New Slate Floor Oiling

To nourish and protect a newly installed slate floor.

Step-by-Step Instructions

1. Lithofin Clean & Shine - Thoroughly clean the slate floor using a suitable cleaner to remove any dust, dirt, or residues. Rinse with clean water and allow the surface to dry completely.
   Dilution: diluted as per product instructions · Wait: 1 hour · Coverage: 10-15 m²/L
2. MN Slate-Oil - Apply the MN Slate-Oil evenly across the surface using a clean cloth or applicator. Ensure complete coverage and allow the oil to penetrate the stone for optimal nourishment and protection.
   Dilution: undiluted · Wait: 30 minutes · Coverage: 10-15 m²/L
3. Lithofin Buffing Pad - After the oil has penetrated, buff the surface with a clean, dry cloth or a buffing pad to remove any excess oil. Allow the floor to cure for at least 24 hours before heavy use.
   Wait: 24 hours

Tips

• Ensure the slate is clean and dry before application.
• Use a soft cloth or applicator to avoid scratching the surface.
• Test the oil on a small, inconspicuous area first to ensure compatibility.

⚠️ Warnings

• Avoid walking on the surface until fully cured.
• Keep the area well-ventilated during application to prevent inhalation of fumes.
• Store the oil in a cool, dry place away from direct sunlight.

Expected Result

Nourished and protected slate floor.