Lithofin MN Easy-Clean

Splash marks on your marble kitchen countertop, greasy fingerprints on the quartz island, water rings on the limestone vanity-daily mess builds up fast. Lithofin MN Easy-Clean removes that film in seconds, so you wipe once and move on.

What MN Easy-Clean Does

MN Easy-Clean is a neutral maintenance cleaner for natural stone, quartz, and ceramic. With a pH of 7.5 it stays within the safe zone for acid-sensitive marble. Mild surfactants lift fats, soap scum, and light limescale up to 0.1 mm thick; alcohol flashes off in under 60 seconds, leaving no streaks. Ready-to-use strength means 0 dilution errors and uniform cleaning power every time.

When to Use

• Marble kitchen countertop spot cleaning - 1:1 ready spray for 50 ml/m² (daily-maintenance)
• Granite sink surround after food prep - 1:1 ready spray for 70 ml/m²
• Limestone bathroom vanity to remove toothpaste splatter - 1:1 ready spray for 80 ml/m²
• Glass-mosaic backsplash degreasing - 1:1 ready spray for 100 ml/m² (glass mosaic)
• Porcelain coffee table rings - 1:1 ready spray for 60 ml/m²

How to Apply

1. Shake the bottle once and hold the nozzle 15 cm from the surface.
2. Spray a thin, even film-approximately 10 pumps per 1 m².
3. Wipe immediately with a clean microfiber cloth, folding the cloth to expose fresh sections.
4. Buff dry with the second side of the cloth; no rinsing required.

Covers 50-100 ml/m², so a 500 ml bottle treats 5-10 m². Surface is food-safe as soon as it is touch-dry-usually 1 minute at 20 °C. Reapply as often as you like; the neutral formulation will not build residue.

Surface Compatibility

Use confidently on granite, quartz composite, sandstone, slate, basalt, and terrazzo because the non-acidic formula will not etch or open pores. It also works on porcelain and ceramic tiles. The pH-neutral base protects acid-sensitive surfaces such as marble and limestone while removing everyday grime. Do not use Easy-Clean for large floor areas; switch to MN Wash & Clean for economy.

Choosing the Right Product

For bucket-mopping broad floors, use MN Wash & Clean (dilute 1:100). For long-term oil and wine protection, seal with MN Stain-Stop. Easy-Clean stays on standby for quick countertop wipe-downs.

Pro Tips

• Keep two microfiber cloths: one for the initial wipe, one for the final buff; this halves streak risk.
• Warm the cloth under hot water, wring out, then wipe-heat speeds evaporation by 15 % and leaves zero shadowing.
• On heavily used café bars, finish with a pass of MN Stain-Stop every six months; the sealer reduces next-day staining by up to 90 %.