Dolomite Kitchen countertop - Complete Care Guide
Dolomite Kitchen countertop - Complete Care Guide
From installation to daily maintenance: everything you need to know
Initial Care (After Installation)
When: After installation and before first use
- Clean the surface with Lithofin MN Power-Clean diluted 1:10 with water to remove any residues from installation.
- Rinse thoroughly with clean water and dry with a soft cloth.
- Apply Lithofin MN Stain-Stop evenly using a cloth or sponge, ensuring full coverage.
- Allow the sealer to penetrate for 15 minutes, then wipe off any excess with a clean cloth.
- Let the surface cure for 24 hours before use.
Products needed: Lithofin MN Power-Clean, Lithofin MN Stain-Stop
Daily Maintenance
Frequency: Daily or after each use
- Wipe the countertop with a soft cloth dampened with Lithofin MN Easy-Clean.
- For tougher spots, use Lithofin MN Wash & Clean diluted 1:20 with water.
- Rinse with clean water and dry the surface with a soft towel.
Products: Lithofin MN Easy-Clean, Lithofin MN Wash & Clean
Do NOT:
- Never use acidic or abrasive cleaners.
- Never leave spills, especially acidic ones, unattended.
- Never use steel wool or scouring pads.
- Never place hot pots directly on the surface.
- Never cut directly on the countertop.
Periodic Deep Cleaning
Frequency: Every 6 months
- Dilute Lithofin MN Power-Clean 1:5 with water.
- Apply the solution generously and allow it to dwell for 5-10 minutes.
- Scrub gently with a soft brush or pad.
- Rinse thoroughly with clean water and dry with a cloth.
Products: Lithofin MN Power-Clean
Need specific product advice?
Use our Lithofinder to find the exact right product, or learn more about Dolomite.