Zellige Bathroom wall and shower - Complete Care Guide
Zellige Bathroom wall and shower - Complete Care Guide
From installation to daily maintenance: everything you need to know
Initial Care (After Installation)
When: After installation and before first use
- Clean the tiles with Lithofin KF Ceramic-Clean, diluted 1:20 with water, to remove any installation residues.
- Rinse thoroughly with clean water and allow to dry completely.
- Apply Lithofin KF Protective Impregnator evenly with a brush or roller, ensuring full coverage.
- Allow the impregnator to penetrate for 20 minutes, then wipe off any excess with a clean cloth.
- Let the surface cure for 24 hours before use.
Products needed: Lithofin KF Ceramic-Clean, Lithofin KF Protective Impregnator
Daily Maintenance
Frequency: After each use
- Wipe down the tiles with a soft cloth to remove water droplets.
- Spray Lithofin KF Bath Cleaner on the surface and wipe with a damp sponge.
- Rinse with clean water and dry with a microfiber cloth.
Products: Lithofin KF Bath Cleaner
Do NOT:
- Never use acidic cleaners as they can damage the glaze.
- Never use abrasive pads or powders; they will scratch the surface.
- Never leave coloured spills on the surface; clean immediately.
- Never use bleach or ammonia-based products.
Periodic Deep Cleaning
Frequency: Every 3 months
- Dilute Lithofin KF Ceramic-Clean 1:20 with water for a thorough clean.
- Apply the solution with a sponge and allow it to dwell for 5 minutes.
- Scrub gently with a soft brush to remove any buildup.
- Rinse thoroughly with clean water and dry the surface.
Products: Lithofin KF Ceramic-Clean
Need specific product advice?
Use our Lithofinder to find the exact right product, or learn more about Zellige.