Lithofin MN Stain-Stop - Usage Guide
Lithofin MN Stain-Stop - Usage Guide
Premium solvent-based impregnating sealer providing maximum oil- AND water-repellent protection. The strongest protection available for natural stone. Penetrates deeply into the pore structure. Does not change the stone's appearance. Essential for kitchen countertops and high-risk areas.
Ideal For
- Kitchen countertops
- Bathroom vanities
- Outdoor terraces
- High-traffic floors
- Maximum stain protection
Dilution Ratios
| Situation | Dilution |
|---|---|
| Standard | Ready to use - do not dilute |
How to Apply
Method: Cloth, sponge, or brush
Coverage: 5-20 m²/L depending on porosity
Curing/drying time: 24 hours before full use
Reapplication: Every 3-5 years (interior), every 2-3 years (exterior)
Surface Compatibility
| Surface | Rating | Notes |
|---|---|---|
| Marble | excellent | Essential for marble in kitchens |
| Granite | excellent | Maximum protection for granite countertops |
| Limestone | excellent | Critical for porous limestone |
| Sandstone | excellent | Apply two coats on very porous sandstone |
| Slate | excellent | Deep penetration on slate |
| Bluestone | excellent | Essential for bluestone countertops |
| Concrete | excellent | Very effective on porous concrete |
| Terrazzo | excellent | Good deep protection for terrazzo |
| Basalt | good | Dense basalt may need less product |
| Terracotta | good | Works well, also consider TC Impregnator |
| Cotto | good | Works well, also consider TC Impregnator |
| Clinker | good | Effective protection for outdoor clinker |
| Porcelain | caution | Use KF Protective Impregnator for ceramics |
| Ceramic | caution | Use KF Protective Impregnator for ceramics |
| Quartz Composite | caution | Usually pre-sealed - check with manufacturer |
| Glass Mosaic | never | Glass is non-porous |
Do Not Use On
- Already sealed surfaces
- Wet surfaces
- Polished surfaces where residue cannot be removed
Safety Precautions
- Solvent-based - ensure excellent ventilation
- Flammable - keep away from flames and sparks
- Wear gloves
- Remove excess within 10-15 minutes - dried residue is very difficult to remove
Works Well With
- Lithofin MN Wash & Clean
- Lithofin MN Easy-Clean
Need help choosing the right product?
Use the LithoFinder wizard to get a personalised recommendation based on your surface and problem.