Lithofin EASY-CARE
Art. 031-11-B
Your lobby has polished marble, rough granite entrances, and ceramic restrooms. Different cleaners leave streaks or etch marks, so staff avoid mopping. EASY-CARE solves the daily-maintenance stand-off with one pH-neutral solution for every floor.
What EASY-CARE Does
EASY-CARE is a neutral maintenance cleaner for mixed stone, tile, and composite surfaces. At pH 7 it suspends dirt with non-ionic surfactants, then evaporates without residue. One 1-2 capful dose (25-50 ml) in 5 L water covers 100-200 m², leaving a micro-thin care film that boosts lustre by up to 15 % gloss units.
When to Use
- Polished bathroom marble - 2 capfuls/5 L for soap scum buildup.
- Rough granite entry steps - 2 capfuls/5 L after heavy foot traffic.
- Office ceramic flooring - 1 capful/5 L for daily walk-off dirt.
- High-porosity limestone kitchen tops - 1 capful/5 L for grease splashes.
- Post-project cleanup on mixed floors - 2 capfuls/5 L before general cleaning with stronger products.
How to Apply
- Add 1-2 capfuls (25-50 ml) EASY-CARE to 5 L warm water. Stir for 5 seconds.
- Soak microfiber mop, wring to damp; surface contact time PT0M.
- Wipe floor in overlapping passes. Rinsing not required.
- Allow floor to air-dry; traffic can resume immediately.
Covers 100-200 m² per diluted litre. No separate drying or curing time.
Surface Compatibility
The neutral formulation avoids etching acid-sensitive stones like limestone while still lifting grime from hard, low-porosity materials such as porcelain. Excellent results on sandstone, slate, concrete, terrazzo, basalt, quartz composite, and glass mosaic. Safe for terracotta and cotto, though dedicated cleaners achieve slightly deeper colour enhancement. Universal use means no stated exclusions.
Choosing the Right Product
For stain repellence after cleaning, use MN Stain-Stop. For ceramic bathroom tile that needs an additional shield against limescale, apply KF Protective Impregnator after EASY-CARE has dried.
Pro Tips
- Change mop water every 100 m²; saturated solution halves cleaning efficiency.
- Buff high-gloss marble with a dry pad after the floor dries; the care film hardens in 5 minutes and polishes easily.
- For kitchens, follow with potable-water wipe only if food regulations require zero additive residue.
Product Details
Application
- Standard
- 1-2 capfuls per 5L water
Compatibility & Safety
| Surface | Rating | Notes |
|---|---|---|
| Marble | Excellent | pH-neutral — safe for marble |
| Granite | Excellent | Works perfectly on granite |
| Limestone | Excellent | Safe for limestone |
| Sandstone | Excellent | Gentle on sandstone |
| Slate | Excellent | Good for slate |
| Bluestone | Excellent | Safe for bluestone |
| Basalt | Excellent | Works on basalt |
| Porcelain | Excellent | Safe for porcelain |
| Ceramic | Excellent | Safe for ceramic |
| Glass mosaic | Excellent | Safe for glass |
| Concrete | Excellent | Works on concrete |
| Quartz composite | Excellent | pH-neutral — ideal for quartz |
| Terrazzo | Excellent | Safe for terrazzo |
| Terracotta | Good | Works — dedicated products give slightly better results |
| Cotto | Good | Works — Cotto Easy-Clean is more specific |
| Clinker | Excellent | Works on clinker |
Dosage Calculator
Use regularly for best results
Frequently asked questions
How much EASY-CARE do I add for marble floors?
Use 1–2 capfuls (25–50 ml) in 5 L water. This cleans 150–200 m² of polished marble.
Is EASY-CARE safe on acid-sensitive limestone?
Yes. The pH-neutral formula will not etch limestone and has been lab-tested on Mohs 3 stones.
Can EASY-CARE leave streaks on porcelain tiles?
No, provided you wring the mop well and stay within 50 ml per 5 L water. Residue-free evaporation prevents streaking.
May I combine EASY-CARE with disinfectants?
Add disinfectant only in a separate pass. Mixing can neutralise surfactants and cut cleaning efficiency by 40 %.
Works well with
Works great together
Complete your stone care routine with these complementary products
