Lithofin SPLASH-STOP - Usage Guide
Lithofin SPLASH-STOP - Usage Guide
Lithofin SPLASH-STOP is a water-based special impregnator designed to protect surfaces from the penetration of water and dirt. Ideal for outdoor use, it is crucial that surfaces are completely dry before application, typically in late May or early June.
Ideal For
- natural stone
- concrete
- terracotta
- brick
- slate
How to Apply
Method: Apply evenly to the clean, dry surface using a brush, roller, or spray. Ensure thorough coverage and allow to dry completely.
Coverage: 5-10 m² per liter
Curing/drying time: 24 hours for full effectiveness
Reapplication: Every 1-2 years depending on exposure and wear
Surface Compatibility
| Surface | Rating | Notes |
|---|---|---|
| Granite | excellent | |
| Concrete | excellent | |
| Brick | excellent | |
| Marble | good | Test on a small area first. |
| Terracotta | good | Ensure surface is unsealed. |
| Slate | good | May darken the surface. |
Do Not Use On
- polished surfaces
- non-porous materials
Safety Precautions
- Avoid contact with skin and eyes
- Use in well-ventilated areas
Works Well With
- Lithofin MN Power Cleaner
Need help choosing the right product?
Use the LithoFinder wizard to get a personalised recommendation based on your surface and problem.