Efflorescence - Clinker
Efflorescence - Clinker
Professional advice and the right Lithofin products for your clinker
HighEfflorescence is the white, powdery, crystalline deposit that appears on stone, brick, and concrete surfaces. It occurs when water migrates through the material, dissolves soluble salts, and carries them to the surface where the water evaporates, leaving the salt crystals behind. Primary efflorescence occurs during the first few months after installation, as construction moisture evaporates from fresh mortar, grout, or concrete.
Recommended products
Lithofin KF Intensive Cleaner diluted
View productLithofin TC Impregnator
View productStep-by-step instructions
Dry brush loose deposits. Clean with Lithofin KF Intensive Cleaner diluted 1:10. Allow to dry completely. Once moisture issue is resolved, seal with Lithofin TC Impregnator.
Expert tips
- Cotto is very porous and highly susceptible to efflorescence
- Must address moisture source or problem will recur
- Can damage the fired clay surface if salts crystallise within pores
Need help?
Use our Lithofinder for personalised advice, or contact us.