Limestone Outdoor terrace and garden - Complete Care Guide
Limestone Outdoor terrace and garden - Complete Care Guide
From installation to daily maintenance: everything you need to know
Initial Care (After Installation)
When: Within 1 week of installation, after grout has cured
- Clean the new limestone surface with Lithofin MN Power-Clean diluted 1:10 to remove any installation residues and dirt.
- Allow the surface to dry completely for 24-48 hours.
- Apply Lithofin MN Stain-Stop evenly with a soft cloth or sponge.
- Remove any excess product after 10-15 minutes.
- Allow 24 hours for the Stain-Stop to cure before exposing the surface to moisture or heavy use.
Products needed: Lithofin MN Power-Clean, Lithofin MN Stain-Stop
Daily Maintenance
Frequency: Daily or after each use
- Wipe the surface with a damp cloth using Lithofin MN Easy-Clean (spray) or MN Wash & Clean (diluted in water).
- Clean spills immediately, especially from acidic substances like lemon juice and wine.
- Dry the surface after cleaning to prevent water marks and staining.
Products: Lithofin MN Easy-Clean, Lithofin MN Wash & Clean
Do NOT:
- Never use vinegar or lemon-based cleaners.
- Never use abrasive sponges or steel wool.
- Never use bleach or chlorine-based cleaners.
- Do not leave acidic substances sitting on the surface for extended periods.
- Avoid placing heavy objects directly on the limestone.
Periodic Deep Cleaning
Frequency: Every 1-3 months
- Apply Lithofin MN Power-Clean diluted 1:5 with a sponge to the surface.
- Leave the cleaner on the surface for 5-10 minutes.
- Gently scrub with a soft brush to remove dirt and grime.
- Rinse thoroughly with clean water to remove all residues.
- Dry the surface with a soft cloth.
Products: Lithofin MN Power-Clean
Protection & Sealing
Re-seal every: Every 1-2 years
- Deep clean the surface first using the periodic deep clean steps.
- Allow the surface to dry completely for 24-48 hours.
- Apply Lithofin MN Stain-Stop evenly across the surface.
- Remove any excess product after 10-15 minutes.
- Allow 24 hours for the Stain-Stop to cure before exposing the surface to moisture.
Products: Lithofin MN Stain-Stop
Need specific product advice?
Use our Lithofinder to find the exact right product, or learn more about Limestone.