New Granite Countertop First Seal

To seal and protect a newly installed granite countertop from stains.

Step-by-Step Instructions

1. Lithofin MN Clean & Shine - Thoroughly clean the granite surface using a soft cloth or sponge to remove any dust, dirt, or residues. Rinse with clean water and allow the surface to dry completely.
   Wait: 15 minutes · Coverage: 10-15 m²/L
2. MN Stain-Stop - Apply MN Stain-Stop evenly to the granite surface using a clean cloth or applicator. Ensure complete coverage and allow the product to penetrate for 30 minutes.
   Dilution: undiluted · Wait: 30 minutes · Coverage: 10-15 m²/L
3. Lithofin MN Clean & Shine - After the wait time, buff the surface with a clean, dry cloth to remove any excess product. Allow the surface to cure for at least 24 hours before using the countertop. Avoid placing heavy objects or exposing the surface to water during this time.
   Wait: 24 hours

Tips

• Always test the product on a small, inconspicuous area before full application.
• Use a microfiber cloth for application to avoid lint and streaks.
• Ensure the room is well-ventilated to help the product dry properly.

⚠️ Warnings

• Ensure good ventilation during application to avoid inhaling fumes.
• Do not apply in direct sunlight or on hot surfaces as this may affect the curing process.
• Keep the product out of reach of children and pets.

Expected Result

A sealed granite countertop that is resistant to stains.