Porcelain Kitchen backsplash - Complete Care Guide
Porcelain Kitchen backsplash - Complete Care Guide
From installation to daily maintenance: everything you need to know
Initial Care (After Installation)
When: Within 1 week of installation, after grout has cured.
- Clean the new surface with Lithofin KF Ceramic-Clean to remove any installation residues.
- Rinse thoroughly with clean water.
- Allow to dry completely (24 hours).
- Apply Lithofin KF Protective Impregnator evenly with a soft cloth.
- Remove excess after 10-15 minutes.
- Allow 24 hours to cure before use.
Products needed: Lithofin KF Ceramic-Clean, Lithofin KF Protective Impregnator
Daily Maintenance
Frequency: Daily or after each use
- Wipe surface with a damp cloth using Lithofin KF Easy-Clean.
- Clean spills immediately - especially oils and acidic substances.
- Dry the surface after cleaning to prevent water marks.
Products: Lithofin KF Easy-Clean
Do NOT:
- Never use vinegar or lemon-based cleaners.
- Never use abrasive sponges or steel wool.
- Never use bleach or chlorine-based cleaners.
- Do not leave acidic foods sitting on the surface.
Periodic Deep Cleaning
Frequency: Every 1-3 months
- Apply Lithofin KF Intensive Cleaner diluted as per instructions.
- Leave for 5-10 minutes.
- Scrub gently with a soft brush.
- Rinse thoroughly with clean water.
- Dry with a soft cloth.
Products: Lithofin KF Intensive Cleaner
Protection & Sealing
Re-seal every: Every 1-2 years (kitchen use may require more frequent re-sealing)
- Deep clean the surface first.
- Allow to dry completely (24 hours).
- Apply Lithofin KF Protective Impregnator evenly.
- Remove excess after 10-15 minutes.
- Allow to cure for 24 hours before use.
Products: Lithofin KF Protective Impregnator
Need specific product advice?
Use our Lithofinder to find the exact right product, or learn more about Porcelain.