Microcement Kitchen countertop - Complete Care Guide
Microcement Kitchen countertop - Complete Care Guide
From installation to daily maintenance: everything you need to know
Initial Care (After Installation)
When: After installation and before first use
- Clean the surface with Lithofin MN Wash & Clean diluted 1:10 with water to remove any dust or residues.
- Rinse thoroughly with clean water and dry with a soft cloth.
- Apply Lithofin MN Stain-Stop evenly with a clean cloth or sponge, ensuring full coverage.
- Allow the sealer to penetrate for 15 minutes, then wipe off any excess with a dry cloth.
- Let the surface cure for at least 24 hours before use.
Products needed: Lithofin MN Wash & Clean, Lithofin MN Stain-Stop
Daily Maintenance
Frequency: After each use
- Wipe the countertop with a damp cloth using Lithofin MN Easy-Clean.
- Rinse with clean water and dry with a soft towel to prevent water spots.
- Check the surface for any stains or spills and address immediately.
Products: Lithofin MN Easy-Clean
Do NOT:
- Never use acidic cleaners like vinegar or lemon juice.
- Never use abrasive pads or scouring powders.
- Never leave spills to sit for long periods.
- Never use bleach or ammonia-based products.
- Never place hot pots or pans directly on the surface.
Periodic Deep Cleaning
Frequency: Every 3 months
- Dilute Lithofin WEXA 1:10 with water and apply to the surface.
- Allow it to dwell for 5-10 minutes without letting it dry.
- Scrub gently with a soft brush or pad.
- Rinse thoroughly with clean water and dry with a soft cloth.
Products: Lithofin WEXA
Need specific product advice?
Use our Lithofinder to find the exact right product, or learn more about Microcement.