Lithofin MN Basic Protection - Usage Guide

Lithofin MN Basic Protection - Usage Guide

View product: Lithofin MN Basic Protection

Water-based impregnating sealer providing water- and dirt-repellent protection for natural stone. Does not change the appearance of the stone. Breathable — allows water vapour to pass through while repelling liquid water. Suitable for interior and exterior use.

Category: Protection Coverage: 10-30 m²/L depending on porosity Application: Cloth, sponge, brush, or roller Drying time: 24 hours before full use

Ideal For

  • Interior natural stone floors
  • Bathroom stone surfaces
  • Outdoor terraces
  • Standard protection where colour enhancement is not desired

Dilution Ratios

Situation Dilution
Standard Ready to use — do not dilute

How to Apply

Method: Cloth, sponge, brush, or roller

Coverage: 10-30 m²/L depending on porosity

Curing/drying time: 24 hours before full use

Reapplication: Every 3-5 years (interior), every 2-3 years (exterior)

Surface Compatibility

Surface Rating Notes
Marble excellent Invisible protection for marble
Granite excellent Good water repellency on granite
Limestone excellent Essential for porous limestone
Sandstone excellent Very important for porous sandstone
Bluestone excellent Essential for bluestone countertops
Terrazzo excellent Good invisible protection for terrazzo
Slate good Good protection, MN Colour Intensifier for enhanced look
Basalt good Dense basalt needs less protection
Concrete good Works well, MN Stain-Stop for maximum protection
Terracotta good Use TC Impregnator for better results on terracotta
Cotto good Use TC Impregnator for better results on cotto
Clinker good Effective basic protection for clinker
Porcelain caution Use KF Protective Impregnator instead
Ceramic caution Use KF Protective Impregnator instead
Quartz Composite caution Usually pre-sealed — check manufacturer
Glass Mosaic never Glass does not absorb — use on grout only

Do Not Use On

  • Already sealed surfaces (will not penetrate)
  • Wet surfaces
  • Surfaces below 5°C or above 25°C

Safety Precautions

  • Ensure good ventilation during application
  • Remove excess product within 10-15 minutes
  • Do not apply in direct sunlight or on hot surfaces

Works Well With

  • Lithofin MN Wash & Clean
  • Lithofin MN Power-Clean

Get this product

View product: Lithofin MN Basic Protection

Need help choosing the right product?

Use the LithoFinder wizard to get a personalised recommendation based on your surface and problem.