Dolomite Bathroom floor - Complete Care Guide
Dolomite Bathroom floor - Complete Care Guide
From installation to daily maintenance: everything you need to know
Initial Care (After Installation)
When: Immediately after installation and before first use
- Clean the surface thoroughly with Lithofin MN Power-Clean, diluted 1:10 with water.
- Rinse well with clean water and allow to dry completely.
- Apply Lithofin MN Stain-Stop evenly using a clean cloth or applicator.
- Allow the sealer to penetrate for 15 minutes, then wipe off any excess.
- After 24 hours, apply a second coat if necessary for additional protection.
Products needed: Lithofin MN Power-Clean, Lithofin MN Stain-Stop
Daily Maintenance
Frequency: Daily or after each use
- Sweep or vacuum the floor to remove loose dirt and debris.
- Mop with a solution of Lithofin MN Wash & Clean, diluted 1:30 with water.
- Dry the floor with a clean, soft cloth to prevent water spots.
Products: Lithofin MN Wash & Clean
Do NOT:
- Never use acidic or abrasive cleaners.
- Never leave spills unattended for extended periods.
- Never use wax or oil-based products.
- Never use steel wool or scouring pads.
- Never allow water to pool on the surface.
Periodic Deep Cleaning
Frequency: Every 6 months
- Sweep or vacuum the floor to remove loose dirt.
- Apply Lithofin MN Power-Clean, diluted 1:5 with water, to the surface.
- Allow the cleaner to dwell for 10 minutes, scrubbing gently with a soft brush.
- Rinse thoroughly with clean water and dry with a soft cloth.
Products: Lithofin MN Power-Clean
Need specific product advice?
Use our Lithofinder to find the exact right product, or learn more about Dolomite.