New Bluestone Protection

To protect a newly installed bluestone surface from stains and moisture.

Step-by-Step Instructions

1. Lithofin MN Cleaning Concentrate - Thoroughly clean the bluestone surface using the cleaning concentrate to remove any dirt, dust, or residues. Rinse with clean water and allow the surface to dry completely.
   Dilution: 1:10 with water · Wait: 15 minutes · Coverage: 5-10 m²/L
2. Lithofin MN Stain-Stop - Apply the MN Stain-Stop evenly to the dry bluestone surface using a brush or roller. Ensure full coverage and allow it to penetrate for 30 minutes before wiping off any excess.
   Dilution: undiluted · Wait: 30 minutes · Coverage: 10-15 m²/L
3. Lithofin MN Stain-Stop - After the initial application, allow the surface to dry completely for at least 24 hours before using. Avoid placing heavy objects on the surface for at least 48 hours to ensure the sealant cures properly.
   Wait: 24 hours

Tips

• Make sure the surface is clean before application.
• Test the product on a small, inconspicuous area first to ensure compatibility.
• Avoid applying the product in direct sunlight or high temperatures to prevent rapid drying.

⚠️ Warnings

• Do not use on wet surfaces.
• Ensure proper ventilation during application to avoid inhalation of vapors.
• Keep away from children and pets until the surface is fully cured.

Expected Result

Protected bluestone surface ready for use.