drop of lemon juice causes visible etching. They are generally softer and more porous. Siliceous stones (granite, slate, basalt, sandstone) are composed primarily of silica (quartz). They are acid-resistant, generally harder, and more chemically durable. This distinction is the single most important factor in choosing the right care products.

How often should I re-seal my stone?

It depends on the surface type and usage: Kitchen countertops (high risk) — every 1-2 years. Bathroom stone — every 2-3 years. Interior floors — every 2-5 years. Outdoor terraces — every 2-3 years. The water drop test tells you when it is time: place a few drops of water on the surface and wait 5 minutes. If the water beads up, protection is still active. If it absorbs or darkens the stone, it is time to re-seal.

Why should I always test in an inconspicuous area first?

Every stone is unique — even two slabs of the same marble can react differently to a product. Testing in a hidden area (behind a door, under furniture, in a corner) lets you check for unexpected reactions: colour change, etching, darkening, or surface alteration. This is especially important for acid-containing products on stone of unknown composition, and for colour-enhancing products where the effect is permanent.

How much product do I need for my project?

Coverage varies by product and stone porosity. Typical ranges: Cleaners (diluted): 50-200 m²/L. Intensive cleaners (diluted): 5-20 m²/L. Impregnators: 5-30 m²/L (very porous stone like sandstone uses more, dense granite uses less). Apply two coats on very porous stone. As a rule of thumb: for a 20m² room, you typically need 1L of impregnator and 0.5L of concentrated cleaner.

What is the difference between marble and granite for kitchen use?

Granite is harder (6-7 Mohs vs 3-4 for marble), denser, acid-resistant, and much more forgiving of spills and heat. Marble is softer, acid-sensitive, and requires more careful use — but many people choose it for its unmatched beauty. For kitchens: granite is the practical choice (less maintenance, more durable). Marble is the aesthetic choice (more beautiful but needs more care). Both need sealing with MN Stain-Stop for kitchen use.

Recommended: Lithofin MN Stain-Stop

When should I use MN Power-Clean vs KF Intensive Cleaner?

MN Power-Clean is formulated for natural stone — optimised for marble, granite, limestone, etc. KF Intensive Cleaner is formulated for ceramic tiles, cotto, and clinker. Both are alkaline intensive cleaners. If you have a natural stone surface → MN Power-Clean. If you have ceramic/porcelain tiles, cotto, or clinker → KF Intensive Cleaner. Both are safe on all surfaces (alkaline), but each is optimised for its specific surface category.

How long should I leave OIL-EX on a stain?

Apply OIL-EX as a thick layer (5mm+) over the stain, extending 2cm beyond the stain edges. Cover with cling film to prevent the paste from drying out. Leave for: Fresh stains (< 24h old): 2-4 hours. Moderate stains (days old): 6-12 hours. Old stains (weeks/months): 12-24 hours. Very deep stains: multiple applications may be needed. After removing the paste, clean the area with MN Wash & Clean. If the stain has reduced but not disappeared, repeat the process.

Recommended: Lithofin OIL-EX, Lithofin MN Wash & Clean

How long should I leave Anti-Slip on the surface?

Contact time is critical and varies by surface type: Marble/limestone/calcareous stone: 5-8 minutes maximum (acid-sensitive). Granite/basalt/slate: 10-15 minutes (acid-resistant). Porcelain/ceramic tiles: 10-15 minutes. Always test on a small area first to check the effect. Shorter time = less texture change, less anti-slip effect. Longer time = more texture change, more anti-slip effect. Rinse very thoroughly after the contact time.

Recommended: Lithofin Anti-Slip

How do I remove cement haze left after tile installation?

For ceramic/porcelain tiles: use Lithofin KF Cement Residue Remover, undiluted or diluted 1:3 for light haze. Apply, leave 5 minutes, scrub, rinse thoroughly. For acid-resistant natural stone (granite, slate): use Lithofin MN Builders' Clean diluted 1:3. For acid-sensitive stone (marble, limestone, bluestone): use MN Builders' Clean diluted 1:5 to 1:10, pre-wet the surface first, and work quickly. Always rinse very thoroughly after treatment.

How do I remove rust stains from stone?

Use Lithofin Rust-EX — apply undiluted directly on the rust stain. Leave 5-15 minutes. Rinse thoroughly with plenty of water. On acid-sensitive stone (marble, limestone): use shorter contact time (3-5 minutes) and rinse immediately. On granite/slate/basalt: can leave longer. Repeat for stubborn stains. Important: identify and remove the rust source (metal furniture leg, nail, steel wool fragment) or the stain will recur.

Recommended: Lithofin Rust-EX

How do I remove limescale from my bathroom tiles?

On ceramic/porcelain tiles: Lithofin KF Ceramic-Clean is perfect — apply, leave 5-10 minutes, scrub, rinse. Safe and very effective. On granite/slate/basalt: KF Ceramic-Clean or MN Builders' Clean diluted — these stones are acid-resistant. On marble/limestone: DO NOT use acid-based limescale removers! Use Lithofin MN Power-Clean (alkaline) with gentle scrubbing. For heavy limescale on marble: carefully use a plastic scraper, then MN Power-Clean. Prevention: squeegee after showering.

Does the surface finish (honed vs polished) affect how I care for the stone?

Yes, significantly. Polished surfaces show etch marks and scratches more visibly, but are less porous (the polishing process partially closes pores). They need Polish Cream/Liquid for restoration but absorb less product when sealing. Honed (matte) surfaces hide imperfections better but are slightly more porous. They respond beautifully to Colour Intensifier. Tumbled and brushed surfaces are the most porous and need the most sealer. The stone type remains the same — only the product absorption and visibility of damage differs.

Natural stone vs quartz composite — which is better for a kitchen?

Quartz composite is more practical: non-porous (factory-sealed), consistent colour, very low maintenance, heat-resistant up to ~150°C. Natural stone is more beautiful: each slab is unique, natural veining, develops character over time. Granite is the most practical natural stone for kitchens (hard, acid-resistant). Marble is the most beautiful but high-maintenance. Our recommendation: if you want low maintenance, choose quartz composite. If you value natural beauty and are willing to care for it, choose natural stone with proper Lithofin protection.

Recommended: Lithofin MN Stain-Stop

Can I use a pressure washer on my stone?

Yes, but with caution. Keep minimum 30cm distance from the surface. Use a fan nozzle, not a point nozzle. Soft stone (sandstone, limestone, cotto) is more vulnerable — use lower pressure (max 100 bar). Hard stone (granite, basalt, slate) can tolerate higher pressure. Never aim at joints at close range — this can wash out joint sand/mortar. Never pressure wash polished stone (will damage the polish). Chemical pre-treatment with ALGEX or Outdoor Cleaner reduces the need for high pressure.

Does underfloor heating affect stone care?

Underfloor heating can cause stone to dry out faster, which may make some stones more susceptible to cracking and may cause impregnators to cure faster during application. When applying sealers: turn off heating 48 hours before and keep it off for 48 hours after application. The heat can cause the product to penetrate unevenly or dry too quickly on the surface. For daily care: no special considerations — normal products and routines apply.

I don't know what stone I have — how do I choose the right product?

Do the acid test: place a drop of vinegar on an inconspicuous area. If it fizzes, your stone is calcareous (treat like marble — pH-neutral products only). If no reaction, it is siliceous (acid-resistant like granite). If you are still unsure, use Lithofin EASY-CARE for daily cleaning (safe on everything) and Lithofin Stainstop PLUS for sealing (universal sealer). You can also use the Lithofinder wizard or upload a photo of your stone for AI identification.

Recommended: Lithofin EASY-CARE, Lithofin Stainstop PLUS

My floor looks hazy/cloudy after mopping — what is wrong?

This is almost always caused by product build-up from using the wrong cleaner. Supermarket floor cleaners often contain wax, silicone, or surfactants that leave a residue that builds up with every clean. Solution: deep clean with Lithofin MN Power-Clean (for stone) or KF Intensive Cleaner (for tiles) to strip the residue. Then switch to the correct daily product: MN Wash & Clean for stone, KF Conditioning Cleaner for tiles, or EASY-CARE for any surface. These products are residue-free.

Can I put hot pans directly on my stone countertop?

It depends on the stone. Natural stone (marble, granite, limestone) is generally heat-resistant and can tolerate hot pans, but thermal shock from very hot cookware can potentially cause cracking in some stones. Quartz composite should NEVER have hot pans placed directly on it — the resin binder can discolour or crack above 150°C. Best practice: always use trivets or heat pads on all countertop types. This is especially important for marble (which can yellow from heat) and quartz composite.

When should I use Stainstop PLUS instead of MN Stain-Stop?

Lithofin Stainstop PLUS is the universal version — it works on natural stone, tiles, engineered stone, AND cotto/terracotta. Use it when: 1) You have multiple surface types and want one product. 2) You are unsure about your surface type. 3) You need premium protection on mixed installations. MN Stain-Stop is specifically optimised for natural stone and gives the best results on marble, granite, limestone, etc. For pure natural stone projects, MN Stain-Stop is the better choice.

How do I care for stone around a swimming pool?

Pool surrounds face chlorinated water, UV exposure, and safety concerns. 1) Choose acid-resistant stone if possible (granite, basalt, slate) — chlorinated water is slightly acidic. 2) Apply MN Stain-Stop for maximum protection. 3) Apply Anti-Slip on smooth surfaces — essential for pool safety. 4) Rinse pool chemicals off the stone regularly. 5) Annual ALGEX treatment for biological growth. 6) Re-seal every 1-2 years (chlorine accelerates sealer breakdown). For marble pool surrounds: extra care needed — rinse chlorinated water off frequently.

What is a recommended maintenance schedule for high-traffic floors?

For high-traffic floors, a maintenance schedule should include daily sweeping and mopping, weekly deep cleaning, and monthly sealing. Use Lithofin MN Easy-Clean for daily cleaning and Lithofin MN Stain-Stop for sealing. Regular maintenance helps prevent wear and tear, ensuring the longevity of your stone floors.

Recommended: Lithofin MN Easy-Clean, Lithofin MN Stain-Stop

What are the advantages of machine cleaning versus manual cleaning for stone floors?

Machine cleaning is generally more efficient and can cover larger areas in less time compared to manual cleaning. It also provides a deeper clean, which is essential for maintaining the integrity of stone surfaces. Using products like Lithofin KF Intensive Cleaner with a machine can enhance the cleaning process.

How should I care for stone in a hotel lobby?

In a hotel lobby, regular maintenance is crucial due to high foot traffic. Daily cleaning with Lithofin MN Easy-Clean and monthly sealing with Lithofin MN Stain-Stop will help maintain the appearance and durability of the stone. Regular inspections for wear and tear are also recommended.

Recommended: Lithofin MN Easy-Clean, Lithofin MN Stain-Stop

How can I maintain stone floors in an office building?

To maintain stone floors in an office building, establish a cleaning routine that includes daily sweeping and mopping with Lithofin MN Easy-Clean. Additionally, perform a deep clean weekly with Lithofin KF Intensive Cleaner and seal the stone monthly with Lithofin MN Stain-Stop to protect against stains and wear.

What are the benefits of scheduled maintenance programs for stone care?

Scheduled maintenance programs for stone care ensure that cleaning and sealing are performed regularly, which helps to prolong the life of the stone. By using products like Lithofin MN Stain-Stop and Lithofin KF Intensive Cleaner, you can maintain the beauty and integrity of your surfaces while reducing long-term costs associated with repairs.

When should I use BERO instead of Power-Clean?

Use BERO for regular maintenance of natural stone surfaces, as it is gentle yet effective. Power-Clean is ideal for more intensive cleaning tasks, especially for heavily soiled areas. Choose BERO for routine care and Power-Clean for deep cleaning.

Recommended: Lithofin BERO, Lithofin Power-Clean

How is FVE used in stone care?

FVE is a specialized cleaner designed for the removal of stubborn stains and residues on natural stone surfaces. It is particularly effective on polished stones and can restore the original appearance. Apply it as needed for tough cleaning tasks.

Recommended: Lithofin FVE

What is the difference between an impregnator, a sealer, and a coating?

An impregnator penetrates the stone to provide internal protection against stains while maintaining the natural appearance. A sealer forms a protective layer on the surface, offering enhanced stain resistance. Coatings, on the other hand, create a thicker barrier that can alter the stone's appearance and may require more maintenance. For optimal results, consider using Lithofin MN Stain-Stop for impregnation.

What is the difference between pH neutral, alkaline, and acidic cleaners?

pH neutral cleaners are safe for all stone types and effectively remove dirt without damaging the surface. Alkaline cleaners are great for removing grease and heavy soil but may not be suitable for sensitive stones like marble. Acidic cleaners can effectively remove limescale but should be used cautiously on calcareous stones. For a safe option, use Lithofin MN Easy-Clean, which is pH neutral.

How does the care for natural stone differ from engineered stone?

Natural stone requires specific care to maintain its beauty and integrity, often needing impregnators and specialized cleaners. Engineered stone is generally more resistant to stains and scratches, allowing for easier maintenance with standard cleaners. However, both types benefit from regular cleaning and protection, such as with Lithofin products tailored for each stone type.

What are the differences between indoor and outdoor stone care products?

Indoor products are typically designed to be less aggressive and safe for use in enclosed spaces, while outdoor products are formulated to withstand weather conditions and UV exposure. Outdoor products often contain stronger protective agents to prevent moss and algae growth. For outdoor surfaces, consider using Lithofin Outdoor Cleaner and Lithofin MN Stain-Stop.

When should I use a daily cleaner versus a deep cleaner?

A daily cleaner is ideal for routine maintenance, helping to keep surfaces clean and free from light dirt. In contrast, a deep cleaner is necessary for periodic deep cleaning to remove embedded dirt and stains. Use Lithofin MN Easy-Clean for daily use and Lithofin KF Intensive Cleaner for deeper cleaning tasks.

What is the difference between cream polish and liquid polish?

Cream polish is thicker and often provides a more intense shine, making it suitable for high-gloss finishes on stone. Liquid polish is easier to apply and may be better for regular maintenance, providing a subtle shine. For best results, use Lithofin WAX for a durable finish.

How does Lithofin compare to DIY/home remedies like vinegar?

While DIY remedies like vinegar can be effective for some cleaning tasks, they can damage sensitive stone surfaces such as marble and limestone. Lithofin products are specifically formulated to clean and protect stone without causing harm. For safe and effective cleaning, choose Lithofin MN Easy-Clean over vinegar.

What is the difference between water-based and solvent-based protection?

Water-based protection is generally safer for indoor use and easier to clean up, while solvent-based protection often provides a stronger, more durable seal. However, solvent-based products may emit stronger odors and require more ventilation during application. For effective sealing, consider Lithofin MN Stain-Stop as a water-based option.

What are the differences between spray application and brush application?

Spray application allows for even coverage and is ideal for large areas, while brush application provides more control and is better for detailed work. Depending on the product and surface, one method may be more effective than the other. For example, Lithofin products can be applied using either method, depending on your needs.

What is the difference between professional grade and consumer grade products?

Professional grade products are typically more concentrated and effective, designed for heavy-duty use in commercial settings. Consumer grade products are formulated for everyday use and may be less potent but are easier to handle. Lithofin offers both types, ensuring you have the right solution for your specific needs.

Should I treat the stone before grouting?

Yes, it is advisable to treat the stone with a product like Lithofin MN Stain-Stop before grouting. This helps to prevent grout stains and makes cleaning easier. Ensure the stone is dry and clean before applying the treatment.

Recommended: Lithofin MN Stain-Stop

How long should I wait before sealing new stone?

It is recommended to wait at least 7 days before sealing new stone to allow any moisture to evaporate. Use Lithofin MN Stain-Stop for effective sealing once the stone is dry. Always check the specific product instructions for the best results.

Recommended: Lithofin MN Stain-Stop

Can I change from one protection product to another?

Yes, you can change from one protection product to another, but it's important to properly clean the stone first. Use Lithofin Wexa to remove any residues from the previous product before applying a new one like Lithofin MN Stain-Stop. Always follow the product guidelines for best results.

Recommended: Lithofin Wexa, Lithofin MN Stain-Stop

How do I prepare stone for re-polishing?

To prepare stone for re-polishing, first clean the surface with Lithofin Wexa to remove any dirt and residues. After cleaning, you may need to use a grinding pad for any deep scratches before applying Lithofin Polish. Ensure the stone is completely dry before starting the polishing process.

Recommended: Lithofin Wexa, Lithofin Polish

What are biodegradable stone care products?

Biodegradable stone care products are formulated to break down naturally without harming the environment. Lithofin offers several options that are effective yet eco-friendly, such as Lithofin WEXIM, which is designed for cleaning without leaving harmful residues. These products ensure that your stone surfaces remain clean while being kind to the planet.

Recommended: Lithofin WEXIM

Why should I choose VOC-free cleaning products?

Choosing VOC-free cleaning products is essential for maintaining good indoor air quality, especially in enclosed spaces. Lithofin's products, such as Lithofin MN Easy-Clean, are formulated without volatile organic compounds, making them safer for both users and the environment. This ensures a healthier living space while effectively cleaning your stone surfaces.

Recommended: Lithofin MN Easy-Clean

How can I conserve water while cleaning stone surfaces?

To conserve water while cleaning stone surfaces, opt for concentrated cleaning products that require less water for effective results. Lithofin's concentrated formulas, like Lithofin KF Cement Residue Remover, can be used sparingly and still deliver excellent cleaning power. Additionally, using a damp cloth instead of running water can significantly reduce water usage.

Recommended: Lithofin KF Cement Residue Remover

How do eco-friendly products improve indoor air quality?

Eco-friendly products improve indoor air quality by reducing the presence of harmful chemicals and VOCs that can cause respiratory issues and other health problems. Using products like Lithofin's Green Line range ensures that your cleaning routine supports a healthier environment. These products are designed to be effective while minimizing their impact on indoor air quality.

Recommended: Lithofin Green Line

What are Lithofin Green Line products?

Lithofin Green Line products are specifically designed to be eco-friendly and sustainable, using biodegradable ingredients and packaging. These products, such as Lithofin Green Line Stone Cleaner, are effective for cleaning various stone surfaces while adhering to strict environmental standards. They are a great choice for those looking to maintain their stone while being environmentally conscious.

Recommended: Lithofin Green Line Stone Cleaner

What eco-certifications should I look for in stone care products?

When selecting stone care products, look for eco-certifications such as EU Ecolabel or Green Seal, which indicate adherence to environmental standards. Lithofin's Green Line products carry such certifications, ensuring that you are using products that are both effective and environmentally responsible. This helps reduce your ecological footprint while maintaining your stone surfaces.

Recommended: Lithofin Green Line

How should I dispose of cleaning products responsibly?

To dispose of cleaning products responsibly, always follow local regulations regarding hazardous waste. Many Lithofin products are biodegradable, but for those that are not, check for designated disposal sites or recycling programs. Proper disposal helps prevent environmental contamination and supports sustainable practices.

Recommended: Lithofin WEXIM

What are some sustainable maintenance routines for stone care?

Sustainable maintenance routines for stone care include regular cleaning with eco-friendly products, minimizing water usage, and using natural materials for scrubbing. Lithofin's Green Line products are ideal for this, as they provide effective cleaning while being gentle on the environment. Additionally, consider using microfiber cloths to reduce waste.

Recommended: Lithofin Green Line

What are some natural cleaning solutions for stone care?

Natural cleaning solutions for stone care include vinegar and baking soda, but for a more effective and safer option, consider using Lithofin's eco-friendly products like Lithofin MN Power-Clean. These products harness the power of natural ingredients while ensuring that your stone surfaces are cleaned without harmful chemicals, making them a great choice for sustainable stone care.

Recommended: Lithofin MN Power-Clean

How can I maintain my stone surfaces sustainably?

To maintain stone surfaces sustainably, use eco-friendly cleaning products, avoid harsh chemicals, and implement regular maintenance routines. Lithofin offers a range of sustainable products, such as Lithofin MN Stain-Stop, which protects your stone while being environmentally responsible. Regularly scheduled cleanings with these products can prolong the life of your stone surfaces.

Recommended: Lithofin MN Stain-Stop

What tips do you have for eco-friendly stone care?

For eco-friendly stone care, prioritize the use of biodegradable and VOC-free products, such as Lithofin's Green Line. Regularly clean your stone surfaces to prevent buildup and use natural materials for scrubbing. Additionally, consider using a steam cleaner for deep cleaning, which reduces the need for chemical cleaners and conserves water.

Recommended: Lithofin Green Line

What are the best maintenance protocols for high-traffic floors in commercial settings?

For high-traffic floors, regular cleaning and maintenance are crucial. Use Lithofin Wexa for daily cleaning to remove dirt and grime without damaging the surface. Additionally, applying Lithofin Stain-Stop can help protect against stains and enhance the longevity of the floor. Regular maintenance schedules should be established to ensure optimal appearance and safety.

Recommended: Lithofin Wexa, Lithofin Stain-Stop

What are some cost-effective solutions for maintaining large areas in commercial spaces?

For large areas, consider using Lithofin Wexa in combination with a floor scrubber for efficient cleaning. This method reduces labor costs and time while maintaining cleanliness. Additionally, applying Lithofin Stain-Stop can prevent stains, reducing the need for frequent deep cleaning.

Recommended: Lithofin Wexa, Lithofin Stain-Stop

What is the difference between professional and consumer products for stone care?

Professional products, like those from Lithofin, are formulated for higher efficacy and larger scale use, making them ideal for commercial settings. Consumer products may not provide the same level of performance or concentration. For instance, Lithofin MN Power-Clean is designed for heavy-duty cleaning in commercial environments, unlike typical consumer cleaners.

Recommended: Lithofin MN Power-Clean

What are the specific challenges hotels and restaurants face in stone maintenance?

Hotels and restaurants face challenges such as high foot traffic and exposure to spills. Regular cleaning with Lithofin Wexa helps maintain appearance, while Lithofin Stain-Stop provides essential protection against stains. Implementing a thorough maintenance protocol can significantly enhance the longevity of stone surfaces.

Recommended: Lithofin Wexa, Lithofin Stain-Stop

What stone care products are recommended for commercial use?

For commercial use, Lithofin offers a range of products tailored for different needs. Lithofin MN Power-Clean is excellent for heavy-duty cleaning, while Lithofin Stain-Stop provides long-lasting protection against stains. Regular use of these products can ensure the durability and aesthetics of stone surfaces.

Recommended: Lithofin MN Power-Clean, Lithofin Stain-Stop

What can be done about rust stains on stone surfaces in commercial settings?

Rust stains can be particularly challenging in commercial environments. Use Lithofin Rust-Ex to effectively remove rust stains from stone surfaces. Regular maintenance and prompt attention to spills can help prevent rust formation, ensuring the longevity of your stone surfaces.

Recommended: Lithofin Rust-Ex

What daily maintenance practices should be followed for stone surfaces in commercial spaces?

Daily maintenance of stone surfaces in commercial spaces should include sweeping or vacuuming to remove debris, followed by mopping with Lithofin Wexa for effective cleaning. Additionally, applying Lithofin Stain-Stop periodically can help protect surfaces from stains and maintain their appearance.

Recommended: Lithofin Wexa, Lithofin Stain-Stop

What first aid measures should be taken in case of contact with Lithofin WAX-OFF?

In case of skin contact with Lithofin WAX-OFF, wash the affected area thoroughly with soap and water. If irritation persists, seek medical attention. For eye contact, rinse immediately with plenty of water and consult a physician. Always keep the product away from children and pets.

Recommended: Lithofin WAX-OFF

What should NOT be combined with Lithofin products?

It is important not to mix Lithofin products with other cleaning agents, especially those containing bleach or ammonia, as this can create harmful gases. Always use Lithofin products as directed and avoid combining them with any other chemicals to ensure safety and effectiveness.

Recommended: Lithofin MN Power-Clean

How can I prepare my outdoor stone for winter?

To prepare your outdoor stone for winter, it's essential to clean the surface thoroughly and apply a protective sealant. Lithofin MN Stain-Stop is ideal for this purpose, as it provides a water-repellent barrier against frost damage. Additionally, ensure that any cracks are filled to prevent water ingress, which can freeze and expand, causing further damage.

Recommended: Lithofin MN Stain-Stop

How can I protect my stone from UV damage in summer?

To protect your stone from UV damage during the summer, it’s advisable to apply a UV-resistant sealant. Lithofin MN Stain-Stop not only protects against stains but also helps to prevent color fading due to sun exposure. Regular cleaning with Lithofin Outdoor Cleaner will also help maintain the stone's integrity and appearance.

How can I prevent leaf stains on my stone in autumn?

To prevent leaf stains on your stone during autumn, it's crucial to clean up fallen leaves regularly. Additionally, applying Lithofin MN Stain-Stop can provide a protective barrier against organic stains. If stains do occur, use Lithofin Stone Cleaner to remove them promptly before they set.

Recommended: Lithofin MN Stain-Stop, Lithofin Stone Cleaner

How can I prevent frost damage to my outdoor stone?

To prevent frost damage, ensure that your stone is properly sealed with a product like Lithofin MN Stain-Stop. This will help repel water and prevent it from freezing inside the stone. Additionally, avoid using metal shovels or tools that can chip the stone when clearing snow.

Recommended: Lithofin MN Stain-Stop

What are the effects of de-icing salt on stone?

De-icing salts can cause significant damage to stone surfaces, leading to discoloration and surface deterioration. To mitigate these effects, it is advisable to use Lithofin MN Stain-Stop as a protective barrier before winter. Regular cleaning with Lithofin Outdoor Cleaner can also help remove any salt residues.

Need help with granite?

Use the LithoFinder wizard for personalised product advice.

Lithofinder →