Lithofin MULTI-SEAL

Your newly laid matte gres kitchen floor clouds over every time you mop, and rough terracotta in the hallway still looks dusty no matter how hard you scrub. Multi-Seal ends that cycle by locking out dirt and adding a subtle satin finish in one fast coat.

What Multi-Seal Does

Multi-Seal is a neutral film-forming protector for porous and slightly textured indoor surfaces. The solvent-acrylate resin flows into capillaries ≤0.2 mm, dries in under 10 minutes, and hardens to a 0.5 µm layer that blocks oil, coffee, and dirt while raising colour depth by up to 15 %. At 12-15 m²/L you seal an average 25 m² kitchen with 2 L.

When to Use

• Matte gres tiles in a busy kitchen - apply neat, 80 ml/m².
• Terracotta hallway that absorbs every spill - apply neat, 80 ml/m².
• Clinker mud-room floor before winter salt - apply neat, 80 ml/m².
• Rough granite window ledges for easier dusting - apply neat, 80 ml/m².
• After deep cleaning a stone shower - apply neat, 80 ml/m².

How to Apply

1. Clean the surface thoroughly and let it dry to ≤4 % moisture.
2. Pour Multi-Seal into a paint tray; do not dilute.
3. Spread evenly with an applicator or microfiber pad, working 2 m² sections and maintaining a wet edge.
4. Allow to dry 10 minutes; walk-safe immediately, full hardness after 2 hours.

Coverage 12-15 m²/L; one 1 L bottle treats a 14 m² bathroom. No re-coat needed unless traffic dulls the sheen.

Surface Compatibility

Excellent results on porcelain, ceramic, glass mosaic, terracotta, cotto, and clinker because the neutral resin bonds without etching acid-sensitive minerals. Good on marble, limestone, sandstone, slate, bluestone, basalt, granite, concrete, and terrazzo; always test first as colour enhancement varies. Do not use on any surface directly exposed to rain, UV, or freeze-thaw cycles.

Choosing the Right Product

For routine washing before sealing, use Universal Cleaner diluted 1:10. For invisible oil and wine resistance on polished stone, use Universal Stain-Stop. Multi-Seal sits between them, giving both stain protection and a satin finish.

Pro Tips

• Buff with a white pad after 15 minutes to raise gloss by an extra 5 GU; avoids streaks.
• On very porous cotto apply a second coat wet-on-wet within 5 minutes; this cuts future maintenance time by 30 %.
• Refresh high-traffic zones annually with a 1:4 mix of Multi-Seal and water; saves product and keeps a uniform sheen.