Limestone Interior floor - Complete Care Guide

Limestone Interior floor - Complete Care Guide

From installation to daily maintenance: everything you need to know

Initial Care (After Installation)

When: After grout has fully cured (7 days for limestone)

  1. After installation and grout curing, clean with Lithofin MN Power-Clean 1:10
  2. Allow to dry completely (48-72 hours for limestone)
  3. Apply Lithofin MN Stain-Stop - limestone is very porous, two coats recommended
  4. Apply second coat after 30 minutes
  5. Remove excess, allow 24 hours to cure

Products needed: Lithofin MN Power-Clean, Lithofin MN Stain-Stop

Daily Maintenance

Frequency: Daily to weekly depending on traffic

  1. Mop with Lithofin MN Wash & Clean diluted in water
  2. Sweep or vacuum first to remove grit (abrasion risk)
  3. Clean spills immediately - especially acidic liquids

Products: Lithofin MN Wash & Clean

Do NOT:

  • NEVER use acid-based cleaners - limestone is calcareous
  • NEVER use vinegar, lemon, or citric acid products
  • Do not drag furniture - use felt pads
  • Avoid excessive water - wring mop well

Periodic Deep Cleaning

Frequency: Every 3-6 months

  1. Lithofin MN Power-Clean diluted 1:5
  2. Apply, leave 5-10 minutes
  3. Scrub with soft brush
  4. Rinse thoroughly

Products: Lithofin MN Power-Clean

Protection & Sealing

Re-seal every: Every 2-3 years (limestone is porous - needs more frequent re-sealing)

  1. Deep clean first
  2. Dry completely
  3. Apply Lithofin MN Stain-Stop (two coats on very porous limestone)
  4. Remove excess, allow 24h curing

Products: Lithofin MN Stain-Stop

Troubleshooting

Etch marks from acidic spills

For polished limestone: MN Polish Cream or MN Polish Liquid. For honed limestone: light re-honing may be needed professionally.

Foot traffic wear pattern

Deep clean with MN Power-Clean, then re-seal. For polished limestone, professional re-polishing may be needed.

Efflorescence (white salt deposits)

Brush off with dry nylon brush. Clean with MN Power-Clean (alkaline). Investigate moisture source. Re-seal after drying.

Need specific product advice?

Use our Lithofinder to find the exact right product, or learn more about Limestone.