Lithofin Sticker Remover
Art. 308-03-B
Price tags on a new window pane, tape residue on a granite countertop, or a stubborn label on your toolbox-each leaves a sticky mess that regular detergent will not touch. Sticker Remover 308 breaks down those adhesives within seconds, so you wipe the surface clean without scraping.
What Sticker Remover Does
Sticker Remover is a neutral, solvent-based specialist cleaner for hard surfaces. Aromatic-free hydrocarbons penetrate the adhesive layer, reducing bond strength by 80 % in under 60 seconds. The non-aqueous formula evaporates fully, leaving no film and registering pH 7 once residues are gone.
When to Use
- Price labels on porcelain tiles - use neat, 5 ml per label.
- Vinyl tape on stainless metal panels - use neat, 10 ml per 10 cm strip.
- Decals on shopfront glass - use neat, 50 ml per A4 sticker.
- Masking-tape bleed on marble window sills - spot test, then apply neat, 5 ml per spot.
- Packaging glue on concrete floors before sealing - use neat, 40 ml per m².
How to Apply
- Drip or spray Sticker Remover directly on the adhesive until the area glistens.
- Wait 30-120 seconds; scrape gently with a plastic spatula if needed.
- Wipe off liquefied adhesive with an absorbent cloth.
- Rinse stone or ceramic surfaces with a neutral cleaner if further treatment follows.
Average usage is 0.05 L per m²; 1 L treats about 20 m² of scattered residues. Surface is dry to the touch immediately after wiping.
Surface Compatibility
The solvent mix does not contain acids or alkalis, so it will not etch acid-sensitive stones such as bluestone. Low surface tension lets the product float on dense materials like basalt and ceramic, preventing shadowing. Always test on polymers or lacquered wood; do not use on acrylic glass or painted plastics prone to solvent attack.
Choosing the Right Product
For coloured marker stains, use HOME Graffitireiniger. For greasy kitchen build-up, switch to HOME Krachtreiniger. Sticker Remover stays the pick whenever the word “adhesive” appears in the problem description.
Pro Tips
- Score large stickers with a cutter; more edge area speeds penetration by 30 %.
- Warm the surface to 30 °C with a heat gun to cut dwell time in half.
- Follow with Lithofin MN Power-Clean before sealing porous stone to avoid trapping solvent traces.
Product Details
Application
Compatibility & Safety
| Surface | Rating | Notes |
|---|---|---|
| Marble | Good | Test on a small area first |
| Granite | Good | Effective but test on a small area first |
| Limestone | Caution | May affect sensitive surfaces |
| Sandstone | Caution | Test on a small area first |
| Slate | Good | Generally safe but test first |
| Bluestone | Good | Effective but test on a small area first |
| Basalt | Good | Generally safe but test first |
| Porcelain | Excellent | Safe for all porcelain types |
| Ceramic | Excellent | Safe for all ceramic types |
| Glass mosaic | Excellent | Safe for glass-mosaic surfaces |
| Concrete | Good | Effective but test on a small area first |
| Quartz composite | Good | Generally safe but test first |
| Terrazzo | Caution | Test on a small area first |
| Terracotta | Caution | May affect sensitive surfaces |
| Cotto | Caution | Test on a small area first |
| Clinker | Good | Generally safe but test first |
Dosage Calculator
Test on a small area first before full application
Frequently asked questions
Can Sticker Remover be used on marble?
Yes, pH-neutral solvents will not etch. Always spot test because some marbles absorb faster.
How long should Sticker Remover sit before wiping?
30–120 seconds dissolve 80 % of typical acrylic or rubber adhesives.
Will Sticker Remover harm car paint?
Avoid on fresh or soft paint; the solvent may dull certain clear coats in under 2 minutes.
What is the coverage rate of Sticker Remover?
Approximately 0.05 L per m²; one 250 ml bottle treats five square metres of random spots.
Works well with
Works great together
Complete your stone care routine with these complementary products
