5 Common Mistakes with Dolomite
5 Common Mistakes with Dolomite
Dolomite is a beautiful stone that requires careful maintenance to keep its charm. Avoid these common pitfalls to ensure its longevity.
Mistake #1
Using acidic cleaners
Why this is a problem
Dolomite is sensitive to acids due to its calcium magnesium carbonate composition. Acidic substances can cause etching, leaving dull spots and rough textures on the surface.
How to fix it
For light etching, use Lithofin MN Polishing Cream to restore the surface. Severe etching may require professional restoration.
Prevention
Always use pH-neutral cleaners like Lithofin MN Wash & Clean to maintain the surface without causing damage.
Mistake #2
Neglecting to seal the stone
Why this is a problem
Dolomite's medium porosity means it can absorb liquids, leading to stains from substances like wine or oil. Without sealing, these stains can become permanent.
How to fix it
Apply Lithofin MN Stain-Stop to protect against future stains. For existing stains, a poultice may be required to draw them out.
Prevention
Seal dolomite with Lithofin MN Stain-Stop immediately after installation and re-seal every 2-3 years.
Mistake #3
Allowing spills to sit
Why this is a problem
Dolomite can be slightly more forgiving than marble, but prolonged exposure to spills, especially acidic ones, can still cause damage and staining.
How to fix it
Clean spills immediately with Lithofin MN Wash & Clean to prevent absorption and etching.
Prevention
Be vigilant about wiping up spills as soon as they occur, particularly in kitchens and dining areas.
Mistake #4
Using abrasive cleaning tools
Why this is a problem
Abrasive tools can scratch the surface of dolomite, damaging its polished finish and making it more susceptible to staining and etching.
How to fix it
For minor scratches, use Lithofin MN Polishing Cream. Deep scratches may need professional attention.
Prevention
Use soft cloths or mops for cleaning, and avoid scrubbing pads or steel wool.
Mistake #5
Ignoring regular maintenance
Why this is a problem
Regular cleaning and maintenance help preserve dolomite's appearance and protect it from damage. Neglect can lead to a buildup of dirt and dullness.
How to fix it
Use Lithofin MN Power-Clean for a deep clean to remove stubborn dirt and restore the stone's natural beauty.
Prevention
Incorporate Lithofin MN Easy-Clean into your routine to keep dolomite surfaces looking fresh and vibrant.
Need help with Dolomite?
Use the LithoFinder wizard to find the right product for your dolomite surface, or read the full Dolomite care guide.