MN

Lithofin MN Outdoor Cleaner

Art. 163-11-B

€15,95 incl. VAT
Sold out
Coverage: 5-15 m²/L
Weather-baked patio looks grey? Spray, wait, rinse – colour restored.

Heavy rain, UV and frost leave your terrace slabs blotchy; algae darken joints and barbecue grease sticks to the granite step. You spray Lithofin MN Outdoor Cleaner, wait two days and rinse: the original colour pops back and the surface loses its slippery film.

What MN Outdoor Cleaner Does

MN Outdoor Cleaner is an alkaline cleaner for outdoor stone, concrete and ceramic. The pH 12.5 formula releases active chlorine that oxidises leaf stains and tyre marks within 30 minutes and breaks protein-based dirt at the molecular level. No acid means zero etching on marble (Mohs 3) while the high alkalinity opens pores in hard granite (Mohs 7) so that rinsing flushes the grime away.

When to Use

  • Sandstone patio after winter - use ready-to-use solution, 100 ml/m².
  • Concrete driveway oil haze - apply undiluted, 67 ml/m².
  • Wood-look porcelain deck before sealing - dilute 1:3, 150 ml/m².
  • Clinker garden path with leaf marks - ready-to-use, 100 ml/m².
  • Follow-up to outdoor-cleaning step 1 (ALGEX) - undiluted, 80 ml/m².

How to Apply

  1. Remove loose dirt. Spray or water-can spread 67-200 ml/m² according to soil level.
  2. Work in with a nylon brush; keep surface wet for 20 minutes.
  3. Leave 24-48 h; reaction time is weather-dependent (5-25 °C ideal).
  4. Rinse with a hose or low-pressure washer from 30 cm distance.

Coverage: 5-15 m²/L. Allow 24 h drying before sealing or foot traffic; full curing ends after 48 h.

Surface Compatibility

The formula shines on sandstone, slate, basalt, concrete pavers, and bluestone because oxidative cleaning does not rely on acid that could pit soft minerals. It is also safe for outdoor marble, limestone, porcelain and cotto when pre-wetted. Do not use indoors or over vegetation; cover plants first.

Choosing the Right Product

For living algae or moss apply Lithofin ALGEX first; after 24-48 h rinse, then clean with MN Outdoor Cleaner. For long-term stain prevention seal the dry surface with MN Stain-Stop. Need an indoor deep clean? Pick MN Power-Clean instead.

Pro Tips

  • Warm weather (15-20 °C) accelerates oxidation by 25 %, shortening dwell time.
  • Scrub across, not along, the grout lines; this avoids detergent pooling and gives uniform colour.
  • Repeat annually in spring or autumn; regular cycles stop deep-rooted stains from setting.
Inhoud
Made in Germany
40+ years Lithofin expertise
Professional grade

Product Details
Function
Cleaning
Suitable surfaces
Marble - Stone Care Guide Granite - Stone Care Guide Limestone - Stone Care Guide Sandstone - Stone Care Guide Slate - Stone Care Guide Bluestone - Stone Care Guide Basalt - Stone Care Guide Porcelain - Stone Care Guide Ceramic - Stone Care Guide Concrete - Stone Care Guide Quartz Composite - Stone Care Guide Terrazzo - Stone Care Guide Terracotta - Stone Care Guide Cotto - Stone Care Guide Clinker - Stone Care Guide
Ideal for
Terraces and patios Garden paths Outdoor stairways Building facades Stone garden features
Application
How to apply Sprayer, watering can, or brush
Dilution
Regular
Ready to use or dilute 1:3
Heavy-growth
Undiluted
Drying / curing time Leave 24-48 hours before rinsing
Reapplication Annually (spring or autumn)
Compatibility & Safety
Do not use on
Indoor surfaces Plants and vegetation (protect before application)
Compatibility
Surface Rating Notes
Marble Good Safe for outdoor marble
Granite Excellent Ideal for outdoor granite
Limestone Good Effective on outdoor limestone
Sandstone Excellent Ideal for sandstone terraces
Slate Excellent Very effective on slate
Bluestone Excellent Great for bluestone terraces
Basalt Excellent Very effective on basalt
Porcelain Good Works on outdoor porcelain
Ceramic Good Works on outdoor ceramic
Glass mosaic Caution Not typical for outdoor use
Concrete Excellent Ideal for concrete pavers
Quartz composite Good Effective on outdoor composite
Terrazzo Good Safe for outdoor terrazzo
Terracotta Good Effective on outdoor terracotta
Cotto Good Pre-wet porous cotto first
Clinker Excellent Very effective on clinker
Safety
Avoid skin contact Do not apply on hot surfaces or in direct sunlight Keep children and pets away during dwell time
Dosage Calculator

For first application on porous stone, use 50% more product

Frequently asked questions

How long do I leave MN Outdoor Cleaner before rinsing?

Wait 24–48 hours. Oxidation continues as the solution dries; longer time equals deeper colour removal.

Can MN Outdoor Cleaner be used on outdoor marble steps?

Yes. The alkaline, acid-free formula will not etch Mohs 3 marble. Rinse thoroughly after the 24–48 h dwell.

What coverage can I expect on a concrete driveway?

Expect 5–10 m² per litre; that equals 100–200 ml per square metre depending on texture.

How often should I reapply MN Outdoor Cleaner on a slate terrace?

One treatment per year is usually enough. Plan for spring or autumn when temperatures stay between 5–25 °C.

Works great together

Complete your stone care routine with these complementary products

Frequently Asked Questions